{"title":"Digital Mixing Desks","description":"","products":[{"product_id":"phoenix-audio-nicerizer","title":"Phoenix Audio Nicerizer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePhoenix Audio Nicerizer\u003c\/strong\u003e is a sixteen channel Class-A analogue summing mixer. Discrete, transformerless input stages feed two mix busses and a DSOP-2 output stage carrying a pair of custom-wound DB694 transformers.\u003c\/p\u003e\n\n\u003ch3\u003eSixteen channels leaving the computer\u003c\/h3\u003e\n\u003cp\u003eSumming inside the box is mathematically correct, and that is exactly why it sounds flat: everything sits on the same plane. The Nicerizer takes sixteen tracks or stems out to separate analogue inputs, where each signal passes its own Class-A stage before it reaches the bus. What you hear is not equalisation but depth: instruments spread front to back and peaks stop clumping together. Every channel has its own detented pan control, so the stereo image is built in analogue rather than in the faders of a DAW.\u003c\/p\u003e\n\n\u003ch3\u003eStereo width and a Drive button per channel\u003c\/h3\u003e\n\u003cp\u003eThe width control runs in Class-A and sweeps from full mono to an image 25 percent wider, with a separate bypass when you want to compare. A Drive button on each channel adds transformer saturation where you want it and leaves the signal clean where you do not. Insert points on both busses let you patch a mastering compressor across the sum, while a separate monitor output with a channel pair selector gives you a listen without untangling cables at the back of the rack.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSixteen channels of discrete Class-A summing\u003c\/li\u003e\n\u003cli\u003eTransformerless, balanced input stages\u003c\/li\u003e\n\u003cli\u003eTwo mix busses with a stereo XLR output\u003c\/li\u003e\n\u003cli\u003eSixteen detented pan controls\u003c\/li\u003e\n\u003cli\u003eStereo width control from mono to plus 25 percent\u003c\/li\u003e\n\u003cli\u003eBypass on the width control for quick comparison\u003c\/li\u003e\n\u003cli\u003eDrive button on every channel\u003c\/li\u003e\n\u003cli\u003eInsert points on the left and right busses\u003c\/li\u003e\n\u003cli\u003eTwo track input on balanced TRS jacks\u003c\/li\u003e\n\u003cli\u003eMonitor and headphone output with channel pair select\u003c\/li\u003e\n\u003cli\u003eAuxiliary outputs with front panel level control\u003c\/li\u003e\n\u003cli\u003eDSOP-2 output stage with DB694 transformers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 16\u003c\/li\u003e\n\u003cli\u003eMix busses: 2, stereo configuration\u003c\/li\u003e\n\u003cli\u003eInput stages: discrete, balanced, transformerless\u003c\/li\u003e\n\u003cli\u003eOutput transformers: 2 x custom-wound DB694\u003c\/li\u003e\n\u003cli\u003eOutput stage: DSOP-2, discrete, Class-A\u003c\/li\u003e\n\u003cli\u003eMaximum output level: +26 dB\u003c\/li\u003e\n\u003cli\u003eMain outputs: balanced XLR\u003c\/li\u003e\n\u003cli\u003eInsert points: unbalanced TRS jacks on both busses\u003c\/li\u003e\n\u003cli\u003eTwo track input: balanced TRS jacks\u003c\/li\u003e\n\u003cli\u003eWidth control: mono to plus 25 percent\u003c\/li\u003e\n\u003cli\u003eMetering: LED level array\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Phoenix Audio","offers":[{"title":"Default Title","offer_id":58444370575692,"sku":"46838","price":2999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PhoenixAudioNicerizer.jpg?v=1786977945"},{"product_id":"phoenix-audio-scion","title":"Phoenix Audio Scion","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePhoenix Audio Scion\u003c\/strong\u003e is a sixteen channel analogue summing mixer with four stereo busses, the newest design in the Nicerizer line. Discrete transformerless Class-A input stages feed a DSOP-2 output stage with custom-wound DB694 transformers.\u003c\/p\u003e\n\n\u003ch3\u003eFour stereo busses, four characters\u003c\/h3\u003e\n\u003cp\u003eAn ordinary summing mixer gives you one sound, and it either suits the material or it does not. The Scion sends the same mix to four independent stereo outputs: Color, Clean, Mix and Super Iron, each with a different degree of transformer saturation. You record all four at once to separate tracks and choose later at the monitors, instead of repatching and running the pass again. On top of that, a Drive button on each channel decides individually which tracks get saturation and which stay clean.\u003c\/p\u003e\n\n\u003ch3\u003eExpansion to thirty-two channels\u003c\/h3\u003e\n\u003cp\u003eSixteen channels arrive on two balanced D-sub connectors that accept balanced and unbalanced signals alike with no loss of level. When a session outgrows one unit, the bus linking option ties two Scions into a thirty-two channel system working across a common sum. Every channel has its own detented pan control, the stereo width control runs from mono to an image 25 percent wider, and insert points on the busses take a mastering compressor.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSixteen channels of discrete Class-A summing\u003c\/li\u003e\n\u003cli\u003eEight mix busses arranged as four stereo pairs\u003c\/li\u003e\n\u003cli\u003eFour stereo outputs: Color, Clean, Mix and Super Iron\u003c\/li\u003e\n\u003cli\u003eDrive button on every channel\u003c\/li\u003e\n\u003cli\u003eExpansion to thirty-two channels through bus linking\u003c\/li\u003e\n\u003cli\u003eTwo balanced eight channel D-sub inputs\u003c\/li\u003e\n\u003cli\u003eAccepts unbalanced signals with no loss of level\u003c\/li\u003e\n\u003cli\u003eSixteen detented pan controls\u003c\/li\u003e\n\u003cli\u003eStereo width control from mono to plus 25 percent\u003c\/li\u003e\n\u003cli\u003eInsert points on the left and right busses\u003c\/li\u003e\n\u003cli\u003eSeparate level controls for master, clean and mix outputs\u003c\/li\u003e\n\u003cli\u003ePTFE insulated, silver plated military grade wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 16, expandable to 32\u003c\/li\u003e\n\u003cli\u003eMix busses: 8, arranged as four stereo pairs\u003c\/li\u003e\n\u003cli\u003eInput stages: discrete, balanced, transformerless\u003c\/li\u003e\n\u003cli\u003eOutput stage: DSOP-2, discrete, Class-A\u003c\/li\u003e\n\u003cli\u003eOutput transformers: custom-wound DB694\u003c\/li\u003e\n\u003cli\u003eMaximum output level: +26 dB\u003c\/li\u003e\n\u003cli\u003eInputs: 2 x balanced eight channel D-sub\u003c\/li\u003e\n\u003cli\u003eOutputs: Color, Clean, Mix and Super Iron on balanced TRS\u003c\/li\u003e\n\u003cli\u003eInsert points: unbalanced TRS jacks on both busses\u003c\/li\u003e\n\u003cli\u003eWidth control: mono to plus 25 percent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Phoenix Audio","offers":[{"title":"Default Title","offer_id":58444377358668,"sku":"53686","price":2999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PhoenixAudioScion1.jpg?v=1786977954"},{"product_id":"heritage-audio-mix-buddy","title":"Heritage Audio Mix Buddy","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eHeritage Audio MIX BUDDY\u003c\/strong\u003e — a 19-input \/ 8-output desktop mixer built around instrument-level sources, using Toshiba 2SK JFET gain buffers, a dedicated mic preamp, and a transformer-based 73 DI on the main output.\n\n\u003cp\u003eThe design breaks from the usual mic\/line-first mixer layout where instruments are an afterthought. Eight HI GAIN inputs (4 stereo pairs) and six UNITY inputs (3 stereo pairs) handle low-output and high-output instrument sources on separate JFET-based paths, alongside a balanced stereo line input, a stereo FX return, and a dedicated mic channel offering up to 70 dB of gain with phantom power. Master Main Out runs through Heritage Audio's own 73 DI circuit with custom transformers, while a second master output stays transformerless and neutral.\u003c\/p\u003e\n\n\u003ch3\u003eSeparate paths for passive and active instruments\u003c\/h3\u003e\n\u003cp\u003eSplitting inputs into HI GAIN and UNITY solves the problem anyone hits when plugging a passive bass, a modular synth, and a drum machine into a standard line mixer — something is always too quiet or clipping at the input. The HI GAIN channels, with their 12 dB JFET buffers, are voiced for passive sources such as passive basses and vintage electric pianos, rewarding harder input with creamy JFET saturation rather than noise. The UNITY channels stay neutral for higher-output sources. Every instrument channel switches between stereo and mono + THRU, where the THRU output preserves the source's original impedance — letting you send a signal into the mix and out to a stage amp or outboard processor at the same time, without extra DI boxes.\u003c\/p\u003e\n\n\u003ch3\u003eAn AUX loop that replaces plugin effects with real pedals\u003c\/h3\u003e\n\u003cp\u003eEvery channel has its own AUX send with pre\/post-fader selection, and a global FX ON\/OFF switch lets you A\/B with and without effects instantly. Since the loop runs at instrument level, the mic channel's signal can be routed straight through guitar pedals — chorus, delay, reverb, distortion — and returned to the mix via the stereo FX return. This addresses a workflow producers and vocalists have wanted for a while: processing vocals through analog pedals in real time, without building a separate signal chain or adding extra hardware.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19 inputs \/ 8 outputs in a compact desktop format\u003c\/li\u003e\n\u003cli\u003e4 stereo pairs (8 channels) of HI GAIN inputs on Toshiba 2SK JFET buffers, 12 dB gain\u003c\/li\u003e\n\u003cli\u003e3 stereo pairs (6 channels) of UNITY inputs on JFET buffers with no added coloration\u003c\/li\u003e\n\u003cli\u003eBalanced stereo line input\u003c\/li\u003e\n\u003cli\u003eDedicated JFET mic preamp with up to 70 dB gain and phantom power\u003c\/li\u003e\n\u003cli\u003eStereo \/ mono + THRU switching on every instrument channel\u003c\/li\u003e\n\u003cli\u003eFull per-channel AUX section with a global FX ON\/OFF switch\u003c\/li\u003e\n\u003cli\u003eTwo independent balanced master outputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in headphone amp with dedicated level control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFormat: desktop mixer\u003c\/li\u003e\n\u003cli\u003eInputs: 19, Outputs: 8\u003c\/li\u003e\n\u003cli\u003eHI GAIN channels: 2SK JFET buffers, 12 dB gain\u003c\/li\u003e\n\u003cli\u003eUNITY channels: 2SK JFET buffers, unity gain\u003c\/li\u003e\n\u003cli\u003eMic preamp: JFET input stage, up to 70 dB gain\u003c\/li\u003e\n\u003cli\u003eMaster Main Out: Heritage Audio 73 DI circuit, custom transformers, switchable line\/mic level\u003c\/li\u003e\n\u003cli\u003eMain Out 2: transformerless output\u003c\/li\u003e\n\u003cli\u003eHeadphone output with independent level control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Heritage Audio","offers":[{"title":"Default Title","offer_id":58444396233036,"sku":"60605","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/HeritageAudioMixBuddy1.jpg?v=1786978107"},{"product_id":"burl-audio-b32-vancouver","title":"Burl Audio B32 Vancouver","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eBurl Audio B32 Vancouver\u003c\/strong\u003e – 32-channel analog summing mixer (mix bus) in a 1U format, built on a fully discrete Class-A signal path.\n\nThe unit accepts eight mono inputs, typically used for kick, snare, bass, or lead vocal, panned to the center of the stereo field, plus twenty-four stereo inputs where odd channels feed the left channel and even channels feed the right - panning of individual tracks happens in the DAW before signal reaches the D-Sub inputs. Each channel has its own 0.1%-tolerance stepped attenuator, and the entire signal path is free of capacitors, limiting the number of components that could add their own coloration before the signal reaches the stereo outputs.\n\n\u003ch3\u003eSumming 32 channels with no capacitors in the signal path\u003c\/h3\u003e\nThe absence of coupling capacitors in the signal path, combined with a discrete Class-A path and precise stepped attenuators, delivers the depth and stereo width typical of summing on a large-format analog console, without losing transparency while summing all 32 channels at once. That addresses the flat-sounding character common to in-the-box digital summing, where every track is mixed within a single numerical domain with no physical signal separation.\n\n\u003ch3\u003eSwitchable tone and saturation without leaving the mix\u003c\/h3\u003e\nThe switchable BX5 output transformer adds an alternate tonal character at the push of a button, and the Gain Boost function pushes the summing amplifier's gain by 6 dB, simulating the characteristic compression and harmonic saturation of a classic two-track tape machine. Both effects can be engaged independently at the mixing stage, without reaching for a separate outboard processor or routing the signal through an extra device in the chain.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e32 input channels: 8 mono (center-panned) and 24 stereo\u003c\/li\u003e\n\u003cli\u003eFully discrete Class-A analog path, no capacitors in the signal chain\u003c\/li\u003e\n\u003cli\u003eAudiophile stepped attenuators with 0.1% tolerance\u003c\/li\u003e\n\u003cli\u003eSwitchable BX5 output transformer\u003c\/li\u003e\n\u003cli\u003eGain Boost function adding +6 dB for tape-like saturation\u003c\/li\u003e\n\u003cli\u003eTwo stereo outputs, 1U format\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDevice type: analog summing mixer (mix bus)\u003c\/li\u003e\n\u003cli\u003eNumber of input channels: 32 (8 mono + 24 stereo)\u003c\/li\u003e\n\u003cli\u003eNumber of outputs: 2 (dual stereo)\u003c\/li\u003e\n\u003cli\u003eSignal path: discrete, Class-A, no capacitors\u003c\/li\u003e\n\u003cli\u003eLevel control: 0.1% stepped attenuator per channel\u003c\/li\u003e\n\u003cli\u003eOutput transformer: switchable BX5\u003c\/li\u003e\n\u003cli\u003eSumming amplifier boost: +6 dB (Gain Boost)\u003c\/li\u003e\n\u003cli\u003eInput connectors: D-Sub (DB25)\u003c\/li\u003e\n\u003cli\u003eFormat: 1U rack chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Burl Audio","offers":[{"title":"Default Title","offer_id":58444432834892,"sku":"27969","price":3513.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/BurlAudioB32Vancouver.jpg?v=1786978275"},{"product_id":"dangerous-music-2-bus","title":"Dangerous Music 2 BUS +","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eDangerous Music 2-BUS+\u003c\/strong\u003e — a sixteen-channel active analog summing mixer in 2U, with three built-in analog coloring circuits: Harmonics, Paralimit, and X-Former.\n\n\u003cp\u003eDangerous Music invented the standalone analog summing mixer back in 1999 with the original 2-BUS, and the 2-BUS+ is a ground-up rebuild — a new summing circuit and a new op-amp deliver lower noise and better crosstalk than the predecessor, while keeping the same open, clear character. Sixteen input channels with signal-present LEDs, mono buttons for pairs 1-2 and 9-10, and three original coloring circuits give a tonal range running from clean, reference-grade summing to the heavily driven character of vintage analog consoles.\u003c\/p\u003e\n\n\u003ch3\u003eActive versus passive summing: why it actually matters\u003c\/h3\u003e\n\u003cp\u003eA common belief holds that passive summing boxes — simple resistor networks with an amplifier making up the lost level — are more transparent because they lack active electronics. Chris Muth points to two real problems with that approach: no common-mode rejection, which is key to low noise, and no isolation between a D\/A converter's ground and the summing circuit's ground, which leads to poor crosstalk rejection and blurred stereo imaging. The 2-BUS+'s active design gives the inputs a local ground reference shared with the summing amplifier, resulting in clean, quiet, stable summing — measurable, not just a marketing claim.\u003c\/p\u003e\n\n\u003ch3\u003eThree analog coloring circuits, none of them fixed\u003c\/h3\u003e\n\u003cp\u003eHarmonics is an odd- and even-order distortion generator running parallel to the clean signal — it subtly warms the top end and thickens the bottom, useful for example to bring out backing vocals without raising their level or sibilance. Paralimit is a FET limiter \"set to stun,\" inspired by the classic 1176 \"all buttons in\" trick, delivering instant stereo parallel compression without building a complex outboard patch and manually matching levels. X-Former is a pair of custom-wound Cinemag transformers with a proprietary core-overdrive circuit, delivering the solid, punchy sound of older analog consoles. Harmonics and Paralimit can be assigned to the whole mix or separately to channel pairs 13-14 and 15-16, with their order in the chain reversible and blended back with the dry signal via a knob — X-Former always sits in the mix bus path. A switchable stereo insert placed after all the coloring circuits lets you patch in external outboard at the very end of the chain.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSixteen-channel active analog summing\u003c\/li\u003e\n\u003cli\u003eSignal-present LED for every channel\u003c\/li\u003e\n\u003cli\u003eMono buttons for channel pairs 1-2 and 9-10\u003c\/li\u003e\n\u003cli\u003eHarmonics circuit: odd- and even-order distortion generator\u003c\/li\u003e\n\u003cli\u003eParalimit circuit: FET limiter, stereo parallel compression\u003c\/li\u003e\n\u003cli\u003eX-Former circuit: a pair of Cinemag transformers with core overdrive\u003c\/li\u003e\n\u003cli\u003eHarmonics and Paralimit assignable to the mix or channel pairs 13-14\/15-16, reversible order\u003c\/li\u003e\n\u003cli\u003eSwitchable stereo insert on the mix bus\u003c\/li\u003e\n\u003cli\u003eStepped output level control: -4 to +6dB in 0.5dB steps\u003c\/li\u003e\n\u003cli\u003eInputs on XLR and D-sub connectors, main and monitor outputs on XLR\u003c\/li\u003e\n\u003cli\u003eHand-built in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum input level: greater than +28dBu\u003c\/li\u003e\n\u003cli\u003eTHD+N at +4dBu (1kHz, unweighted, 22Hz-22kHz): below 0.0048%\u003c\/li\u003e\n\u003cli\u003eTHD+N at +22dBu: below 0.0026%\u003c\/li\u003e\n\u003cli\u003eIMD at +4dBu: below 0.0038%, IMD at +22dBu: below 0.0021%\u003c\/li\u003e\n\u003cli\u003eCrosstalk rejection: greater than 108dB at 1kHz\u003c\/li\u003e\n\u003cli\u003eNoise at unity gain (22Hz-22kHz): below -86dBu\u003c\/li\u003e\n\u003cli\u003eNoise at nominal mix setting (22Hz-22kHz): below -91dBu\u003c\/li\u003e\n\u003cli\u003eFrequency response: flat within 0.1dB from 10Hz to 50kHz\u003c\/li\u003e\n\u003cli\u003eInput impedance: 25k Ohms, balanced\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 50 Ohms, balanced\u003c\/li\u003e\n\u003cli\u003eInputs: 2x DB-25, 2x XLR; outputs: 2x XLR main, 2x XLR monitor; insert: 2x XLR send\/return\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.5 x 19\" (2U)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Dangerous Music","offers":[{"title":"Default Title","offer_id":58444447285580,"sku":"25545","price":3599.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/DangerousMusic2BUS_1.jpg?v=1786978361"},{"product_id":"dangerous-music-liaison","title":"Dangerous Music LIAISON","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eDangerous Music LIAISON\u003c\/strong\u003e — an analog signal router and insert switcher connecting up to six pieces of outboard gear across two independent stereo buses, with true hardwire bypass and preset recall.\n\n\u003cp\u003eLIAISON replaces a conventional patchbay in situations where processors need to be switched in, switched out, and reordered on the fly without physically repatching cables. The unit occupies 2U, uses XLR connectors exclusively on all six insert sends and returns, and provides a DB25 connector for monitoring both buses pre and post insert simultaneously.\u003c\/p\u003e\n\n\u003ch3\u003eInstant A\/B comparisons without repatching cables\u003c\/h3\u003e\n\u003cp\u003eSwitching runs through relays that deliver true hardwire bypass, physically removing an inactive processor from the signal path even when the unit itself lacks a bypass circuit. That means comparing two versions of a chain happens with no gap in the audio, removing the short-term memory problem that undermines critical listening when patching takes several seconds. The Flip switches reverse the order of paired inserts (1\u0026amp;2, 3\u0026amp;4, 5\u0026amp;6) at the push of a button, making it instant to audition whether a compressor should sit before or after an equalizer.\u003c\/p\u003e\n\n\u003ch3\u003eBuilding and reshaping a processing chain on the fly\u003c\/h3\u003e\n\u003cp\u003eTwo independent buses, A and B, run separate hardware chains at the same time, or can be daisy-chained into a single longer path when needed. Buss B carries an additional parallel processing loop with polarity reversal, letting a processed signal blend with the dry source without the latency a console-and-patchbay setup would introduce. Four monitor outputs on the DB25 connector feed a monitor controller directly, so either buss can be auditioned pre or post insert without touching a cable. Four onboard memory slots store complete routing configurations for instant recall, and integration with a Dangerous MASTER or a second LIAISON extends the insert count without compromising signal transparency.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSix stereo insert loops with true hardwire bypass\u003c\/li\u003e\n\u003cli\u003eFlip switches reversing the order of paired inserts 1\u0026amp;2, 3\u0026amp;4, 5\u0026amp;6\u003c\/li\u003e\n\u003cli\u003eTwo independent stereo buses A and B, chainable in series\u003c\/li\u003e\n\u003cli\u003eParallel processing loop on Buss B with polarity reversal\u003c\/li\u003e\n\u003cli\u003eFour monitor outputs (pre\/post both buses) via DB25 connector\u003c\/li\u003e\n\u003cli\u003eFour memory slots for storing and recalling configurations\u003c\/li\u003e\n\u003cli\u003e100% passive relay switching system in the main section\u003c\/li\u003e\n\u003cli\u003eBalanced XLR connectors on all six insert loops\u003c\/li\u003e\n\u003cli\u003eIntegration with a Dangerous MASTER or a second LIAISON\u003c\/li\u003e\n\u003cli\u003eSwitchable 120\/240VAC power supply\u003c\/li\u003e\n\u003cli\u003e2U rack chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency response (passive section): +0\/-0.1dB from 10Hz to 100kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (active section): +0\/-0.1dB from 10Hz to 100kHz\u003c\/li\u003e\n\u003cli\u003eMaximum level: greater than +28dBu\u003c\/li\u003e\n\u003cli\u003eNoise floor: below -94.5dBu (22Hz-22kHz bandwidth)\u003c\/li\u003e\n\u003cli\u003eTHD+N: below 0.002%\u003c\/li\u003e\n\u003cli\u003eIMD: below 0.003%\u003c\/li\u003e\n\u003cli\u003eCrosstalk rejection (passive section): greater than 124dB\u003c\/li\u003e\n\u003cli\u003eCrosstalk rejection (active section): greater than 113dB\u003c\/li\u003e\n\u003cli\u003eInput impedance: 20k Ohms\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 20 Ohms\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.75 x 19 x 12\" (4.45 x 48.3 x 30.5 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 12.5 lbs (5.67 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Dangerous Music","offers":[{"title":"Default Title","offer_id":58444448497996,"sku":"25539","price":4464.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/DangerousMusicLIAISON1.jpg?v=1786978367"},{"product_id":"dangerous-music-2-bus-xt","title":"Dangerous Music 2-BUS-XT","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eDangerous Music 2-BUS-XT\u003c\/strong\u003e — a sixteen-channel analog summing mixer in a 1U chassis, built on the 2-BUS+ circuit, with two switchable coloring circuits and full scalability into larger systems.\n\n\u003cp\u003e2-BUS-XT is a compact successor to the 2-BUS-LT, running on the same six-layer summing board found in the flagship 2-BUS+. Sixteen input channels (eight stereo pairs) arrive through two D-sub connectors, and Main and Monitor outputs run on XLR. An Expansion input lets you cascade another 2-BUS-XT, 2-BUS+, or D-BOX+ when sixteen channels stop being enough.\u003c\/p\u003e\n\n\u003ch3\u003eActive summing without compromise in a compact chassis\u003c\/h3\u003e\n\u003cp\u003eUnlike passive summing boxes, which need heavy make-up gain to restore lost signal and don't isolate a D\/A converter's ground from the audio ground, 2-BUS-XT's active circuit uses balanced receiver amplifiers with proper common-mode rejection, which translates directly into lower noise and a cleaner stereo image. Crosstalk at -109dB @ 1kHz and a maximum level above +27dBu mean the unit accepts signal from practically any D\/A converter without risking overload, and mono selectors on pairs 1-2 and 9-10 let kick and vocal sit solidly anchored to the center of the stereo field.\u003c\/p\u003e\n\n\u003ch3\u003eSignal color on demand, not baked in\u003c\/h3\u003e\n\u003cp\u003eTwo coloring circuits — X-Former (transformer-driven second-harmonic saturation adding warmth in the lower midrange) and Coherence (a parallel processor that lifts harmonic content and gently widens the stereo image, controlled by its own blend knob) — can be assigned to the whole mix, to channel pair 15-16, or switched off entirely with true hardwire bypass. Color gets added deliberately when a track calls for it, rather than being a fixed, unswitchable part of the sound baked into the unit's design — the engineer decides session by session whether to reach for it at all.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSixteen-channel active analog summing (8 stereo pairs) in a 1U chassis\u003c\/li\u003e\n\u003cli\u003eInputs on two D-sub connectors, Main and Monitor outputs on XLR\u003c\/li\u003e\n\u003cli\u003eExpansion input for cascading with another 2-BUS-XT, 2-BUS+, or D-BOX+\u003c\/li\u003e\n\u003cli\u003eMono switches for channel pairs 1-2 and 9-10\u003c\/li\u003e\n\u003cli\u003eX-Former circuit: transformer-driven second-harmonic saturation\u003c\/li\u003e\n\u003cli\u003eCoherence circuit: parallel processor widening the stereo image, with blend control\u003c\/li\u003e\n\u003cli\u003eBoth coloring circuits true hardwire bypassable, assignable to the mix or channels 15-16\u003c\/li\u003e\n\u003cli\u003eStepped output level control for the summed mix\u003c\/li\u003e\n\u003cli\u003eDesigned by Chris Muth, hand-built in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency response: ±0.1dB from 20Hz to 50kHz\u003c\/li\u003e\n\u003cli\u003eTHD: 0.004% in the audio band\u003c\/li\u003e\n\u003cli\u003eIMD: 0.004% (IMD60 4:1)\u003c\/li\u003e\n\u003cli\u003eCrosstalk at 1kHz: -109dB\u003c\/li\u003e\n\u003cli\u003eNoise floor: -82dBu (total energy in the audio band)\u003c\/li\u003e\n\u003cli\u003eMaximum level: greater than +27dBu\u003c\/li\u003e\n\u003cli\u003eNominal operating level: +4dBu\u003c\/li\u003e\n\u003cli\u003eInput impedance: 12k Ohms, balanced\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 50 Ohms, balanced (600 Ohm drive capable)\u003c\/li\u003e\n\u003cli\u003ePower consumption: 25W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Dangerous Music","offers":[{"title":"Default Title","offer_id":58444449841484,"sku":"50655","price":2479.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/DangerousMusic2-BUS-XT1.jpg?v=1786978376"},{"product_id":"dangerous-music-d-box","title":"Dangerous Music D-BOX+","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eDangerous Music D-BOX+\u003c\/strong\u003e — an eight-channel analog summing mixer combined with a monitor controller and D\/A converter in one 1U rack unit, operated from the front panel or a free mobile app.\n\n\u003cp\u003eD-BOX+ is a ground-up rebuild of the award-winning original, combining eight-channel analog summing (channels 7 and 8 switchable to mono) with five input sources, two independent headphone amplifiers, and three speaker outputs. A digitally controlled volume knob with precise L\/R matching and adjustable dim ties it all into one monitoring hub, functioning much like the center section of a large console.\u003c\/p\u003e\n\n\u003ch3\u003eFive input sources in one control hub\u003c\/h3\u003e\n\u003cp\u003eOne button switches between analog stereo, the internal eight-channel sum, USB, AES\/SPDIF, and a Bluetooth stream from any mobile device — the last one is handy for quickly auditioning a reference track from a phone without hunting for a cable. A free app for macOS, Windows, iOS, and Android mirrors the front panel: volume, dim, talkback, and input selection can be handled from a tablet next to the keyboard, and talkback can even be triggered from a smartphone over Bluetooth. USB runs driverless on macOS and needs only a simple driver install on Windows.\u003c\/p\u003e\n\n\u003ch3\u003eAnalog summing with an independently tuned monitoring section\u003c\/h3\u003e\n\u003cp\u003eThe summing section, the Selected Line output, and the USB\/AES converters each carry separately published specifications — every stage optimized for its own job, so the mix coming off eight channels doesn't share a circuit with the monitoring path, which keeps crosstalk down and noise low on both paths at once. Two independent headphone amplifiers with separate source and level selection let an engineer and an artist listen to different mixes in parallel, and three independently programmable speaker outputs can be configured with a mono option and a dedicated subwoofer. When eight channels of summing aren't enough, D-BOX+ expands with an external 2-BUS+ or 2-BUS-XT without changing any of its other functions.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEight-channel analog summing (channels 7+8 switchable to mono)\u003c\/li\u003e\n\u003cli\u003eDigitally controlled volume knob with precise L\/R matching and adjustable dim\u003c\/li\u003e\n\u003cli\u003eFive input sources: analog stereo, internal sum, USB, AES\/SPDIF, Bluetooth\u003c\/li\u003e\n\u003cli\u003eWireless audio streaming and talkback over Bluetooth\u003c\/li\u003e\n\u003cli\u003eFree remote control app for macOS, Windows, iOS, and Android\u003c\/li\u003e\n\u003cli\u003eDriverless USB operation on macOS\u003c\/li\u003e\n\u003cli\u003eBuilt-in talkback mic with push-button activation, on the unit or in the app\u003c\/li\u003e\n\u003cli\u003eTwo independent headphone amplifiers with separate source and level\u003c\/li\u003e\n\u003cli\u003eThree independently programmable speaker outputs with mono\/subwoofer option\u003c\/li\u003e\n\u003cli\u003eSumming expansion via an external 2-BUS+ or 2-BUS-XT\u003c\/li\u003e\n\u003cli\u003e1U rack chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSumming — frequency response: ±0.1dB from 10Hz to 50kHz\u003c\/li\u003e\n\u003cli\u003eSumming — THD+N at +4dBu: 0.0019%, IMD: 0.0020%\u003c\/li\u003e\n\u003cli\u003eSumming — crosstalk: greater than 114dB at 1kHz, noise: below -90dBu\u003c\/li\u003e\n\u003cli\u003eSumming — maximum input level: +27dBu\u003c\/li\u003e\n\u003cli\u003eSelected Line Output — frequency response: ±0.5dB from 10Hz to 50kHz\u003c\/li\u003e\n\u003cli\u003eSelected Line Output — THD+N: 0.0027%, IMD: 0.0027%, crosstalk: greater than 110dB\u003c\/li\u003e\n\u003cli\u003eUSB\/AES converters (96kHz) — response: ±0.5dB from 10Hz to 30kHz, THD+N at -14dBFS: 0.0027%\u003c\/li\u003e\n\u003cli\u003eUSB\/AES converters — dynamic range: greater than 106dB, crosstalk: greater than 115dB\u003c\/li\u003e\n\u003cli\u003eHeadphone amplifiers — power: 3W\/channel, THD+N: 0.0066%, minimum load 4 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Dangerous Music","offers":[{"title":"Default Title","offer_id":58444450070860,"sku":"42285","price":2999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/DangerousMusicD-BOX_1.jpg?v=1786978380"},{"product_id":"bose-t8s","title":"Bose T8S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBose T8S ToneMatch\u003c\/strong\u003e – an eight-channel digital mixer with ToneMatch processing and zEQ, eight combo XLR\/1\/4\" inputs with phantom power, a USB computer interface, and outputs to Bose L1 Pro and F1 systems via a ToneMatch cable.\u003c\/p\u003e\n\n\u003ch3\u003eToneMatch and zEQ instead of manually learning every microphone's tone\u003c\/h3\u003e\n\u003cp\u003eSelecting a microphone model or acoustic guitar type from the list for a given channel instantly loads an EQ curve tuned for that specific gear, instead of starting correction from scratch on every tour date with borrowed equipment. zEQ adds fast three-band adjustment on top of that preset, so an engineer can dial the tone into a specific room without reverting to factory settings. Eight channels with 48V phantom power and combo XLR\/1\/4\" inputs handle several condenser mics and line-level instruments at once without repatching cables between sets.\u003c\/p\u003e\n\n\u003ch3\u003eScenes and a tuner instead of separate stage devices\u003c\/h3\u003e\n\u003cp\u003eFive saved Bose scenes – Full Band, String Band, Stereo DJ, Electronic, and factory settings – switch the entire routing and effects chain with one knob, so a duo playing an acoustic set followed by a laptop playlist doesn't need to repatch cables between numbers. A built-in chromatic tuner and tap-tempo delay remove the need for a separate tuner pedal on stage, and the USB output lets you record or livestream the show at the same time without an extra audio interface.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 combo XLR\/1\/4\" inputs with 48V phantom power on every channel\u003c\/li\u003e\n\u003cli\u003eBose ToneMatch processing and zEQ for vocals and instruments\u003c\/li\u003e\n\u003cli\u003eStudio-quality effects: compressor, limiter, de-esser, noise gate, chorus, flanger, phaser, tremolo, delay, reverb\u003c\/li\u003e\n\u003cli\u003e5 saved Bose scenes plus factory settings\u003c\/li\u003e\n\u003cli\u003eBuilt-in chromatic tuner and tap-tempo delay\u003c\/li\u003e\n\u003cli\u003eUSB-A for USB drive playback, USB-B for computer interfacing\u003c\/li\u003e\n\u003cli\u003eOLED display with illuminated controls\u003c\/li\u003e\n\u003cli\u003eRugged chassis with a magnetic control-panel cover included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 8 × combo XLR\/1\/4\" (mic\/instrument\/line)\u003c\/li\u003e\n\u003cli\u003ePhantom power: 48V on all channels\u003c\/li\u003e\n\u003cli\u003eOutputs: 2 × XLR, 6 × balanced line (including 4 × 1\/4\" aux, 2 × 1\/4\" aux in, 1\/4\" stereo main out)\u003c\/li\u003e\n\u003cli\u003eUSB: USB-A (playback), USB-B (PC\/Mac interface)\u003c\/li\u003e\n\u003cli\u003eSample rate: 48 kHz \/ 24-bit\u003c\/li\u003e\n\u003cli\u003eDimensions: 214 × 311 × 83 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.9 kg\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eCompatibility: Bose L1 Pro8\/16\/32, L1 Model II\/1S, S1 Pro, F1 (via ToneMatch cable)\u003c\/li\u003e\n\u003cli\u003eIncluded: magnetic control-panel cover, universal power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Bose","offers":[{"title":"Default Title","offer_id":58444457017676,"sku":"48839","price":1010.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/BoseT8S1.jpg?v=1786978433"},{"product_id":"bose-t4s","title":"Bose T4S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBose T4S ToneMatch\u003c\/strong\u003e – a four-channel digital mixer with ToneMatch processing and zEQ, four combo XLR\/1\/4\" inputs with switchable phantom power, powered directly from an L1 system's ToneMatch port or through an optional power supply.\u003c\/p\u003e\n\n\u003ch3\u003eFour channels, one cable to the L1 system\u003c\/h3\u003e\n\u003cp\u003eThe T4S ships with a ToneMatch cable that carries both digital audio and power from an L1 Pro, L1 Model II, or 1S power stand to the mixer – unlike the T8S, which requires that cable as a separate purchase. For a solo performer or duo, that means one extra cable instead of a dedicated power supply sitting next to the mixer, which matters when playing venues with limited outlet access, like a restaurant terrace or an outdoor setup.\u003c\/p\u003e\n\n\u003ch3\u003eScenes matched to a specific part of the set\u003c\/h3\u003e\n\u003cp\u003eFive saved Bose scenes – Singer\/songwriter, DJ\/playback, Drums and bass, Electric works, and factory settings – switch the entire routing, EQ, and effects chain with one knob, so a duo moving from an acoustic set to laptop-based backing tracks doesn't need to manually reprogram channels between songs. A built-in chromatic tuner and tap-tempo delay remove the need for a separate stage pedal, and the USB-B output lets you record or livestream the show to Facebook or Instagram at the same time.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 combo XLR\/1\/4\" inputs with switchable phantom power\u003c\/li\u003e\n\u003cli\u003eBose ToneMatch processing and zEQ for vocals and instruments\u003c\/li\u003e\n\u003cli\u003eStudio-quality effects: compressor, limiter, de-esser, noise gate, chorus, flanger, phaser, tremolo, delay, reverb\u003c\/li\u003e\n\u003cli\u003e5 saved Bose scenes plus factory settings\u003c\/li\u003e\n\u003cli\u003eBuilt-in chromatic tuner and tap-tempo delay\u003c\/li\u003e\n\u003cli\u003e2 ToneMatch outputs, 2 aux sends, 2 aux inputs\u003c\/li\u003e\n\u003cli\u003eUSB-A for USB drive playback, USB-B for computer interfacing\u003c\/li\u003e\n\u003cli\u003eToneMatch cable and magnetic control-panel cover included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 4 × combo XLR\/1\/4\" (mic\/instrument\/line)\u003c\/li\u003e\n\u003cli\u003ePhantom power: switchable, on input channels\u003c\/li\u003e\n\u003cli\u003eOutputs: 2 × ToneMatch, balanced 1\/4\" TRS stereo outputs, headphone output\u003c\/li\u003e\n\u003cli\u003eAdditional I\/O: 2 × aux in, 2 × aux send\u003c\/li\u003e\n\u003cli\u003eUSB: USB-A (playback), USB-B (PC\/Mac interface)\u003c\/li\u003e\n\u003cli\u003eSample rate: 48 kHz \/ 24-bit\u003c\/li\u003e\n\u003cli\u003eDimensions: 214 × 184 × 83 mm (D × W × H)\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 1.0 kg\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eCompatibility: Bose L1 Pro8\/16\/32, L1 Model II\/1S, S1 Pro, F1\u003c\/li\u003e\n\u003cli\u003eIncluded: ToneMatch cable, magnetic control-panel cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Bose","offers":[{"title":"Default Title","offer_id":58444457083212,"sku":"48838","price":632.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/BoseT4S1.jpg?v=1786978434"},{"product_id":"igs-audio-bison-500","title":"IGS Audio BISON 500","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eIGS Audio BISON 500\u003c\/strong\u003e\n\n\u003cp\u003eThe BISON 500 is a stereo M\/S matrix with a parallel dry\/wet mixer in API 500 format, built by IGS Audio as a routing tool that extends the capabilities of any existing dual-mono or two mono compressors and equalizers. The BISON itself does not process audio – its function is to encode a stereo L\/R signal into Mid\/Side before external processors, and decode it back to stereo L\/R on the return, with a Mix knob blending the processed signal against the dry input. Two stereo TRS jack connectors on the front panel serve as send and return for external inserts, a three-position toggle switch selects the operating mode, and a large Mix knob controls the parallel blend. Electrical performance: THD+N 0.001% at 0 dBu, dynamic range 100 dB, SNR –99 dBA, frequency response 20 Hz – 20 kHz ±0.1 dB.\u003c\/p\u003e\n\n\u003ch3\u003eM\/S mode – how BISON 500 splits and reconstructs the stereo image\u003c\/h3\u003e\n\u003cp\u003eIn M\/S mode the module performs a complete analog encode and decode matrix in the signal path. The left insert channel carries the Mid signal (L+R sum – the centre of the stereo image), the right channel carries the Side signal (L–R difference – the stereo width information). A compressor patched into the left channel compresses only the centre – affecting vocals, bass, and central elements without touching the sides. A compressor on the right channel compresses only the sides – reducing or expanding stereo width independently of the centre. Two different processors can be used simultaneously: one compressor on Mid, a different one on Side, or an equalizer on one channel with no effect on the other. After the inserts BISON decodes the M\/S matrix back to stereo L\/R before the output.\u003c\/p\u003e\n\n\u003ch3\u003eParallel and Stereo – the two remaining operating modes\u003c\/h3\u003e\n\u003cp\u003eParallel mode routes the signal through the external processors and blends the result with the dry input using the Mix knob – without building a separate parallel chain on the console or in the DAW. Heavy compression at 100% wet delivers pump and density; pulling the Mix back to 30–40% restores the natural dynamic envelope while retaining the colour and weight the processor contributes. Stereo mode passes the signal through the inserts without M\/S encoding – the BISON functions as a simple stereo insert send\/return with a parallel blender. A 5-point LED VU display monitors signal level. Input impedance 2 kΩ, output impedance 600 Ω, maximum input level +22 dBu, maximum output level +22 dBu, power consumption 8 W.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStereo M\/S matrix + parallel mixer, API 500 format\u003c\/li\u003e\n\u003cli\u003eTwo stereo TRS jack connectors on the front panel (send + return)\u003c\/li\u003e\n\u003cli\u003eThree-position mode switch: M\/S \/ Parallel \/ Stereo\u003c\/li\u003e\n\u003cli\u003eMix knob – continuous dry\/wet blend\u003c\/li\u003e\n\u003cli\u003eFully analog M\/S matrix, encode and decode in the signal path\u003c\/li\u003e\n\u003cli\u003eIndependent Mid and Side processing via external processors\u003c\/li\u003e\n\u003cli\u003eVU metering: 5-point LED\u003c\/li\u003e\n\u003cli\u003eTHD+N: 0.001% at 0 dBu\u003c\/li\u003e\n\u003cli\u003eDynamic range: 100 dB\u003c\/li\u003e\n\u003cli\u003eStereo Link: yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: stereo M\/S processor + parallel mixer, API 500\u003c\/li\u003e\n\u003cli\u003eOperating modes: M\/S \/ Parallel (Dry\/Wet) \/ Stereo\u003c\/li\u003e\n\u003cli\u003eInserts: 2× stereo TRS jack (send + return, front panel)\u003c\/li\u003e\n\u003cli\u003eInput impedance: 2 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 600 Ω (balanced)\u003c\/li\u003e\n\u003cli\u003eOperating level: +4 dBu\u003c\/li\u003e\n\u003cli\u003eMaximum input level: +22 dBu\u003c\/li\u003e\n\u003cli\u003eMaximum output level: +22 dBu\u003c\/li\u003e\n\u003cli\u003eDynamic range: 100 dB\u003c\/li\u003e\n\u003cli\u003eSNR: –99 dBA\u003c\/li\u003e\n\u003cli\u003eTHD+N: 0.001% (0 dBu)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 20 kHz ±0.1 dB\u003c\/li\u003e\n\u003cli\u003eMetering: VU, 5-point LED\u003c\/li\u003e\n\u003cli\u003eStereo Link: yes\u003c\/li\u003e\n\u003cli\u003ePower consumption: 8 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"IGS Audio","offers":[{"title":"Default Title","offer_id":58444518162764,"sku":"51148","price":725.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/IGSAudioBISON500.jpg?v=1786978877"},{"product_id":"rupert-neve-designs-5088","title":"Rupert Neve Designs 5088","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eRupert Neve Designs 5088\u003c\/strong\u003e\n\u003cp\u003eThe \u003cstrong\u003e5088\u003c\/strong\u003e is \u003cstrong\u003eRupert Neve's\u003c\/strong\u003e first fully discrete console design in over thirty years — and his most technically advanced to date. Power rails running at ±45 V demanded the development of entirely new op-amp cards capable of handling that voltage while eliminating crossover distortion outright, resulting in 10 dB greater dynamic range than any previous Neve console design. Every single input and output — including inserts and monitor outputs — is coupled through custom-wound transformers designed specifically for each circuit in the desk. The console is available in modular configurations from 8 to 80+ channels, expandable in multiples of 16 as the studio grows.\u003c\/p\u003e\n\u003ch3\u003eTotal isolation across the entire signal path\u003c\/h3\u003e\n\u003cp\u003eMost large-format consoles leave insert points without transformer coupling — an accepted compromise that invites noise and ground-loop issues into the signal chain. The 5088 places custom transformers at every audio junction, including inserts, delivering a true floating ground and complete galvanic isolation throughout the desk. The result is near-zero channel crosstalk, an exceptionally low noise floor, and the kind of electrical independence between channels that matters when you're running 48 tracks and multiple outboard units simultaneously.\u003c\/p\u003e\n\u003ch3\u003eRouting depth without signal path compromise\u003c\/h3\u003e\n\u003cp\u003eEight group buses, eight aux sends per channel, four stereo FX returns, and the optional SwiftMix Automation system — with motorized faders and DAW control over Ethernet — give the 5088 the routing depth of consoles twice its footprint. Each channel strip includes switchable Line\/Tape\/Buss inputs, a transformer-coupled direct output configurable pre or post fader, Solo, Mute, and Send Follows Pan. The optional Penthouse frame accommodates Portico and Shelford signal processing modules — mic preamps, inductor EQs, dynamics processors — mounted directly into the console, keeping external patch bays to a minimum.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully discrete analog architecture — Rupert Neve's first all-discrete console design in over 30 years\u003c\/li\u003e\n\u003cli\u003eHigh-voltage discrete op-amp cards (±45 V) with zero crossover distortion\u003c\/li\u003e\n\u003cli\u003eCustom transformers on every input and output, including inserts and speaker outputs\u003c\/li\u003e\n\u003cli\u003e10 dB greater dynamic range than any previous Neve console design\u003c\/li\u003e\n\u003cli\u003eModular frame — expandable from 8 to 80+ channels in multiples of 16\u003c\/li\u003e\n\u003cli\u003eSwiftMix Automation system with motorized faders and Ethernet\/DAW integration\u003c\/li\u003e\n\u003cli\u003ePenthouse frame for Portico\/Shelford modules (mic pres, EQ, dynamics)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannel configurations: 8, 16, 32, 48, 64, 80 (multiples of 16 plus dedicated 8-channel frame)\u003c\/li\u003e\n\u003cli\u003eGroup buses: 8 (transformer-coupled inserts on each)\u003c\/li\u003e\n\u003cli\u003eAux sends: 8 per channel\u003c\/li\u003e\n\u003cli\u003eStereo FX returns: 4\u003c\/li\u003e\n\u003cli\u003eSupply rail voltage: ±45 V (90 V total)\u003c\/li\u003e\n\u003cli\u003eCircuit topology: fully discrete, single-sided, Class A\u003c\/li\u003e\n\u003cli\u003eFader: 100 mm (motorized in SwiftMix-equipped configurations)\u003c\/li\u003e\n\u003cli\u003eDirect output: transformer-coupled, switchable pre\/post fader per channel\u003c\/li\u003e\n\u003cli\u003eDynamic range: 10 dB greater than previous RND designs\u003c\/li\u003e\n\u003cli\u003eAutomation: SwiftMix — Ethernet-based DAW control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Rupert Neve Designs","offers":[{"title":"Default Title","offer_id":58444528550220,"sku":"55641","price":135000.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/RupertNeve50881.jpg?v=1786979011"},{"product_id":"korg-nts-4","title":"KORG NTS 4","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKorg NTS-4\u003c\/strong\u003e is a compact analog performance mixer with a built-in dual-channel logueSDK Mk2 effects processor, previewed at Superbooth 2026 as the latest addition to the Nu:Tekt series. Like the NTS-1 and NTS-3 before it, the NTS-4 is available exclusively as a DIY self-assembly kit. The unit handles 10 input channels — two mono and four stereo — all on 3.5mm mini jacks, while simultaneously functioning as a USB audio interface and MIDI interface. Price and release date had not been officially announced at the time of the Superbooth presentation.\u003c\/p\u003e\n\n  \u003ch3\u003e10 channels and logueSDK Mk2: programmable per-channel effects\u003c\/h3\u003e\n  \u003cp\u003eFour stereo and two mono inputs — the mono channels accepting Eurorack-level signals — cover synthesizers, drum machines, samplers, and modular gear without adapters in a compact desktop setup. Each channel has level, send, and pan controls plus dedicated cue and mute buttons, covering full monitoring and signal management without additional hardware. The built-in dual stereo effects processor runs on the same SDK Mk2 platform as the NTS-3 Kaoss Pad and NTS-1 mkII, making it fully compatible with the logue algorithm library. Effects operate per channel with two control parameters: FX Type and FX Depth. Algorithms can be modified and custom effects programmed via KORG Kontrol Editor over USB. The master section provides main mix level, cue balance, USB audio level control, and a separate headphone output volume. The main stereo output uses a full-size 1\/4\" jack — the only full-size connector on the unit.\u003c\/p\u003e\n\n  \u003ch3\u003eUSB audio interface and MIDI OUT: DAW integration and hardware sync\u003c\/h3\u003e\n  \u003cp\u003eThe USB port carries audio and MIDI simultaneously, enabling direct mix recording to a DAW without an external audio interface. The 3.5mm TRS MIDI output syncs connected drum machines, synthesizers, and grooveboxes to a clock from the computer or DAW without a dedicated MIDI controller. Delivered as a DIY kit in line with all other Nu:Tekt products, the NTS-4 requires no specialized tools or electronics knowledge — assembly is based on connecting prefabricated PCBs and mechanical components. The footprint fits directly alongside Volca series units, NTS-1, NTS-3, and desktop Eurorack setups. Korg previewed the product at Superbooth 2026, booth E100 — price and shipping date TBA.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e10 input channels: 4 x stereo + 2 x mono (Eurorack-compatible level) — all 3.5mm mini jack\u003c\/li\u003e\n    \u003cli\u003ePer-channel: level, send, pan, cue (button), mute (button)\u003c\/li\u003e\n    \u003cli\u003eBuilt-in dual stereo effects processor — logueSDK Mk2\u003c\/li\u003e\n    \u003cli\u003ePer-channel effects with two parameters: FX Type and FX Depth\u003c\/li\u003e\n    \u003cli\u003eProgrammable effect algorithms via KORG Kontrol Editor over USB\u003c\/li\u003e\n    \u003cli\u003eMaster section: main level, cue balance, USB audio level, headphone volume\u003c\/li\u003e\n    \u003cli\u003eClipping indicators (2 x LED)\u003c\/li\u003e\n    \u003cli\u003eMain stereo output: 1\/4\" jack\u003c\/li\u003e\n    \u003cli\u003eHeadphone output with independent volume control\u003c\/li\u003e\n    \u003cli\u003eUSB: simultaneous audio interface and MIDI\u003c\/li\u003e\n    \u003cli\u003eMIDI OUT: 3.5mm TRS jack\u003c\/li\u003e\n    \u003cli\u003eDIY kit format (Nu:Tekt series) — no soldering required\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eChannels: 10 (4 x stereo mini jack + 2 x mono mini jack, Eurorack-compatible)\u003c\/li\u003e\n    \u003cli\u003ePer-channel controls: level, send, pan, cue, mute\u003c\/li\u003e\n    \u003cli\u003eEffects processor: dual stereo, logueSDK Mk2 (per channel, FX Type + FX Depth)\u003c\/li\u003e\n    \u003cli\u003eMaster section: main level, cue balance, USB audio level, headphone volume, 2 x clipping LED\u003c\/li\u003e\n    \u003cli\u003eMain output: 1 x stereo 1\/4\" jack\u003c\/li\u003e\n    \u003cli\u003eHeadphone output: 1 x 3.5mm mini jack\u003c\/li\u003e\n    \u003cli\u003eUSB: audio interface + MIDI (simultaneous)\u003c\/li\u003e\n    \u003cli\u003eMIDI: 1 x TRS 3.5mm OUT\u003c\/li\u003e\n    \u003cli\u003eFormat: DIY kit (Nu:Tekt series)\u003c\/li\u003e\n    \u003cli\u003ePower: USB (details TBA)\u003c\/li\u003e\n    \u003cli\u003ePrice and availability: TBA (Superbooth 2026, booth E100)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"KORG","offers":[{"title":"Default Title","offer_id":58444542869836,"sku":"60093","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/KORGNTS4.jpg?v=1786979138"},{"product_id":"mackie-onyx16","title":"Mackie Onyx16","description":"\u003cdiv lang=\"en\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eMackie Onyx16\u003c\/strong\u003e – a 16-channel premium analog \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003estudio and live sound mixer\u003c\/a\u003e featuring 18x4 multitrack USB recording at 24-bit\/96 kHz, onboard DSP effects, SD card recording and Bluetooth streaming.\u003c\/p\u003e\n\n\u003cp\u003eAt the core of the Onyx16 are 12 award-winning Onyx mic preamps delivering up to 60 dB of gain with an EIN of –128 dBu and THD below 0.01%. The frequency response extends to 30 kHz, and adjacent channel separation sits at –90 dB at 1 kHz. Whether you're tracking a full band, mixing a live show, or producing a podcast, the Onyx16 handles it without compromise.\u003c\/p\u003e\n\n\u003ch3\u003eMultitrack recording without the bottlenecks\u003c\/h3\u003e\n\n\u003cp\u003eThe 18x4 USB multitrack mode lets you record every input channel simultaneously as a separate track in your DAW at 24-bit\/96 kHz. Stereo recording directly to SD card works independently of any computer – just hit record and go. The four-track USB return (two stereo pairs) routes DAW playback back into the mixer's channel strips for real-time monitoring and re-amping. Dedicated hardware buttons – Previous, Next, Record, Play\/Pause – combined with the full-color display keep SD card management fast and hands-on.\u003c\/p\u003e\n\n\u003ch3\u003eEQ, effects and flexible routing in a single unit\u003c\/h3\u003e\n\n\u003cp\u003eThe Perkins \"British Style\" EQ – a 3-band design with sweepable mid and hard bypass switch – is built around the Wien Bridge circuit topology originally developed by Mackie's Cal Perkins, inspired by the classic British consoles of the 1960s and '70s. The ±15 dB range with a wide, musical Q gives it a character that generic mixers in this bracket simply can't replicate. The DSP effects engine covers reverb, delay, chorus and more, with storage for 6 user presets and a dedicated FX EQ. Hi-Z switching on channels 1 and 2 allows direct guitar and bass connection without a DI box. All XLR inputs carry a 100 Hz high-pass filter and +48 V phantom power.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e12 Onyx mic preamps, up to 60 dB gain, EIN –128 dBu\u003c\/li\u003e\n  \u003cli\u003e18x4 multitrack USB recording, 24-bit\/96 kHz (Mac\/PC)\u003c\/li\u003e\n  \u003cli\u003eDirect stereo record and playback via SD card\u003c\/li\u003e\n  \u003cli\u003e3-band Perkins \"British Style\" EQ with sweepable mid, ±15 dB, hard bypass\u003c\/li\u003e\n  \u003cli\u003eDSP effects engine: reverb, delay, chorus + 6 user-saveable presets\u003c\/li\u003e\n  \u003cli\u003eBluetooth streaming – wireless audio playback from mobile devices into the mix\u003c\/li\u003e\n  \u003cli\u003eHi-Z input on channels 1–2 for direct guitar\/bass connection\u003c\/li\u003e\n  \u003cli\u003e100 Hz low-cut filter and +48 V phantom power on all XLR inputs\u003c\/li\u003e\n  \u003cli\u003eControl Room outputs, Aux\/Monitor sends, headphone output with dedicated level control\u003c\/li\u003e\n  \u003cli\u003eSteel chassis with sealed rotary pots, backlit Mute and Solo buttons\u003c\/li\u003e\n  \u003cli\u003eWaveform OEM recording software and DAW Essentials plugin bundle included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eChannels: 16 (12 mono XLR\/TRS combo + 2 stereo line + 1\/8\" stereo input + Bluetooth)\u003c\/li\u003e\n  \u003cli\u003eUSB recording: 18 inputs x 4 outputs, 24-bit \/ 96 kHz\u003c\/li\u003e\n  \u003cli\u003eEIN (150 Ω source, 20 Hz–20 kHz): –128 dBu\u003c\/li\u003e\n  \u003cli\u003eTHD (Mic in to Main Out, +4 dBu): \u0026lt;0.01%\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 20 Hz – 30 kHz (+0 \/ –1 dB)\u003c\/li\u003e\n  \u003cli\u003eAdjacent channel separation at 1 kHz: –90 dB\u003c\/li\u003e\n  \u003cli\u003ePreamp gain range: up to 60 dB\u003c\/li\u003e\n  \u003cli\u003ePhantom power: +48 V on all XLR inputs\u003c\/li\u003e\n  \u003cli\u003eDimensions: 475 x 356 x 137 mm (18.7\" x 14.0\" x 5.4\")\u003c\/li\u003e\n  \u003cli\u003eWeight: 7.1 kg (15.6 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444578521420,"sku":"59265","price":643.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MackieOnyx161.jpg?v=1786979555"},{"product_id":"mackie-dlz-creator","title":"Mackie DLZ CREATOR","description":"\u003cdiv lang=\"en\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eMackie DLZ Creator\u003c\/strong\u003e – an adaptive digital \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003estudio mixer\u003c\/a\u003e for podcasting and streaming, featuring four Onyx80 preamps, a 10.1\" touchscreen, Mix Agent technology, multitrack SD recording and USB-C audio interface. 48 kHz \/ 24-bit, EIN –143.4 dBV.\u003c\/p\u003e\n\n\u003cp\u003eThe DLZ Creator addresses a specific problem: most digital mixers either oversimplify to the point of being limiting, or demand a steep learning curve. Mackie resolves this with three interface modes – Easy, Enhanced and Pro – switchable in real time on the 10.1\" touchscreen. The hardware and DSP remain identical across all three; only the layer of control changes to match the operator's experience level or the session at hand.\u003c\/p\u003e\n\n\u003ch3\u003eMix Agent, AutoMix and Mix Minus – smart automation without compromise\u003c\/h3\u003e\n\n\u003cp\u003eMix Agent walks through setup step by step, handling gain calibration and mic preset configuration without menu-diving. AutoMix manages levels across up to four microphones simultaneously, automatically attenuating inactive speakers – critical for panel discussions and multi-host podcasts where ducking speed and accuracy directly affect listener experience. Mix Minus eliminates call echo with a single tap: Bluetooth 5.0-connected phones are routed into the mix without the caller hearing their own voice reflected back. Each of the four headphone outputs (30 mW each) carries an independently configured monitor mix.\u003c\/p\u003e\n\n\u003ch3\u003eRecording, networking and DSP\u003c\/h3\u003e\n\n\u003cp\u003eMultitrack recording captures 12 channels plus the main mix at 24-bit\/48 kHz directly to microSD or USB flash drive. SD 3.0 transfer at 104 MB\/s eliminates dropout risk during long sessions. The Ethernet 10\/100 port enables NDI integration – the DLZ Creator connects directly to OBS or other streaming systems as an audio\/video source without routing through a USB host computer. System latency is approximately 3 ms. Per-channel DSP covers 3-band parametric EQ, noise gate, de-esser, compressor, Atomizer Reverb and Chronotronic Delay with adjustable parameters per channel.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4 Onyx80 mic preamps, EIN –143.4 dBV (A-weighted), system latency ~3 ms\u003c\/li\u003e\n  \u003cli\u003e10.1\" touchscreen with anti-glare coating\u003c\/li\u003e\n  \u003cli\u003e3 interface modes: Easy \/ Enhanced \/ Pro – switchable without restarting\u003c\/li\u003e\n  \u003cli\u003eMix Agent – virtual audio assistant for setup and gain calibration\u003c\/li\u003e\n  \u003cli\u003eAutoMix – automatic level management for up to 4 microphones\u003c\/li\u003e\n  \u003cli\u003eMix Minus – single-tap echo elimination for Bluetooth phone call-ins\u003c\/li\u003e\n  \u003cli\u003eMultitrack recording: 12 channels + main mix, 24-bit\/48 kHz, to SD or USB flash drive\u003c\/li\u003e\n  \u003cli\u003eUSB-C to computer (USB 2.0 HS, 480 Mb\/s) + Ethernet 10\/100 (NDI)\u003c\/li\u003e\n  \u003cli\u003eBluetooth 5.0 – smartphone as audio source or call-in guest\u003c\/li\u003e\n  \u003cli\u003e4 headphone outputs with independent monitor mixes (30 mW each)\u003c\/li\u003e\n  \u003cli\u003ePer-channel DSP: 3-band parametric EQ, gate, de-esser, compressor, Atomizer Reverb, Chronotronic Delay\u003c\/li\u003e\n  \u003cli\u003e6 sample pads with 4 banks (8 memory banks), censor\/duck\/fade controls\u003c\/li\u003e\n  \u003cli\u003eVoice FX: Robot, Disguise, Telephone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSample rate: 48 kHz \/ 24-bit\u003c\/li\u003e\n  \u003cli\u003eSystem latency: ~3 ms\u003c\/li\u003e\n  \u003cli\u003eEIN (A-weighted): –143.4 dBV\u003c\/li\u003e\n  \u003cli\u003eInputs: 4× combo XLR\/1\/4\" (balanced\/unbalanced), 1× 1\/4\" stereo jack, 1× 1\/8\" stereo jack\u003c\/li\u003e\n  \u003cli\u003eInput impedance: 4 kΩ (mic balanced), 10 kΩ (instrument balanced), 5 kΩ (instrument unbalanced)\u003c\/li\u003e\n  \u003cli\u003eOutputs: 1\/4\" main out (balanced\/unbalanced), 4× stereo headphone jack\u003c\/li\u003e\n  \u003cli\u003eLine output maximum level: 14 dBu\u003c\/li\u003e\n  \u003cli\u003eHeadphone output power: 30 mW\u003c\/li\u003e\n  \u003cli\u003eBluetooth: 5.0\u003c\/li\u003e\n  \u003cli\u003eUSB: 2.0 HS (480 Mb\/s), USB-C\u003c\/li\u003e\n  \u003cli\u003eSD recording: 12 channels + main mix, 24-bit\/48 kHz, SD 3.0 (104 MB\/s)\u003c\/li\u003e\n  \u003cli\u003eNetwork: Ethernet 10\/100 (NDI)\u003c\/li\u003e\n  \u003cli\u003ePower supply: 18 V \/ 1.5 A\u003c\/li\u003e\n  \u003cli\u003eDimensions: 330 × 381 × 103 mm (13.0\" × 15.0\" × 4.1\")\u003c\/li\u003e\n  \u003cli\u003eWeight: 2.8 kg (6.1 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444578980172,"sku":"59279","price":717.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MackieDLZCREATOR1.jpg?v=1786979561"},{"product_id":"mackie-dl32se","title":"Mackie DL32SE","description":"\u003cdiv lang=\"en\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eMackie DL32SE\u003c\/strong\u003e – a 32-channel digital rack \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003emixer\u003c\/a\u003e with 32 Onyx+ preamps, 10 fully assignable XLR outputs, a 32×32 USB audio interface and wireless control via the Master Fader SE app (iOS, Android, macOS, Windows). 48 kHz \/ 24-bit, 1.5 ms latency, THD+N \u0026lt;0.005%.\u003c\/p\u003e\n\n\u003cp\u003eThe DL32SE is a stagebox\/rack enclosure with an integrated carry handle and rubber corners – fits 4U of rack space or sits directly on stage while the engineer mixes from anywhere on the floor via a Wi-Fi router. Steel construction, internal power supply, no touchscreen or physical faders – all control and DSP is handled by the Master Fader SE app running on up to 20 devices simultaneously. The absence of a hardware control surface is a deliberate design decision that removes the fixed FOH position entirely.\u003c\/p\u003e\n\n\u003ch3\u003ePer-channel and per-output DSP – a complete system in a single box\u003c\/h3\u003e\n\n\u003cp\u003eEach of the 32 input channels carries a 4-band parametric EQ (Vintage and Modern modes), HPF, gate and compressor. Each of the 10 outputs adds a 31-band GEQ, LPF, alignment delay and RTA\/Spectrograph. Routing is fully flexible: 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, Main L\/R bus, 6 VCAs and 6 mute groups. Four stereo FX processors with dedicated sends and returns cover reverbs, delays, choruses and flangers without occupying input channels or physical outputs.\u003c\/p\u003e\n\n\u003ch3\u003eMultitrack recording and virtual soundcheck\u003c\/h3\u003e\n\n\u003cp\u003eThe 32×32 USB 2.0 interface records all input channels simultaneously to a DAW during the show, then plays them back the following day as a virtual soundcheck – without musicians present. A dedicated stereo return channel accepts intermission music or backing tracks directly from a DAW or playback device. EIN sits at –127 dBu (A-weighted), analog dynamic range exceeds 110 dB (A-weighted) and SNR at +4 dBu is above 92 dB unweighted – figures that hold up against purpose-built studio hardware.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e32 input channels: 16× XLR + 16× combo XLR\/TRS (inputs 31–32: Hi-Z 1 MΩ)\u003c\/li\u003e\n  \u003cli\u003e32 Onyx+ preamps, EIN –127 dBu (A-weighted), THD+N \u0026lt;0.005%\u003c\/li\u003e\n  \u003cli\u003e10 fully assignable XLR outputs + 1\/4\" headphone output\u003c\/li\u003e\n  \u003cli\u003ePer-input DSP: 4-band parametric EQ (Vintage\/Modern), HPF, gate, compressor, RTA\/Spectrograph\u003c\/li\u003e\n  \u003cli\u003ePer-output DSP: 4-band PEQ, HPF\/LPF, 31-band GEQ, comp\/limiter, alignment delay, RTA\/Spectrograph\u003c\/li\u003e\n  \u003cli\u003e8 stereo-linkable aux sends, 6 stereo-linkable subgroups, Main L\/R, 6 VCAs, 6 mute groups\u003c\/li\u003e\n  \u003cli\u003e4 stereo FX processors with dedicated sends and returns\u003c\/li\u003e\n  \u003cli\u003e32×32 USB 2.0 audio interface, 48 kHz \/ 24-bit\u003c\/li\u003e\n  \u003cli\u003eWireless control: Ethernet → external router → Master Fader SE, up to 20 devices (iOS\/Android\/macOS\/Windows)\u003c\/li\u003e\n  \u003cli\u003eAccess Limiting – restricts critical functions for performers controlling their own monitor mixes\u003c\/li\u003e\n  \u003cli\u003eOffline show creation before arriving at the venue\u003c\/li\u003e\n  \u003cli\u003eSteel stagebox\/rack enclosure (4U), integrated carry handle, rubber corners\u003c\/li\u003e\n  \u003cli\u003eWaveform OEM + DAW Essentials plugin bundle included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSample rate: 48 kHz \/ 24-bit\u003c\/li\u003e\n  \u003cli\u003eSystem latency (analog in → Main Bus → analog out): 1.5 ms\u003c\/li\u003e\n  \u003cli\u003eEIN (150 Ω source): –127 dBu (A-weighted)\u003c\/li\u003e\n  \u003cli\u003eTHD+N (XLR mic → XLR out, unity gain, 1 kHz): \u0026lt;0.005%\u003c\/li\u003e\n  \u003cli\u003eDynamic range (mic → Main Bus → XLR out, unity gain): \u0026gt;110 dB (A-weighted)\u003c\/li\u003e\n  \u003cli\u003eSNR (ref +4 dBu, unity gain): \u0026gt;92 dB (unweighted)\u003c\/li\u003e\n  \u003cli\u003eFrequency response (XLR): ±0, –1 dB, 20 Hz – 20 kHz\u003c\/li\u003e\n  \u003cli\u003eCrosstalk (adjacent XLR inputs, unity gain): \u0026lt;–105 dB @ 1 kHz\u003c\/li\u003e\n  \u003cli\u003eMax input level: XLR +22 dBu; 1\/4\" +30 dBu\u003c\/li\u003e\n  \u003cli\u003eInput impedance: XLR 3 kΩ balanced; 1\/4\" line 30 kΩ balanced; Hi-Z 1 MΩ unbalanced\u003c\/li\u003e\n  \u003cli\u003eMax output level: XLR +22 dBu; output impedance 300 Ω\u003c\/li\u003e\n  \u003cli\u003ePhantom power: 48 V DC, individual digital control per channel\u003c\/li\u003e\n  \u003cli\u003eUSB interface: 32×32, USB 2.0\u003c\/li\u003e\n  \u003cli\u003eNetwork connection: Ethernet (external router required, not included)\u003c\/li\u003e\n  \u003cli\u003eRack format: 4U\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 kg (8.8 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444579176780,"sku":"59271","price":1316.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MackieDL32SE.jpg?v=1786979564"},{"product_id":"presonus-studiolive-series-iii-se-32","title":"PreSonus StudioLive Series III SE 32","description":"\u003cdiv lang=\"en\"\u003e\n\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive Series III SE 32\u003c\/strong\u003e – a professional digital \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003emixing console\u003c\/a\u003e with a 40-channel mix engine, 32 XMAX-Remote preamps, 33 touch-sensitive motorized faders, a 64×64 USB audio interface, onboard 34×34 SD recording and Milan-certified AVB networking. 32-bit floating-point DSP, A\/D–D\/A converters with 115 dB dynamic range (A-weighted).\u003c\/p\u003e\n\n\u003cp\u003eThe StudioLive SE 32 is built for engineers who need a full-scale FOH console with simultaneous multitrack recording, remote control and scalable I\/O – without building a separate recording setup alongside the live rig. The one-to-one physical layout, with one fader per channel across 33 motorized faders, eliminates submenus during fast changeovers between sets. Every console setting – channel presets, routing, scenes – is fully recallable and stored in project files.\u003c\/p\u003e\n\n\u003ch3\u003eFat Channel DSP and FlexMix – routing without compromise\u003c\/h3\u003e\n\n\u003cp\u003eEvery input and output bus carries a full Fat Channel strip: HPF, gate, compressor, limiter, 4-band parametric EQ (input) and 6-band parametric EQ (bus) – with analogue-modelled processing options including Brit Comp, FC-670, Tube EQ and more. All 8 compressor models and all 7 EQs from the Fat Channel Collection are included standard in current firmware. The 16 FlexMixes are individually configurable per show as aux sends, subgroups or matrix mixes. Four dedicated subgroups, four FX buses with stereo returns and effect processors, and 24 DCA groups complete the routing architecture. The dual-core FLEX DSP engine runs all processors simultaneously with no shared resource limitations.\u003c\/p\u003e\n\n\u003ch3\u003eRecording, Milan AVB and remote control\u003c\/h3\u003e\n\n\u003cp\u003eThe onboard SD recorder captures 34 tracks (32 channels + stereo mix) directly to card without a computer – and plays back for a one-click virtual soundcheck via Capture software. The 64×64 USB 2.0 interface runs simultaneously for parallel DAW recording and playback (a perpetual Fender Studio Pro license is included). Milan-certified built-in AVB networking connects NSB stage boxes, EarMix 16M personal monitors and the AVB-D16 Dante bridge over a single Ethernet cable. Remote control options include Universal Control (tablet\/computer\/phone locally), PreSonus Metro (full remote control over the internet with real-time audio monitoring) and QMix-UC (individual monitor mix control for performers).\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e40 mix channels, 26 buses, 32 mic\/line inputs\u003c\/li\u003e\n  \u003cli\u003e32 XMAX-Remote fully recallable preamps, THD \u0026lt;0.005%, SNR \u0026gt;94 dB\u003c\/li\u003e\n  \u003cli\u003e33 touch-sensitive motorized faders – full automation and scene recall\u003c\/li\u003e\n  \u003cli\u003eFat Channel on every input and bus: HPF, gate, comp\/limiter, parametric EQ\u003c\/li\u003e\n  \u003cli\u003e8 compressor models + 7 EQs from Fat Channel Collection – included standard\u003c\/li\u003e\n  \u003cli\u003e16 FlexMixes (aux\/subgroup\/matrix) + 4 subgroups + 4 FX buses + 24 DCAs\u003c\/li\u003e\n  \u003cli\u003eSD recorder: 34 tracks (32+2), standalone; one-click virtual soundcheck via Capture\u003c\/li\u003e\n  \u003cli\u003e64×64 USB 2.0 audio interface, fully bidirectional\u003c\/li\u003e\n  \u003cli\u003eMilan-certified AVB: NSB stage boxes, EarMix 16M, AVB-D16 (Dante) – single Ethernet cable\u003c\/li\u003e\n  \u003cli\u003eMetro – remote control and real-time audio monitoring over the internet\u003c\/li\u003e\n  \u003cli\u003eUniversal Control + QMix-UC – local and remote control from tablets and phones\u003c\/li\u003e\n  \u003cli\u003eBluetooth audio input for intermission music or quick reference\u003c\/li\u003e\n  \u003cli\u003eIncluded software: Capture, Fender Studio Pro (perpetual license), Universal Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eChannels: 40 (32 mono mic\/line + stereo tape in + 2× stereo aux in)\u003c\/li\u003e\n  \u003cli\u003eAnalog inputs: 32× XLR mic\/line (XMAX-Remote), talkback XLR input\u003c\/li\u003e\n  \u003cli\u003eAnalog outputs: Main L\/R XLR, Mono sum XLR, 16 mix outputs, 2× monitor output, 2× headphone 1\/4\"\u003c\/li\u003e\n  \u003cli\u003eBuses: 16 FlexMix + 4 subgroups + 4 FX + Main L\/R + Mono + Solo = 26 total\u003c\/li\u003e\n  \u003cli\u003eDSP: dual-core FLEX DSP Engine, 32-bit floating-point\u003c\/li\u003e\n  \u003cli\u003eA\/D–D\/A dynamic range: 115 dB (A-weighted, 48 kHz)\u003c\/li\u003e\n  \u003cli\u003eTHD (mic → Main Out, unity gain): \u0026lt;0.005%\u003c\/li\u003e\n  \u003cli\u003eSNR (ref +4 dBu, 20 kHz BW, unity gain, A-weighted): \u0026gt;94 dB\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 20 Hz – 20 kHz, ±0.5 dB\u003c\/li\u003e\n  \u003cli\u003ePhantom power: 48 V, per channel\u003c\/li\u003e\n  \u003cli\u003eUSB: 2.0, 64×64 bidirectional\u003c\/li\u003e\n  \u003cli\u003eSD recording: 34 tracks, SDHC\/SDXC Class 10\u003c\/li\u003e\n  \u003cli\u003eNetwork: AVB (Milan certified), Ethernet\u003c\/li\u003e\n  \u003cli\u003eBluetooth: audio input\u003c\/li\u003e\n  \u003cli\u003eDimensions: 822 × 583 × 165 mm (32.4\" × 23.0\" × 6.5\")\u003c\/li\u003e\n  \u003cli\u003eWeight: 16.9 kg (37.2 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444579373388,"sku":"59255","price":3349.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLiveSeriesIIISE321.jpg?v=1786979567"},{"product_id":"presonus-studiolive-24r-rack-mixer","title":"PreSonus StudioLive 24R","description":"\u003cdiv lang=\"en\"\u003e\n\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 24R\u003c\/strong\u003e – a 40-channel digital \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003erack mixer\u003c\/a\u003e from the Series III family, featuring 24 Class-A XMAX preamps, 40×40 USB and 55×55 AVB audio interfaces, onboard stereo SD recording, 16 FlexMixes and wireless control via UC Surface. 2U rack format, 4.9 kg. Four tools in one enclosure: standalone rack mixer, AVB stage box, monitor mixing hub and audio interface.\u003c\/p\u003e\n\n\u003cp\u003eThe StudioLive 24R is built for engineers who need a centralized input node close to the stage – without running analog snakes across the venue floor. A single CAT5e\/CAT6 Ethernet cable to a Series III console replaces the multi-conductor copper snake, eliminating both signal degradation over long runs and the weight and cost of analog infrastructure. Operating modes switch in software with no physical recabling required.\u003c\/p\u003e\n\n\u003ch3\u003eFour operating modes in one unit\u003c\/h3\u003e\n\n\u003cp\u003eIn standalone mixer mode, the 24R functions as a full 40-channel digital mixer controlled wirelessly via UC Surface on any tablet, computer or phone. In stage box mode paired with a Series III console, it handles remote inputs and outputs while the FOH engineer controls preamps and phantom power directly from the console's Fat Channel. In stage box + monitor mixer mode, the unit simultaneously processes stage inputs and delivers up to 16 independent monitor mixes – each with full Fat Channel processing per channel and bus. With up to 16 EarMix 16M personal monitor mixers connected over AVB, performers manage their own in-ear mixes independently, without involving the FOH engineer.\u003c\/p\u003e\n\n\u003ch3\u003eDSP, routing and recording\u003c\/h3\u003e\n\n\u003cp\u003eThe dual-core FLEX DSP engine runs 40 mix channels, 22 buses and 270 simultaneous processors. Fat Channel on every input and bus provides State Space Modeled EQ and compressor options, gate, limiter and HPF. The 16 FlexMixes configure individually per show as aux sends, subgroups or matrix mixes; four dedicated subgroups, four FX buses and 24 DCA groups complete the routing architecture. The 40×40 USB 2.0 interface records all channels to a DAW; the 55×55 AVB interface handles network-based recording over Ethernet. Simultaneously, the onboard SD recorder captures a stereo mix to card without a computer. PreSonus Metro enables full remote control over the internet with real-time audio monitoring from anywhere in the world.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e40 mix channels, 22 buses, 270 simultaneous processors (dual-core FLEX DSP)\u003c\/li\u003e\n  \u003cli\u003e24 combo XLR\/TRS inputs with Class-A XMAX preamps (fully recallable) + 2× stereo RCA inputs\u003c\/li\u003e\n  \u003cli\u003eFat Channel on every channel and bus: HPF, gate, compressor, limiter, parametric EQ (State Space Modeled)\u003c\/li\u003e\n  \u003cli\u003e16 FlexMixes (aux\/subgroup\/matrix) + 4 subgroups + 4 FX buses + 24 DCAs\u003c\/li\u003e\n  \u003cli\u003e6-band fully parametric EQ on all mix outputs\u003c\/li\u003e\n  \u003cli\u003eUSB 2.0 audio interface: 40×40 bidirectional to DAW\u003c\/li\u003e\n  \u003cli\u003eAVB audio interface: 55×55 over Ethernet\u003c\/li\u003e\n  \u003cli\u003eOnboard stereo SD recording (no computer required)\u003c\/li\u003e\n  \u003cli\u003eOutputs: 12× 1\/4\" TRS FlexMix + 2× XLR Main (L\/R) + headphone out\u003c\/li\u003e\n  \u003cli\u003ePhantom power: 48 V, individual digital control per channel\u003c\/li\u003e\n  \u003cli\u003e3 operating modes: standalone mixer \/ stage box \/ stage box + monitor mixer\u003c\/li\u003e\n  \u003cli\u003eCompatible with up to 16 EarMix 16M personal monitors over AVB\u003c\/li\u003e\n  \u003cli\u003eMetro – remote control over the internet with real-time audio monitoring\u003c\/li\u003e\n  \u003cli\u003eUC Surface + QMix-UC – wireless control from tablets, computers and phones\u003c\/li\u003e\n  \u003cli\u003eRack format: 2U\u003c\/li\u003e\n  \u003cli\u003eIncluded software: Studio One Pro (perpetual license), Capture, UC Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMix channels: 40 (24 local mic\/line + FX returns + digital inputs)\u003c\/li\u003e\n  \u003cli\u003eAnalog inputs: 24× combo XLR\/1\/4\" (Class-A XMAX, recallable), 2× stereo RCA\u003c\/li\u003e\n  \u003cli\u003eAnalog outputs: 2× XLR Main L\/R, 12× 1\/4\" TRS FlexMix, headphone output\u003c\/li\u003e\n  \u003cli\u003eBuses: 16 FlexMix + 4 subgroups + 4 FX + Main L\/R + Solo = 22 total\u003c\/li\u003e\n  \u003cli\u003eDSP: dual-core FLEX DSP Engine, 270 simultaneous processors\u003c\/li\u003e\n  \u003cli\u003eTHD (mic → Main Out, unity gain): \u0026lt;0.005%\u003c\/li\u003e\n  \u003cli\u003eSNR (ref +4 dBu, A-weighted): \u0026gt;94 dB\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 20 Hz – 20 kHz, ±0.5 dB\u003c\/li\u003e\n  \u003cli\u003eA\/D–D\/A dynamic range: 115 dB (A-weighted, 48 kHz)\u003c\/li\u003e\n  \u003cli\u003ePhantom power: 48 V, per channel\u003c\/li\u003e\n  \u003cli\u003eUSB: 2.0, 40×40 bidirectional\u003c\/li\u003e\n  \u003cli\u003eAVB: 55×55, Ethernet\u003c\/li\u003e\n  \u003cli\u003eSD recording: stereo, SDHC Class 10\u003c\/li\u003e\n  \u003cli\u003eRack format: 2U\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.9 kg (10.8 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444579504460,"sku":"59252","price":1408.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLive24R-RackMixer1.jpg?v=1786979570"},{"product_id":"presonus-studiolive-mixer-ar8c-usb","title":"PreSonus StudioLive Mixer AR8c USB","description":"\u003cdiv lang=\"en\"\u003e\n\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive AR8c USB\u003c\/strong\u003e – a hybrid analog \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003emixer and recording interface\u003c\/a\u003e with 4 Class-A XMAX preamps, a USB-C 8×4 audio interface (24-bit\/96 kHz), built-in stereo SD recorder, 16-preset effects processor and Bluetooth 5.0. Three devices in one enclosure: analog mixer, audio interface and standalone recorder.\u003c\/p\u003e\n\n\u003cp\u003eThe AR8c is designed for musicians and content creators who need a single compact unit for live mixing, podcast recording, studio sessions and band rehearsals – without building out a rack of separate devices. The analog signal path with XMAX preamps, three-band EQ and full-complement outputs serves performers, while the USB-C interface and SD recorder add a recording layer without requiring a DAW to be running.\u003c\/p\u003e\n\n\u003ch3\u003eSuper Channel and multi-source stereo input\u003c\/h3\u003e\n\n\u003cp\u003eChannel 7\/8 (Super Channel) is the hub for integrating analog and digital stereo sources simultaneously: RCA inputs, 1\/8\" stereo jack, Bluetooth 5.0 streaming and SD\/USB playback all feed into one stereo channel that can be mixed alongside the mic inputs. This is practical for DJs, solo performers and podcasters who need to mix backing tracks and break music without tying up microphone channels. Channels 1 and 2 include Hi-Z instrument inputs for direct guitar and bass connection without a DI box. Channels 1 and 2 also carry a switchable high-pass filter.\u003c\/p\u003e\n\n\u003ch3\u003eRecording with and without a computer\u003c\/h3\u003e\n\n\u003cp\u003eThe USB 2.0 interface (USB-C connector) streams 8 input channels plus the main mix to a DAW at 24-bit\/96 kHz, and accepts 4 return streams (two stereo pairs) for playback through mixer channels. The onboard SD recorder writes the stereo main mix directly to an SD or SDHC card up to 32 GB – no computer needed, ready for playback at the next show or rehearsal. The built-in effects processor provides 16 presets (reverb, delay, chorus) with a dedicated send\/return bus and a bypass footswitch jack.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 mono channels (Ch. 1–2) with Class-A XMAX preamps, Hi-Z instrument inputs, HP filter\u003c\/li\u003e\n  \u003cli\u003e2 stereo channels (Ch. 3\/4 and 5\/6) with XMAX preamps and +10 dB input boost\u003c\/li\u003e\n  \u003cli\u003eSuper Channel 7\/8: RCA + 1\/8\" AUX + Bluetooth 5.0 + SD\/USB playback\u003c\/li\u003e\n  \u003cli\u003e3-band semi-parametric EQ on every channel\u003c\/li\u003e\n  \u003cli\u003eUSB-C audio interface: 8×4, 24-bit\/96 kHz (USB 2.0)\u003c\/li\u003e\n  \u003cli\u003eStereo SD recorder (2×2), SD\/SDHC up to 32 GB\u003c\/li\u003e\n  \u003cli\u003eEffects processor: 16 presets (reverb, delay, chorus), send\/return bus, bypass footswitch jack\u003c\/li\u003e\n  \u003cli\u003eOutputs: Main L\/R XLR, Control Room TRS, AUX monitor TRS, headphone TRS\u003c\/li\u003e\n  \u003cli\u003eEIN \u0026lt;–128 dBu (mono channels, A-weighted), THD+N \u0026lt;0.01%\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 20 Hz – 20 kHz (+0.5\/–1.5 dB)\u003c\/li\u003e\n  \u003cli\u003eSNR: \u0026gt;94 dB (ref +4 dBu)\u003c\/li\u003e\n  \u003cli\u003eBluetooth 5.0 – wireless streaming to Super Channel\u003c\/li\u003e\n  \u003cli\u003eIncluded software: Capture, Fender Studio Pro (perpetual license), Ableton Live Lite\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eChannels: 2× mono mic\/line\/Hi-Z + 2× stereo mic\/line + Super Channel (RCA\/1\/8\"\/BT\/SD)\u003c\/li\u003e\n  \u003cli\u003ePreamps: 4× Class-A XMAX (channels 1–4)\u003c\/li\u003e\n  \u003cli\u003eGain range: mono 50 dB (0 to +50 dB), stereo 40 dB (+5 to +45 dB)\u003c\/li\u003e\n  \u003cli\u003eMax input level (unity gain): mono +18 dBu (±1 dB), stereo –5 dBu (±1 dB)\u003c\/li\u003e\n  \u003cli\u003eEIN (mono channels, 150 Ω, A-weighted): \u0026lt;–128 dBu\u003c\/li\u003e\n  \u003cli\u003eTHD+N (min. gain, A-weighted): \u0026lt;0.01%\u003c\/li\u003e\n  \u003cli\u003eSNR (ref +4 dBu): \u0026gt;94 dB\u003c\/li\u003e\n  \u003cli\u003eFrequency response (analog and USB): 20 Hz – 20 kHz (+0.5\/–1.5 dB)\u003c\/li\u003e\n  \u003cli\u003eUSB interface: 8×4, 24-bit\/96 kHz, USB 2.0 (USB-C connector)\u003c\/li\u003e\n  \u003cli\u003eSD recording: 2×2 stereo, SD\/SDHC up to 32 GB\u003c\/li\u003e\n  \u003cli\u003eOutputs: Main L\/R XLR, Control Room TRS, AUX monitor TRS, headphone TRS\u003c\/li\u003e\n  \u003cli\u003eEffects: 16 presets (reverb\/delay\/chorus), bypass footswitch jack\u003c\/li\u003e\n  \u003cli\u003eBluetooth: 5.0\u003c\/li\u003e\n  \u003cli\u003ePhantom power: 48 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444580192588,"sku":"59254","price":435.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLiveMixerAR8cUSB1.jpg?v=1786979577"},{"product_id":"presonus-earmix-16m","title":"PreSonus EarMix 16M","description":"\u003cdiv lang=\"en\"\u003e\n\n\u003cp\u003e\u003cstrong\u003ePreSonus EarMix 16M\u003c\/strong\u003e – a 16-channel AVB-networked personal \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003emonitor mixer\u003c\/a\u003e with a 150 mW\/channel headphone amplifier (at 60 Ω), stereo balanced TRS line outputs, 3-band EQ and limiter on every channel and the main mix, and Power over Ethernet (PoE) support. 24-bit\/48 kHz, 115 dB dynamic range (A-weighted). Milan-certified AVB.\u003c\/p\u003e\n\n\u003cp\u003eThe EarMix 16M addresses a specific stage problem: musicians want personalized control over their own monitor mix without involving the FOH engineer at every adjustment. A single CAT5e\/CAT6 Ethernet cable delivers 16 channels of audio and PoE power directly to the unit placed at the performer's feet or mounted on a microphone stand. Each musician independently controls levels, EQ, stereo linking and channel groups, while the FOH engineer retains full control over the main mix.\u003c\/p\u003e\n\n\u003ch3\u003ePer-channel EQ and limiter on every input\u003c\/h3\u003e\n\n\u003cp\u003eAll 16 input channels carry a 3-band EQ with parametric mid and an individual limiter – the same processing is available on the main bus. A musician can build a mix precisely tailored to their needs: boost the bass of their own instrument, pull back an obtrusive drum, reshape the vocal EQ. The finished mix saves to one of 16 local scene memory slots – recall at the next show takes a few seconds. Channels 1 and 2 can be stereo-linked as a pair directly from the panel surface without going into software.\u003c\/p\u003e\n\n\u003ch3\u003ePoE, network topology and scalability\u003c\/h3\u003e\n\n\u003cp\u003eThe EarMix 16M is powered either from the included 24 V DC external supply or via Power over Ethernet from a compatible switch – including the dedicated PreSonus SW5E. With PoE, a single Ethernet cable is sufficient to place the unit anywhere on stage without access to a mains outlet. Two RJ45 AVB ports support daisy-chaining multiple units or connection to an SW5E switch. Up to 24 EarMix 16M units can connect simultaneously to a single StudioLive Series III system. The onboard analog AUX input accepts a metronome or any external reference signal outside the AVB network.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e16 mono input channels via AVB network (Milan certified)\u003c\/li\u003e\n  \u003cli\u003e3-band EQ (parametric mid) and limiter on every channel and the main mix\u003c\/li\u003e\n  \u003cli\u003e16 local scene memory slots with onboard save and recall\u003c\/li\u003e\n  \u003cli\u003eStereo link, channel grouping and pan – directly from the panel surface\u003c\/li\u003e\n  \u003cli\u003eHeadphone amplifier: 150 mW\/channel at 60 Ω, THD+N 0.01%\u003c\/li\u003e\n  \u003cli\u003eHeadphone frequency response: 20 Hz – 20 kHz (±0.05 dB)\u003c\/li\u003e\n  \u003cli\u003eLine outputs: 2× 1\/4\" TRS balanced, max +18 dBu, output impedance 100 Ω\u003c\/li\u003e\n  \u003cli\u003eAnalog AUX input (metronome, external reference source)\u003c\/li\u003e\n  \u003cli\u003eDigital dynamic range: 115 dB (A-weighted, 48 kHz)\u003c\/li\u003e\n  \u003cli\u003ePower over Ethernet (PoE) – single RJ45 cable for audio and power\u003c\/li\u003e\n  \u003cli\u003e2× RJ45 AVB ports – daisy-chain and SW5E switch connection\u003c\/li\u003e\n  \u003cli\u003eUp to 24 EarMix 16M units per StudioLive Series III network\u003c\/li\u003e\n  \u003cli\u003eOptional microphone stand mount\u003c\/li\u003e\n  \u003cli\u003ePower: 24 V DC or PoE\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNetwork inputs: 16 mono channels via AVB (Milan certified, RJ45)\u003c\/li\u003e\n  \u003cli\u003eAUX input: analog (external source)\u003c\/li\u003e\n  \u003cli\u003eHeadphone output: 1\/4\" TRS, 150 mW\/channel at 60 Ω\u003c\/li\u003e\n  \u003cli\u003eHeadphone frequency response: 20 Hz – 20 kHz (±0.05 dB)\u003c\/li\u003e\n  \u003cli\u003eTHD+N (HP, 1 kHz, max gain): 0.01%\u003c\/li\u003e\n  \u003cli\u003eLine outputs: 2× 1\/4\" TRS balanced, max +18 dBu (±0.5 dBu), output impedance 100 Ω\u003c\/li\u003e\n  \u003cli\u003eDigital dynamic range: 115 dB (A-weighted, 48 kHz)\u003c\/li\u003e\n  \u003cli\u003eSample rate: 48 kHz (44.1 kHz optional)\u003c\/li\u003e\n  \u003cli\u003eAVB network: 2× RJ45, daisy-chain, up to 24 units per StudioLive Series III system\u003c\/li\u003e\n  \u003cli\u003ePower: 24 V DC (supply included) or PoE\u003c\/li\u003e\n  \u003cli\u003eDimensions (W × D × H): 238 × 193 × 46 mm (9.4\" × 7.6\" × 1.8\")\u003c\/li\u003e\n  \u003cli\u003eWeight: 500 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444580356428,"sku":"59257","price":364.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusEarMix16M1.jpg?v=1786979580"},{"product_id":"mackie-3204-vlz-4","title":"MACKIE 3204 VLZ 4","description":"\u003cdiv lang=\"en\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eMackie 3204VLZ4\u003c\/strong\u003e is a 32-channel analog 4-bus mixer from the \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003estudio and recording equipment\u003c\/a\u003e category, equipped with 28 Onyx microphone preamplifiers offering a 60 dB gain range and an equivalent input noise of -128.5 dBu. Two 32-bit RMFX+ effect processors with 24 live-ready algorithms, a 24-bit 4x2 USB interface and eight single-knob compressors — four on key input channels and four on subgroups — make the 3204VLZ4 the first mixer in the VLZ history that genuinely eliminates the need for an outboard effects rack and a separate dynamics processor on the road.\u003c\/p\u003e\n\n  \u003ch3\u003eOnyx preamp — 128.5 dB dynamic range, distortion below 0.0007%\u003c\/h3\u003e\n\n  \u003cp\u003eThe Onyx preamp is a fully balanced discrete amplifier with a single continuous gain control spanning 0 to 60 dB — no switched gain ranges, no character shift at different settings. The 128.5 dB dynamic range and THD below 0.0007% across 20 Hz to 50 kHz are figures that hold up against dedicated outboard preamps. Each of the 28 mono channels carries a 3-band EQ with sweepable mid (100 Hz to 8 kHz, ±15 dB) and an 18 dB\/octave low-cut filter at 100 Hz. The four stereo channels have a 4-band fixed-frequency EQ. Six aux sends with pre\/post fader switching and dedicated inserts cover stage monitoring, effect returns and parallel outboard processing without compromising the main signal path.\u003c\/p\u003e\n\n  \u003ch3\u003eRMFX+, 4x2 USB and compressors on every subgroup\u003c\/h3\u003e\n\n  \u003cp\u003eBoth RMFX+ processors run simultaneously and independently — each delivering 24 effects including reverbs, choruses and tap delay accessible from the front panel without navigating menus. The processed signal routes directly to the main mix or to the stereo channels, where it passes through EQ, aux sends and a 60 mm fader for precise level control. The 4x2 USB interface at 24-bit\/44.1 or 48 kHz lets you stream up to four signals simultaneously to a DAW — subgroups 1-4 or the master L\/R — and return a stereo mix from the computer to a mixer channel or directly to the mains for playback. Sealed rotary controls keep dust, grime and spills out of the potentiometers during live operation. A powder-coated steel chassis closes the picture of the durability that has defined the VLZ line throughout its history.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e32 channels, 4-bus architecture (4 subgroups + L\/R main bus)\u003c\/li\u003e\n    \u003cli\u003e28 Onyx mic preamps — 60 dB gain range, EIN -128.5 dBu, THD \u0026lt; 0.0007%\u003c\/li\u003e\n    \u003cli\u003e28 high-headroom line inputs — maximum +22 dBu\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 128.5 dB\u003c\/li\u003e\n    \u003cli\u003eMono EQ (channels 1-28): 3-band with sweepable mid 100 Hz – 8 kHz, ±15 dB + 18 dB\/oct low-cut @ 100 Hz\u003c\/li\u003e\n    \u003cli\u003eStereo EQ (channels 29-32): 4-band with fixed frequencies\u003c\/li\u003e\n    \u003cli\u003eSingle-knob compressors: 4 x on key mono inputs (ch. 25-28) + 4 x on subgroups\u003c\/li\u003e\n    \u003cli\u003e6 aux sends with pre\/post fader switching and inserts\u003c\/li\u003e\n    \u003cli\u003e2 stereo returns, 4 group outputs with inserts\u003c\/li\u003e\n    \u003cli\u003eDual 32-bit RMFX+ processors — 24 effects each (reverbs, choruses, tap delay)\u003c\/li\u003e\n    \u003cli\u003e24-bit 4x2 USB interface (44.1\/48 kHz) — 4-channel DAW streaming, stereo return\u003c\/li\u003e\n    \u003cli\u003e+48 V phantom power\u003c\/li\u003e\n    \u003cli\u003ePFL\/AFL solo modes\u003c\/li\u003e\n    \u003cli\u003e60 mm log-taper faders\u003c\/li\u003e\n    \u003cli\u003e12-segment stereo meters\u003c\/li\u003e\n    \u003cli\u003eSealed rotary controls\u003c\/li\u003e\n    \u003cli\u003ePowder-coated steel chassis, universal power supply\u003c\/li\u003e\n    \u003cli\u003eWeight: 17.7 kg\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eChannels: 32 (28 mono + 4 stereo)\u003c\/li\u003e\n    \u003cli\u003eArchitecture: 4-bus (4 subgroups + L\/R main bus)\u003c\/li\u003e\n    \u003cli\u003eMain mix noise (fader unity, channels down): -84.5 dBu (S\/N 88.5 dB ref +4 dBu)\u003c\/li\u003e\n    \u003cli\u003eMain mix noise (fader unity, channels unity): -80.0 dBu\u003c\/li\u003e\n    \u003cli\u003eTHD (1 kHz @ 15 dB gain): mic in → insert send \u0026lt; 0.001% \/ mic in → main out \u0026lt; 0.005%\u003c\/li\u003e\n    \u003cli\u003eEIN (mic input → insert send, max gain, 150 Ω): -128.5 dBu (20 Hz – 20 kHz)\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 128.5 dB\u003c\/li\u003e\n    \u003cli\u003eCMRR: \u0026gt; 70 dB @ 1 kHz\u003c\/li\u003e\n    \u003cli\u003eFrequency response: +0\/-1 dB, 20 Hz – 50 kHz\u003c\/li\u003e\n    \u003cli\u003eAttenuation\/crosstalk (1 kHz): channel mute -90 dBu \/ channel fader down -88 dBu\u003c\/li\u003e\n    \u003cli\u003eMaximum input levels: mic in +21 dBu \/ all other inputs +21 dBu\u003c\/li\u003e\n    \u003cli\u003eMaximum output levels: main XLR out +27 dBu \/ all other outputs +21 dBu\u003c\/li\u003e\n    \u003cli\u003eMic input impedance: 2.7 kΩ\u003c\/li\u003e\n    \u003cli\u003eOther input impedances: 10 kΩ or greater\u003c\/li\u003e\n    \u003cli\u003eOutput impedances: 120 Ω (tape out \u0026lt; 10 Ω)\u003c\/li\u003e\n    \u003cli\u003eMono EQ (3-band): High shelf ±15 dB @ 12 kHz \/ Mid peak ±15 dB sweep 100 Hz – 8 kHz \/ Low shelf ±15 dB @ 80 Hz\u003c\/li\u003e\n    \u003cli\u003eStereo EQ (4-band): High shelf ±15 dB @ 12 kHz \/ Hi-Mid peak ±15 dB @ 2.5 kHz \/ Lo-Mid peak ±15 dB @ 400 Hz \/ Low shelf ±15 dB @ 80 Hz\u003c\/li\u003e\n    \u003cli\u003eLow-cut filter: 18 dB\/oct, -3 dB @ 100 Hz (mono channels)\u003c\/li\u003e\n    \u003cli\u003eUSB: format 1.1, 4-channel output + stereo input, 24-bit, 44.1\/48 kHz\u003c\/li\u003e\n    \u003cli\u003ePower consumption: 65 W\u003c\/li\u003e\n    \u003cli\u003ePower supply: 100–120 V AC \/ 200–240 V AC, 50–60 Hz (universal)\u003c\/li\u003e\n    \u003cli\u003eOperating temperature: 0°C – 40°C\u003c\/li\u003e\n    \u003cli\u003eDimensions: 96.4 cm (W) x 48.6 cm (D) x 15.3 cm (H)\u003c\/li\u003e\n    \u003cli\u003eWeight: 17.7 kg (39.0 lbs)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444585337164,"sku":"1247","price":1435.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MACKIE3204VLZ41.jpg?v=1786979601"},{"product_id":"mackie-1642-vlz-4","title":"MACKIE 1642 VLZ 4","description":"\u003cdiv lang=\"en\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eMackie 1642VLZ4\u003c\/strong\u003e is a 16-channel compact analog 4-bus mixer from the \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003estudio and recording equipment\u003c\/a\u003e category, equipped with 10 Onyx microphone preamplifiers offering a 60 dB gain range, -128.5 dBu equivalent input noise and distortion below 0.0007%. The compact format with optional rack-mount kit, powder-coated steel chassis and sealed rotary controls place it at the same reliability level as the larger VLZ4 models — at just 8.3 kg and a footprint small enough for a desk or field bag.\u003c\/p\u003e\n\n  \u003ch3\u003eTwo EQ types on one console — sweepable mid on mono channels\u003c\/h3\u003e\n\n  \u003cp\u003eChannels 1-8 (mono) carry a 3-band EQ with a fully sweepable midrange from 100 Hz to 8 kHz at ±15 dB, allowing precise targeting of any frequency region without collateral correction in adjacent bands. Channels 9-16 (stereo) use a fixed 4-band EQ at 80 Hz, 400 Hz, 2.5 kHz and 12 kHz — optimised for fast, predictable correction of stereo sources. An 18 dB\/octave low-cut filter at 75 Hz is available on all channels, effectively removing mechanical rumble and low-frequency environmental noise before summing. Four aux sends per channel support independent monitor mixes and effect loop configurations without competing with the main bus signal path.\u003c\/p\u003e\n\n  \u003ch3\u003eControl room section, ALT 3\/4 bus and eight direct outputs\u003c\/h3\u003e\n\n  \u003cp\u003eThe dedicated control room section with a source matrix (main mix or tape in) and independent level control enables monitoring of different signals without disturbing the main bus — useful when checking a recording return alongside the live feed. The ALT 3\/4 stereo bus provides additional routing flexibility: subgroups can be directed independently from the L\/R bus, enabling parallel submixing or additional zone feeds. Channels 1-8 each carry a direct output for multitrack recording without patching. Four stereo returns accommodate effect processors or additional stereo sources. The mixer's multi-voltage power supply covers worldwide mains without an external adaptor.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e16 channels, 4-bus architecture (4 subgroups + L\/R main bus + ALT 3\/4)\u003c\/li\u003e\n    \u003cli\u003e10 Onyx mic preamps — 60 dB gain range, EIN -128.5 dBu, THD \u0026lt; 0.0007%\u003c\/li\u003e\n    \u003cli\u003e16 high-headroom line inputs — maximum +22 dBu\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 128.5 dB\u003c\/li\u003e\n    \u003cli\u003eMono EQ (channels 1-8): 3-band with sweepable mid 100 Hz – 8 kHz, ±15 dB + 18 dB\/oct low-cut @ 75 Hz\u003c\/li\u003e\n    \u003cli\u003eStereo EQ (channels 9-16): 4-band fixed frequency + 18 dB\/oct low-cut @ 75 Hz\u003c\/li\u003e\n    \u003cli\u003e4 aux sends per channel (pre\/post fader)\u003c\/li\u003e\n    \u003cli\u003e4 stereo returns\u003c\/li\u003e\n    \u003cli\u003eDirect outputs on channels 1-8\u003c\/li\u003e\n    \u003cli\u003eALT 3\/4 stereo bus for additional routing flexibility\u003c\/li\u003e\n    \u003cli\u003eDedicated control room section with source matrix\u003c\/li\u003e\n    \u003cli\u003e+48 V phantom power (global switch)\u003c\/li\u003e\n    \u003cli\u003ePFL solo\u003c\/li\u003e\n    \u003cli\u003e60 mm log-taper faders\u003c\/li\u003e\n    \u003cli\u003e12-segment stereo meters\u003c\/li\u003e\n    \u003cli\u003eSealed rotary controls\u003c\/li\u003e\n    \u003cli\u003ePowder-coated steel chassis, optional rack-mount kit\u003c\/li\u003e\n    \u003cli\u003eMulti-voltage universal power supply\u003c\/li\u003e\n    \u003cli\u003eWeight: 8.3 kg\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eChannels: 16 (8 mono + 4 stereo pairs)\u003c\/li\u003e\n    \u003cli\u003eArchitecture: 4-bus (4 subgroups + L\/R main bus + ALT 3\/4)\u003c\/li\u003e\n    \u003cli\u003eMain mix noise (fader unity, channels down): -86.5 dBu (S\/N 90 dB ref +4 dBu)\u003c\/li\u003e\n    \u003cli\u003eMain mix noise (fader unity, channels unity): -86.0 dBu\u003c\/li\u003e\n    \u003cli\u003eTHD (1 kHz @ 35 dB gain): mic in → insert send \u0026lt; 0.0007%\u003c\/li\u003e\n    \u003cli\u003eEIN (mic input → insert send, max gain, 150 Ω): -128.5 dBu (20 Hz – 20 kHz)\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 128.5 dB\u003c\/li\u003e\n    \u003cli\u003eCMRR: \u0026gt; 70 dB @ 1 kHz\u003c\/li\u003e\n    \u003cli\u003eFrequency response: +0\/-1 dB, 20 Hz – 50 kHz\u003c\/li\u003e\n    \u003cli\u003eAttenuation\/crosstalk (1 kHz): mute -82 dBu \/ gain down -82 dBu\u003c\/li\u003e\n    \u003cli\u003eMaximum input levels: mic in +22 dBu \/ all other inputs +22 dBu\u003c\/li\u003e\n    \u003cli\u003eMaximum output levels: main TRS and XLR out +28 dBu \/ all other outputs +22 dBu\u003c\/li\u003e\n    \u003cli\u003eMic input impedance: 2.5 kΩ\u003c\/li\u003e\n    \u003cli\u003eOther input impedances: 10 kΩ or greater\u003c\/li\u003e\n    \u003cli\u003eOutput impedances: 120 Ω (tape out 1.1 kΩ)\u003c\/li\u003e\n    \u003cli\u003eMono EQ (3-band, ch. 1-8): High shelf ±15 dB @ 12 kHz \/ Mid peak ±15 dB sweep 100 Hz – 8 kHz \/ Low shelf ±15 dB @ 80 Hz \/ low-cut 18 dB\/oct @ 75 Hz\u003c\/li\u003e\n    \u003cli\u003eStereo EQ (4-band, ch. 9-16): High shelf ±15 dB @ 12 kHz \/ Hi-Mid peak ±15 dB @ 2.5 kHz \/ Lo-Mid peak ±15 dB @ 400 Hz \/ Low shelf ±15 dB @ 80 Hz \/ low-cut 18 dB\/oct @ 75 Hz\u003c\/li\u003e\n    \u003cli\u003ePower consumption: 50 W\u003c\/li\u003e\n    \u003cli\u003ePower supply: 100–120 V AC \/ 200–240 V AC, 50–60 Hz (multi-voltage)\u003c\/li\u003e\n    \u003cli\u003eOperating temperature: 0°C – 40°C\u003c\/li\u003e\n    \u003cli\u003eDimensions: 42.5 cm (W) x 48.3 cm (D) x 13.1 cm (H)\u003c\/li\u003e\n    \u003cli\u003eWeight: 8.3 kg (18.2 lbs)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444585501004,"sku":"1246","price":3099.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MACKIE1642VLZ41.jpg?v=1786979602"},{"product_id":"mackie-1604-vlz-4","title":"MACKIE  1604 VLZ 4","description":"\u003cdiv lang=\"en\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eMackie 1604VLZ4\u003c\/strong\u003e is a 16-channel compact analog 4-bus mixer from the \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003estudio and recording equipment\u003c\/a\u003e category in which every one of the 16 channels carries an Onyx preamp, a line input and a balanced insert — with no exceptions and no division into first- and second-class channels. Main mix noise of -88.5 dBu (92 dB S\/N ref +4 dBu), EIN of -128.5 dBu and THD below 0.0007% at 35 dB gain place the 1604VLZ4 above most compact mixers in this format. It is a long-established platform in professional broadcast and post-production facilities, on stage and in conference rooms across more than two decades.\u003c\/p\u003e\n\n  \u003ch3\u003e16 Onyx preamps and 16 balanced inserts — one quality level across every channel\u003c\/h3\u003e\n\n  \u003cp\u003eUnlike the 1642VLZ4, where stereo channels carry a different EQ and some channels lack inserts, the 1604VLZ4 treats all 16 channels identically: each has an Onyx preamp with a 60 dB gain range, 3-band EQ with sweepable mid (100 Hz to 8 kHz, ±15 dB), an 18 dB\/octave low-cut filter at 75 Hz and a full balanced insert. That means 16 parallel insert points through which an external compressor, EQ or effect unit can be patched without any routing behind the console. Six aux sends — four standard and two additional via a SHIFT 5\/6 button — support complex monitoring configurations and multi-loop effect setups simultaneously.\u003c\/p\u003e\n\n  \u003ch3\u003eControl room section, eight direct outs and four stereo returns\u003c\/h3\u003e\n\n  \u003cp\u003eChannels 1-8 carry direct outputs for recording each of those channels to a separate track without affecting the rest of the mix. The dedicated control room section with a source matrix (main mix or tape in) and independent level control enables monitoring of different signals without disturbing the main bus — standard practice in broadcast and post-production applications. Four stereo returns accommodate effect processors or additional stereo sources. The mixer mounts in a rack in three physical configurations via the Rotopod accessory (sold separately) or with the included standard rack ears. A powder-coated steel chassis and sealed rotary controls close the picture of a console built for both studio and road.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e16 channels, each with Onyx preamp, line input and balanced insert\u003c\/li\u003e\n    \u003cli\u003e4-bus architecture (4 subgroups + L\/R main bus)\u003c\/li\u003e\n    \u003cli\u003e16 Onyx mic preamps — 60 dB gain range, EIN -128.5 dBu, THD \u0026lt; 0.0007%\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 128.5 dB\u003c\/li\u003e\n    \u003cli\u003e16 balanced inserts on every channel\u003c\/li\u003e\n    \u003cli\u003eEQ (all channels): 3-band with sweepable mid 100 Hz – 8 kHz, ±15 dB + 18 dB\/oct low-cut @ 75 Hz\u003c\/li\u003e\n    \u003cli\u003e6 aux sends (4 standard + 2 via SHIFT 5\/6)\u003c\/li\u003e\n    \u003cli\u003e4 stereo returns\u003c\/li\u003e\n    \u003cli\u003e8 direct outputs (channels 1-8)\u003c\/li\u003e\n    \u003cli\u003e4 group\/bus outputs\u003c\/li\u003e\n    \u003cli\u003eDedicated control room section with source matrix\u003c\/li\u003e\n    \u003cli\u003e+48 V phantom power (global switch)\u003c\/li\u003e\n    \u003cli\u003ePFL solo\u003c\/li\u003e\n    \u003cli\u003e60 mm log-taper faders\u003c\/li\u003e\n    \u003cli\u003e12-segment stereo meters\u003c\/li\u003e\n    \u003cli\u003eSealed rotary controls\u003c\/li\u003e\n    \u003cli\u003ePowder-coated steel chassis, rack ears included\u003c\/li\u003e\n    \u003cli\u003eMulti-voltage universal power supply\u003c\/li\u003e\n    \u003cli\u003eWeight: 9.1 kg\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eChannels: 16 (all mono, identical specification)\u003c\/li\u003e\n    \u003cli\u003eArchitecture: 4-bus (4 subgroups + L\/R main bus)\u003c\/li\u003e\n    \u003cli\u003eMain mix noise (fader unity, channels down): -88.5 dBu (S\/N 92 dB ref +4 dBu)\u003c\/li\u003e\n    \u003cli\u003eMain mix noise (fader unity, channels unity): -82.5 dBu\u003c\/li\u003e\n    \u003cli\u003eTHD (1 kHz @ 35 dB gain): mic in → insert send \u0026lt; 0.0007% \/ mic in → main out \u0026lt; 0.005%\u003c\/li\u003e\n    \u003cli\u003eEIN (mic input → insert send, max gain, 150 Ω): -128.5 dBu (20 Hz – 20 kHz)\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 128.5 dB\u003c\/li\u003e\n    \u003cli\u003eCMRR: \u0026gt; 70 dB @ 1 kHz\u003c\/li\u003e\n    \u003cli\u003eFrequency response: +0\/-1 dB, 20 Hz – 50 kHz\u003c\/li\u003e\n    \u003cli\u003eAttenuation\/crosstalk (1 kHz): mute -84 dBu \/ gain down -84 dBu\u003c\/li\u003e\n    \u003cli\u003eMaximum input levels: mic in +22 dBu \/ all other inputs +22 dBu\u003c\/li\u003e\n    \u003cli\u003eMaximum output levels: main TRS out +28 dBu \/ all other outputs +22 dBu\u003c\/li\u003e\n    \u003cli\u003eMic input impedance: 2.5 kΩ\u003c\/li\u003e\n    \u003cli\u003eOther input impedances: 10 kΩ or greater\u003c\/li\u003e\n    \u003cli\u003eOutput impedances: 120 Ω (tape out 1.1 kΩ)\u003c\/li\u003e\n    \u003cli\u003eEQ (all channels, 3-band): High shelf ±15 dB @ 12 kHz \/ Mid peak ±15 dB sweep 100 Hz – 8 kHz \/ Low shelf ±15 dB @ 80 Hz \/ low-cut 18 dB\/oct @ 75 Hz\u003c\/li\u003e\n    \u003cli\u003ePower consumption: 50 W\u003c\/li\u003e\n    \u003cli\u003ePower supply: 100–120 V AC \/ 200–240 V AC, 50–60 Hz (multi-voltage)\u003c\/li\u003e\n    \u003cli\u003eOperating temperature: 0°C – 40°C\u003c\/li\u003e\n    \u003cli\u003eDimensions: 44.0 cm (W) x 43.3 cm (D) x 12.9 cm (H)\u003c\/li\u003e\n    \u003cli\u003eWeight: 9.1 kg (20.0 lbs)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444585599308,"sku":"1245","price":899.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MACKIE1604VLZ41.jpg?v=1786979603"},{"product_id":"mackie-1402-vlz-4","title":"MACKIE 1402 VLZ 4","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMackie 1402 VLZ4\u003c\/strong\u003e – a compact \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003eanalog mixer\u003c\/a\u003e with 14 channels, designed for low-noise performance, high headroom and reliable operation in both live and studio environments.\u003c\/p\u003e\n\n\u003ch3\u003eCompact format with flexible routing\u003c\/h3\u003e\n\u003cp\u003eThe mixer features 6 mono channels with Onyx mic preamps and 4 stereo channels, delivering 14 total inputs. Mono channels include inserts, 3-band EQ and low-cut filters. The ALT 3\/4 bus enables fast signal rerouting, solving typical workflow limitations in small-format mixers. Two AUX sends (pre\/post) and two stereo returns provide integration with outboard gear and monitor mixes.\u003c\/p\u003e\n\n\u003ch3\u003eVLZ4 headroom and reliability\u003c\/h3\u003e\n\u003cp\u003eSix Onyx preamps provide up to 60 dB of gain with a wide 128.5 dB dynamic range and +22 dBu line handling. The low-noise design with improved RF rejection ensures stable performance in broadcast and live setups. Fully analog architecture without built-in FX or USB keeps signal flow predictable and robust.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e14-channel analog mixer (6 mono + 4 stereo)\u003c\/li\u003e\n\u003cli\u003e6 Onyx microphone preamps\u003c\/li\u003e\n\u003cli\u003eUp to 60 dB gain range\u003c\/li\u003e\n\u003cli\u003e3-band EQ on mono channels\u003c\/li\u003e\n\u003cli\u003e75 Hz high-pass filter (18 dB\/oct)\u003c\/li\u003e\n\u003cli\u003e2 AUX sends (1 pre\/post, 1 post)\u003c\/li\u003e\n\u003cli\u003e2 stereo AUX returns\u003c\/li\u003e\n\u003cli\u003eALT 3\/4 routing bus\u003c\/li\u003e\n\u003cli\u003eChannel inserts on inputs 1–6\u003c\/li\u003e\n\u003cli\u003eNo FX or USB – pure analog signal path\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 14\u003c\/li\u003e\n\u003cli\u003eMic inputs: 6 x XLR (Onyx preamps)\u003c\/li\u003e\n\u003cli\u003eLine inputs: 6 x mono TRS + 4 x stereo\u003c\/li\u003e\n\u003cli\u003eEQ: 3-band (80 Hz \/ 2.5 kHz \/ 12 kHz)\u003c\/li\u003e\n\u003cli\u003eLow-cut filter: 75 Hz, 18 dB\/oct\u003c\/li\u003e\n\u003cli\u003eAUX sends: 2, with 2 stereo returns\u003c\/li\u003e\n\u003cli\u003eInserts: channels 1–6\u003c\/li\u003e\n\u003cli\u003eOutputs: XLR, TRS, RCA (Main, Control Room, ALT)\u003c\/li\u003e\n\u003cli\u003eDynamic range: 128.5 dB\u003c\/li\u003e\n\u003cli\u003eMax input level: +22 dBu\u003c\/li\u003e\n\u003cli\u003ePhantom power: 48 V\u003c\/li\u003e\n\u003cli\u003eDimensions: 356 x 81 x 317 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 4.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444585664844,"sku":"1244","price":1749.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MACKIE1402VLZ41.jpg?v=1786979604"},{"product_id":"mackie-2404-vlz-4","title":"MACKIE 2404 VLZ 4","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMackie 2404 VLZ4\u003c\/strong\u003e – professional \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003eanalog mixer\u003c\/a\u003e with 24 channels and 4-bus architecture, designed for live sound and fixed installations. Equipped with 20 Onyx mic preamps, it delivers high headroom, low noise and consistent performance across complex setups.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align:center;\"\u003eAdvanced routing for live and studio workflows\u003c\/h3\u003e\n\u003cp\u003eThe console provides 4 subgroups, 6 AUX sends (pre\/post), inserts and a flexible monitoring section. Each mono channel features a 3-band EQ with sweepable midrange and a 100 Hz low-cut filter, allowing precise tone shaping and feedback control in demanding environments.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align:center;\"\u003eBuilt-in FX and USB recording\u003c\/h3\u003e\n\u003cp\u003eDual 32-bit RMFX+ processors offer 24 effects including reverbs, delays and modulation, reducing the need for external processors. The integrated 4x2 USB interface enables direct recording of main mix or subgroups into a DAW. Inline compressors on channels 17–20 provide quick dynamic control on key sources.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24-channel analog mixer with 4-bus architecture\u003c\/li\u003e\n\u003cli\u003e20 Onyx microphone preamps (up to 60 dB gain)\u003c\/li\u003e\n\u003cli\u003e3-band EQ with sweepable midrange (mono channels)\u003c\/li\u003e\n\u003cli\u003e100 Hz low-cut filter (18 dB\/oct)\u003c\/li\u003e\n\u003cli\u003e6 AUX sends for monitoring and FX routing\u003c\/li\u003e\n\u003cli\u003e4 subgroups with flexible routing\u003c\/li\u003e\n\u003cli\u003eInline compressors on channels 17–20\u003c\/li\u003e\n\u003cli\u003eDual RMFX+ processors (24 effects)\u003c\/li\u003e\n\u003cli\u003e4x2 USB audio interface (24-bit)\u003c\/li\u003e\n\u003cli\u003e60 mm faders and high-resolution metering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 24\u003c\/li\u003e\n\u003cli\u003eMic preamps: 20x Onyx\u003c\/li\u003e\n\u003cli\u003eInputs: 20x XLR, 20x line (TRS), stereo RCA\u003c\/li\u003e\n\u003cli\u003eEQ: 3-band with sweepable mid (mono channels)\u003c\/li\u003e\n\u003cli\u003eFilter: 100 Hz low cut\u003c\/li\u003e\n\u003cli\u003eAUX sends: 6 (pre\/post)\u003c\/li\u003e\n\u003cli\u003eSubgroups: 4\u003c\/li\u003e\n\u003cli\u003eInserts: available on channels\/groups\u003c\/li\u003e\n\u003cli\u003eEffects: 2x RMFX+ 32-bit (24 presets)\u003c\/li\u003e\n\u003cli\u003eUSB: 4x2, 24-bit\u003c\/li\u003e\n\u003cli\u003eCompressors: channels 17–20\u003c\/li\u003e\n\u003cli\u003ePhantom power: 48 V\u003c\/li\u003e\n\u003cli\u003eFaders: 60 mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid steel chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444585795916,"sku":"1223","price":1109.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MACKIE2404VLZ41.jpg?v=1786979607"},{"product_id":"mackie-1202-vlz-4","title":"MACKIE 1202 VLZ 4","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMackie 1202 VLZ4\u003c\/strong\u003e – compact \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003eanalog mixer\u003c\/a\u003e with 12 channels, designed for small studio setups, live rigs and broadcast environments. The VLZ4 architecture with Onyx mic preamps delivers high headroom, low noise and consistent performance across different signal sources.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align:center;\"\u003eCompact format with full analog signal path\u003c\/h3\u003e\n\u003cp\u003eThe mixer features 4 mono channels with Onyx mic preamps (up to 60 dB gain) and 4 stereo channels. Each mono channel includes a 3-band EQ (80 Hz \/ 2.5 kHz \/ 12 kHz) and a 75 Hz low-cut filter. Channel inserts (1–4) allow integration with external processors, extending the mixer’s flexibility beyond its size class.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align:center;\"\u003eFlexible routing for studio and live use\u003c\/h3\u003e\n\u003cp\u003eTwo AUX sends (switchable pre\/post) and two stereo returns support monitor mixes and external FX routing. Dedicated Control Room section, ALT 3\/4 outputs and full signal monitoring make 1202 VLZ4 suitable for hybrid workflows. Fully analog design ensures predictable operation without digital layers.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12-channel analog mixer (4 mono + 4 stereo)\u003c\/li\u003e\n\u003cli\u003e4 Onyx microphone preamps (up to 60 dB gain)\u003c\/li\u003e\n\u003cli\u003e3-band EQ on mono channels\u003c\/li\u003e\n\u003cli\u003e75 Hz low-cut filter (18 dB\/oct)\u003c\/li\u003e\n\u003cli\u003e2 AUX sends (pre\/post configurable)\u003c\/li\u003e\n\u003cli\u003e2 stereo AUX returns\u003c\/li\u003e\n\u003cli\u003eChannel inserts on channels 1–4\u003c\/li\u003e\n\u003cli\u003eALT 3\/4 and Control Room outputs\u003c\/li\u003e\n\u003cli\u003eHigh-resolution LED metering\u003c\/li\u003e\n\u003cli\u003eRugged steel chassis construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 12 (4 mono + 4 stereo)\u003c\/li\u003e\n\u003cli\u003eMic preamps: 4x Onyx\u003c\/li\u003e\n\u003cli\u003eGain range: up to 60 dB\u003c\/li\u003e\n\u003cli\u003eEQ: 3-band (80 Hz \/ 2.5 kHz \/ 12 kHz)\u003c\/li\u003e\n\u003cli\u003eFilter: 75 Hz low cut (18 dB\/oct)\u003c\/li\u003e\n\u003cli\u003eInputs: 4x XLR\/TRS combo, 8x line (TRS)\u003c\/li\u003e\n\u003cli\u003eInserts: channels 1–4\u003c\/li\u003e\n\u003cli\u003eAUX: 2 sends + 2 stereo returns\u003c\/li\u003e\n\u003cli\u003eOutputs: Main Out (XLR\/TRS), Control Room, ALT 3\/4\u003c\/li\u003e\n\u003cli\u003ePhantom power: 48 V\u003c\/li\u003e\n\u003cli\u003eUSB interface: none\u003c\/li\u003e\n\u003cli\u003eEffects: none\u003c\/li\u003e\n\u003cli\u003eDimensions: approx. 303 x 75 x 284 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 3.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":58444585861452,"sku":"1220","price":1290.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/MACKIE1202VLZ41.jpg?v=1786979607"},{"product_id":"presonus-studiolive-32r-rack-mixer","title":"PreSonus StudioLive 32R","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 32R\u003c\/strong\u003e – professional \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003edigital mixer\u003c\/a\u003e in a 2U rack format, designed as an AVB stagebox, monitor mixer or standalone FOH system. The Series III platform with FLEX DSP delivers full routing flexibility and onboard processing without external gear.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align:center;\"\u003eAdvanced routing and full mixing architecture\u003c\/h3\u003e\n\u003cp\u003e32 XLR\/TRS combo inputs and a 40-channel mixing engine handle complex live and studio setups. The system includes 16 FlexMix buses configurable as aux, subgroups or matrix, along with 4 FX buses and 24 DCA groups. Every channel and bus features Fat Channel processing (HPF, gate, compressor, limiter, EQ), eliminating the need for outboard processing.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align:center;\"\u003eMultitrack recording and network integration\u003c\/h3\u003e\n\u003cp\u003eThe built-in 64x64 USB interface enables full multitrack recording directly to a DAW. Stereo SD recording allows standalone operation without a computer. AVB networking enables seamless integration as a stagebox for StudioLive consoles or as a central monitoring hub.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2U rackmount digital mixer (Series III)\u003c\/li\u003e\n\u003cli\u003e32 mic\/line inputs (XLR\/TRS combo)\u003c\/li\u003e\n\u003cli\u003e24 XMAX mic preamps (digitally controlled)\u003c\/li\u003e\n\u003cli\u003e40-channel mixing engine\u003c\/li\u003e\n\u003cli\u003e16 FlexMix buses (aux\/subgroup\/matrix)\u003c\/li\u003e\n\u003cli\u003e4 FX processors (reverb, delay)\u003c\/li\u003e\n\u003cli\u003eFat Channel processing on all inputs and buses\u003c\/li\u003e\n\u003cli\u003e24 DCA groups\u003c\/li\u003e\n\u003cli\u003e64x64 USB audio interface\u003c\/li\u003e\n\u003cli\u003eStereo SD card recording\u003c\/li\u003e\n\u003cli\u003eAVB networking support\u003c\/li\u003e\n\u003cli\u003eRemote control via UC Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: digital rack mixer \/ stagebox\u003c\/li\u003e\n\u003cli\u003eInputs: 32x XLR\/TRS combo + stereo RCA\u003c\/li\u003e\n\u003cli\u003ePreamps: 24x XMAX (Class A, recallable)\u003c\/li\u003e\n\u003cli\u003eMixing channels: 40\u003c\/li\u003e\n\u003cli\u003eMix buses: 22 (FlexMix, FX, Main)\u003c\/li\u003e\n\u003cli\u003eFlexMix: 16 (aux\/subgroup\/matrix)\u003c\/li\u003e\n\u003cli\u003eFX engines: 4\u003c\/li\u003e\n\u003cli\u003eUSB: 64x64 (USB 2.0)\u003c\/li\u003e\n\u003cli\u003eAVB: yes (55x55)\u003c\/li\u003e\n\u003cli\u003eMain outputs: 2x XLR\u003c\/li\u003e\n\u003cli\u003eMix outputs: 16x TRS\u003c\/li\u003e\n\u003cli\u003eHeadphone output: 1x TRS\u003c\/li\u003e\n\u003cli\u003ePhantom power: 48 V\u003c\/li\u003e\n\u003cli\u003eConversion: 24-bit \/ 48 kHz\u003c\/li\u003e\n\u003cli\u003eDynamic range: approx. 115 dB\u003c\/li\u003e\n\u003cli\u003eForm factor: 19” \/ 2U rack\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444586123596,"sku":"52746","price":1713.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLive32R1.jpg?v=1786979611"},{"product_id":"behringer-flow-8","title":"Behringer FLOW 8","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eBehringer FLOW 8\u003c\/strong\u003e is an incredibly compact and highly versatile 8-input digital mixer, perfectly suited for \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-and-recording-equipment\"\u003estudio and recording equipment\u003c\/a\u003e setups, small live gigs, and streaming applications. This device bridges the gap between traditional tactile mixing with physical faders and the advanced processing power of a digital console. Featuring built-in Bluetooth connectivity, a dedicated remote control app, and a multi-channel USB audio interface, the FLOW 8 delivers massive capabilities in a lightweight enclosure weighing just 1.4 kg.\u003c\/p\u003e\n\u003cp\u003eThe mixer is equipped with two Midas-designed microphone preamps featuring +48V phantom power, two universal Mic\/Line (combo) inputs, and two pairs of stereo line inputs. One of these stereo pairs offers Hi-Z compatibility for directly connecting guitars or basses. Every input channel features a 4-band EQ and a compressor, while the Main and two Monitor outputs are fitted with a 9-band graphic EQ and a limiter to prevent unexpected volume peaks. The innovative EZ-Gain feature allows for automatic gain staging, drastically simplifying and speeding up your setup process before a show or recording session.\u003c\/p\u003e\n\u003cp\u003eOnboard, you will find two independent studio-grade effect engines, each offering 16 presets (including reverbs, delays, and modulation effects), with dedicated tap tempo and mute controls. The built-in USB interface allows for 24-bit\/48 kHz multitrack recording and playback, while the additional Bluetooth audio channel lets you stream backing tracks directly from your smartphone. The unit is powered via a standard Micro-USB connection, meaning it can easily be run off a standard power bank for truly mobile mixing situations.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-compact 8-input digital mixer with high headroom and low noise\u003c\/li\u003e\n\u003cli\u003eTwo premium microphone preamps (XLR) with +48V Phantom power\u003c\/li\u003e\n\u003cli\u003eTwo additional Mic\/Line inputs (Combo) and four line inputs (including two Hi-Z)\u003c\/li\u003e\n\u003cli\u003eEZ-Gain function for automatic and secure gain level calibration\u003c\/li\u003e\n\u003cli\u003eTwo independent studio-grade FX engines (16 presets each) with Tap Tempo\u003c\/li\u003e\n\u003cli\u003eBuilt-in 10-channel USB audio interface (24-bit\/48 kHz) for multitrack recording\u003c\/li\u003e\n\u003cli\u003eWireless remote control via Bluetooth using the FLOW Mix app (iOS\/Android)\u003c\/li\u003e\n\u003cli\u003eDirect wireless audio streaming from mobile devices (Bluetooth Audio)\u003c\/li\u003e\n\u003cli\u003eSmooth 60 mm channel faders for intuitive hands-on mixing\u003c\/li\u003e\n\u003cli\u003eUSB bus-powered design allows operation via a standard power bank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMic Inputs: 2 x XLR, 2 x Combo XLR\/TRS\u003c\/li\u003e\n\u003cli\u003eLine Inputs: 4 x 1\/4\" TRS (including 2 x Hi-Z)\u003c\/li\u003e\n\u003cli\u003eMain Outputs: 2 x XLR balanced\u003c\/li\u003e\n\u003cli\u003eMonitor Outputs: 2 x 1\/4\" TRS balanced\u003c\/li\u003e\n\u003cli\u003eHeadphone Output: 1 x 1\/4\" TRS stereo\u003c\/li\u003e\n\u003cli\u003eFootswitch Input: 1 x 1\/4\" TRS (for FX\/Snapshot control)\u003c\/li\u003e\n\u003cli\u003eDSP Processing: 32-bit Vector Floating Point (VFP)\u003c\/li\u003e\n\u003cli\u003eUSB Interface: USB 2.0, Type B (10 out \/ 2 in channels)\u003c\/li\u003e\n\u003cli\u003eAudio Resolution: 24-bit \/ 48 kHz\u003c\/li\u003e\n\u003cli\u003ePower Supply: Micro-USB, 5 VDC, 2A (adapter included)\u003c\/li\u003e\n\u003cli\u003eBluetooth: Version 4.0, up to 12 m range\u003c\/li\u003e\n\u003cli\u003eDimensions: 48 × 229 × 172 mm (1.9\" x 9.0\" x 6.8\")\u003c\/li\u003e\n\u003cli\u003eWeight: Approx. 1.4 kg (3.1 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"BEHRINGER","offers":[{"title":"Default Title","offer_id":58444595528012,"sku":"59074","price":175.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/BehringerFLOW81.jpg?v=1786979721"},{"product_id":"ecler-nuo-4-0f-silver","title":"Ecler NUO 4.0F Silver","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eEcler NUO 4.0F Silver\u003c\/strong\u003e is the silver special‑edition of Ecler’s professional 4‑channel analogue DJ mixer, created to celebrate the company’s 60th anniversary and the 20‑year legacy of the NUO series. It combines the classic NUO sound and layout with two analogue VCF filters, dual PFL systems for B2B sets, comprehensive FX routing and a robust build, making it a powerful choice for clubs, bars, festivals and high‑end home or studio setups.\u003c\/p\u003e\n\u003cp\u003eThe NUO 4.0F Silver features four main channels with switchable PHONO\/LINE inputs, an AUX input and a dedicated microphone input on an XLR\/jack combo. Each channel offers a precise 3‑band full‑cut EQ (Bass +10\/‑30 dB, Mid +10\/‑25 dB, Treble +10\/‑30 dB) and its own FX Send with Pre\/Post fader selection. Two analogue VCF filters (HP\/LP) with a 20 Hz–20 kHz range and up to +12 dB resonance can be freely assigned to any channel, including the FX Return. Two fully independent PFL systems with four headphone outputs (2 × 6.3 mm, 2 × 3.5 mm) make back‑to‑back mixing effortless, while balanced and unbalanced MASTER and BOOTH outputs, a dedicated REC output, master insert, detailed LED metering and 60 mm Ecler faders with curve adjustment provide full professional control.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional 4‑channel fully analogue DJ mixer – Ecler NUO 4.0F Silver edition\u003c\/li\u003e\n\u003cli\u003eDeveloped to mark Ecler’s 60th anniversary and 20 years of the NUO series\u003c\/li\u003e\n\u003cli\u003e4 PHONO\/LINE channels plus 1 AUX input and 1 MIC input (XLR\/jack combo)\u003c\/li\u003e\n\u003cli\u003eTwo analogue HP\/LP VCF filters with variable resonance, assignable to any channel including FX Return\u003c\/li\u003e\n\u003cli\u003eTwo independent PFL headphone systems and 4 headphone outputs (2 × 6.3 mm, 2 × 3.5 mm) – ideal for B2B DJ sets\u003c\/li\u003e\n\u003cli\u003e3‑band full‑cut EQ on each of the four channels (Bass +10\/‑30 dB, Mid +10\/‑25 dB, Treble +10\/‑30 dB)\u003c\/li\u003e\n\u003cli\u003ePer‑channel FX Send with level control and Pre\/Post fader selector, plus FX Return level with PFL\u003c\/li\u003e\n\u003cli\u003e60 mm Ecler faders with adjustable curve, VCA crossfader compatible with the ETERNAL magnetic crossfader\u003c\/li\u003e\n\u003cli\u003eMaster insert on 6.3 mm jack for external dynamics or processing units\u003c\/li\u003e\n\u003cli\u003ePremium silver finish, high‑quality components and Spanish manufacture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: 4‑channel analogue DJ mixer\u003c\/li\u003e\n\u003cli\u003eInputs: 4 × PHONO\/LINE (RCA), 1 × AUX (RCA), 1 × MIC (XLR\/jack combo), 1 × FX RETURN (stereo RCA)\u003c\/li\u003e\n\u003cli\u003eOutputs: MASTER and BOOTH on balanced XLR and unbalanced RCA, REC (stereo RCA), FX SEND (stereo RCA), MASTER insert (6.3 mm jack)\u003c\/li\u003e\n\u003cli\u003eChannel EQ (1–4): 3‑band EQ, Bass +10\/‑30 dB, Mid +10\/‑25 dB, Treble +10\/‑30 dB\u003c\/li\u003e\n\u003cli\u003eVCF filters: 2 × analogue HP\/LP, frequency range approx. 20 Hz–20 kHz, max. resonance approx. +12 dB\u003c\/li\u003e\n\u003cli\u003eHeadphones: 4 outputs – 2 × 6.3 mm and 2 × 3.5 mm, dual independent PFL systems with split mode\u003c\/li\u003e\n\u003cli\u003eFrequency response (LINE): approx. 10 Hz–30 kHz (‑1 dB)\u003c\/li\u003e\n\u003cli\u003eTHD+N (LINE): \u0026lt;0.03%, high signal‑to‑noise ratio (LINE typically \u0026gt;100 dB)\u003c\/li\u003e\n\u003cli\u003eMaximum undistorted output level: approx. 21 dBV (about 23 dBu)\u003c\/li\u003e\n\u003cli\u003eMeters: 12‑segment LED VU meters for inputs and HOUSE\/MIX\/BOOTH sections\u003c\/li\u003e\n\u003cli\u003ePower: internal PSU, 90–264 V AC, 47–63 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): approx. 320 × 79.4 × 372 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 4.7–4.8 kg\u003c\/li\u003e\n\u003cli\u003eColour: Silver, made in Spain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Ecler","offers":[{"title":"Default Title","offer_id":58444597199180,"sku":"58873","price":963.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/EclerNUO4.0FSilver1.jpg?v=1786979736"},{"product_id":"ecler-warm-2","title":"Ecler WARM 2 - DJ Mixer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eEcler WARM 2\u003c\/strong\u003e is a professional, fully analog 2‑channel rotary DJ mixer designed to deliver a characterful, musical and truly “warm” sound. With its compact footprint, classic rotary layout and 3‑band isolator, the WARM 2 is perfectly suited for house, disco, techno and eclectic DJ sets in clubs, bars, audiophile listening rooms or home studios.\u003c\/p\u003e\n\u003cp\u003eThe mixer features a 2+1 channel configuration: two main channels switchable between PHONO and LINE sources, plus a dedicated MICRO\/LINE channel that can be used either as a microphone input or as a third stereo line input. Channels 1 and 2 offer a full‑cut 3‑band EQ, while the MIC\/LINE channel is equipped with a full‑cut 2‑band EQ. A powerful 3‑band isolator (with crossover points around 300 Hz and 4 kHz, 24 dB\/oct slope) lets you aggressively sculpt lows, mids and highs. The output section includes a balanced\/unbalanced MASTER (HOUSE) output, BOOTH\/monitor output, record output, and dual headphone outputs (6.3 mm and 3.5 mm), all supported by a large 12‑segment LED meter for MIX and PFL.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional fully analog 2‑channel rotary DJ mixer with 2+1 channel architecture\u003c\/li\u003e\n\u003cli\u003e2 PHONO inputs, 3 LINE inputs and 1 MICRO input (channel 3 switchable MIC\/LINE)\u003c\/li\u003e\n\u003cli\u003e3‑band full‑cut EQ (bass, mid, treble) on the two main channels\u003c\/li\u003e\n\u003cli\u003e2‑band full‑cut EQ on the MICRO\/LINE channel\u003c\/li\u003e\n\u003cli\u003eDedicated 3‑band isolator (approx. 300 Hz and 4 kHz, about −∞ \/ +12 dB, 24 dB\/oct) for creative sound shaping\u003c\/li\u003e\n\u003cli\u003eFX Send with level control and Pre\/Post fader switch for external effects\u003c\/li\u003e\n\u003cli\u003eLarge 12‑segment LED MIX and PFL VU meter for precise level monitoring\u003c\/li\u003e\n\u003cli\u003ePremium ALPS Blue Velvet rotary potentiometers for exceptionally smooth volume control\u003c\/li\u003e\n\u003cli\u003eWooden side panels and custom aluminium knobs for a premium, vintage‑inspired look\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 2 × PHONO (RCA), 3 × LINE (RCA), 1 × MICRO (6.3 mm TRS jack), FX RETURN (stereo RCA)\u003c\/li\u003e\n\u003cli\u003eOutputs: MASTER (HOUSE) balanced XLR + RCA, BOOTH\/Monitor (RCA), RECORD\/HOUSE output, headphone outputs 6.3 mm and 3.5 mm stereo jacks\u003c\/li\u003e\n\u003cli\u003eChannel EQ 1–2: 3‑band full‑cut EQ (bass \/ mid \/ treble)\u003c\/li\u003e\n\u003cli\u003eChannel EQ 3 (MIC\/LINE): 2‑band full‑cut EQ\u003c\/li\u003e\n\u003cli\u003eIsolator: 3‑band, crossover points around 300 Hz and 4 kHz, approx. −∞ \/ +12 dB range, 4th‑order 24 dB\/oct filters\u003c\/li\u003e\n\u003cli\u003eMaximum undistorted output level: approx. 21 dBV (around 23 dBu)\u003c\/li\u003e\n\u003cli\u003eSignal‑to‑noise ratio: high SNR figures for LINE \/ PHONO \/ MIC paths (typically above 85–99 dB depending on input)\u003c\/li\u003e\n\u003cli\u003ePhantom power for microphone input: approx. 18 V DC (default ON)\u003c\/li\u003e\n\u003cli\u003eMeters: 12‑segment LED bargraph for MIX and PFL (approx. −30 dBV to +20 dBV)\u003c\/li\u003e\n\u003cli\u003ePower supply: 90–264 V AC, 47–63 Hz, rated power consumption approx. 30 VA\u003c\/li\u003e\n\u003cli\u003eDimensions (without wooden sides): approx. 400 × 185 × 100 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 3.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Ecler","offers":[{"title":"Default Title","offer_id":58444599689548,"sku":"58871","price":629.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/EclerWARM21.jpg?v=1786979766"},{"product_id":"ecler-nuo-2-0-2-1-channel-dj-pro-mixer","title":"Ecler NUO 2.0 - DJ Mixer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eEcler NUO 2.0\u003c\/strong\u003e is a professional 2‑channel analogue DJ mixer designed for DJs of any style – from smooth house and techno blending to hip‑hop and scratching. It combines premium sound quality with a classic club layout, featuring full‑cut 3‑band EQ, comprehensive routing and FX options, robust VCA faders and a solid build that makes it suitable for clubs, bars, mobile setups and home studios alike.\u003c\/p\u003e\n\u003cp\u003eThe NUO 2.0 provides 2 main mixing channels plus a dedicated MICRO\/LINE channel, with a total of 2 PHONO inputs, 3 LINE inputs and a microphone input. Channels 1 and 2 feature a precise 3‑band full‑cut EQ with extra‑large ergonomic knobs and individual kill switches for lows, mids and highs, allowing very musical and creative sculpting of your mix. Each channel includes an FX Send with level control and Pre\/Post fader selector, while 45 mm long‑life VCA faders and a VCA crossfader with adjustable curve and reverse function make the mixer versatile for both smooth mixing and scratch performance. A dual VU meter for MASTER\/PFL, balanced XLR and unbalanced RCA MASTER outputs, plus a BOOTH output, round out its professional feature set.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional 2‑channel analogue DJ mixer (2 mixing channels + 1 MICRO\/LINE channel)\u003c\/li\u003e\n\u003cli\u003e2 PHONO inputs, 3 LINE inputs and 1 MICRO input for flexible source routing\u003c\/li\u003e\n\u003cli\u003e3‑band full‑cut EQ (bass, mid, treble) on channels 1–2 with large ergonomic knobs\u003c\/li\u003e\n\u003cli\u003eDedicated 3‑band EQ kill switches for instant cut of low, mid and high frequencies\u003c\/li\u003e\n\u003cli\u003ePer‑channel FX Send with level control and Pre\/Post fader selector for outboard effects\u003c\/li\u003e\n\u003cli\u003e45 mm long‑life VCA channel faders with adjustable fader curve\u003c\/li\u003e\n\u003cli\u003e45 mm VCA crossfader with adjustable curve and reverse, compatible with the ETERNAL magnetic crossfader (optional)\u003c\/li\u003e\n\u003cli\u003eDual LED VU meter for MASTER and PFL level monitoring\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and unbalanced RCA MASTER outputs plus BOOTH output on RCA\u003c\/li\u003e\n\u003cli\u003eRugged, compact chassis ideal for clubs, pubs, mobile DJs and small installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguration: 2 main mixing channels + 1 MICRO\/LINE channel\u003c\/li\u003e\n\u003cli\u003eInputs: 2 × PHONO (RCA), 3 × LINE (RCA), 1 × MICRO (6.3 mm jack), FX RETURN (stereo RCA)\u003c\/li\u003e\n\u003cli\u003eOutputs: MASTER balanced XLR, MASTER RCA, BOOTH RCA, REC output, FX SEND, headphones (6.3 mm jack)\u003c\/li\u003e\n\u003cli\u003eInput sensitivity (nominal): LINE 0 dBV \/ 50 kΩ, PHONO −40 dBV \/ 50 kΩ, MICRO −50 dBV \/ \u0026gt;1 kΩ, FX RETURN 0 dBV \/ \u0026gt;6 kΩ\u003c\/li\u003e\n\u003cli\u003eFrequency response: LINE approx. 10 Hz – 30 kHz (−1 dB); MICRO approx. 10 Hz – 25 kHz (−1 dB); PHONO with RIAA equalization ±0.5 dB\u003c\/li\u003e\n\u003cli\u003eSignal‑to‑noise ratio (typical): LINE \u0026gt;95 dB; PHONO \u0026gt;90 dB; MICRO \u0026gt;85 dB; FX RETURN \u0026gt;100 dB\u003c\/li\u003e\n\u003cli\u003eGain control: channels 1–2 ±15 dB; MICRO\/LINE channel ±20 dB\u003c\/li\u003e\n\u003cli\u003eEQ channels 1–2: BASS +10 \/ −30 dB, MID +10 \/ −25 dB, TREBLE +10 \/ −30 dB\u003c\/li\u003e\n\u003cli\u003eEQ MICRO\/LINE channel: BASS ±15 dB, TREBLE ±15 dB\u003c\/li\u003e\n\u003cli\u003eFaders: 45 mm VCA channel faders and 45 mm VCA crossfader with curve adjustment and reverse; compatible with ETERNAL crossfader\u003c\/li\u003e\n\u003cli\u003ePower: internal PSU, mains powered (around 230 V AC region‑dependent)\u003c\/li\u003e\n\u003cli\u003eDimensions (H × W × D): approx. 370 × 165 × 80 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Ecler","offers":[{"title":"Default Title","offer_id":58444599755084,"sku":"58870","price":418.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/EclerNUO2.0.jpg?v=1786979767"},{"product_id":"ecler-nuo-4-0f-black","title":"Ecler NUO 4.0F Black - DJ Mixer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eEcler NUO 4.0F Black\u003c\/strong\u003e is a special‑edition, professional 4‑channel analogue DJ mixer created to celebrate Ecler’s 60th anniversary and 20 years of the iconic NUO series. Compact yet extremely powerful, it combines the classic NUO sound and layout with two onboard analogue VCF filters, dual PFL systems for B2B sets, an extended FX section and flexible routing, making it ideal for clubs, bars, festivals and demanding home or studio setups.\u003c\/p\u003e\n\u003cp\u003eThe NUO 4.0F features 4 main channels with switchable PHONO\/LINE inputs, an extra AUX input and a dedicated microphone input on an XLR\/jack combo. Each channel is equipped with a precise 3‑band full‑cut EQ (Bass +10\/‑30 dB, Mid +10\/‑25 dB, Treble +10\/‑30 dB), an FX Send with Pre\/Post fader selection and assign buttons for the two analogue VCF filters (HP\/LP) with variable cutoff (approximately 20 Hz–20 kHz) and resonance (up to about +12 dB). Two completely independent PFL systems with four headphone outputs (2 × 6.3 mm, 2 × 3.5 mm) make back‑to‑back DJ sets effortless, while the output section offers MASTER and BOOTH on balanced XLR and unbalanced RCA, a dedicated REC output and a master insert on 1\/4\" jack for outboard processing.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional 4‑channel fully analogue DJ mixer – NUO 4.0F Black special edition\u003c\/li\u003e\n\u003cli\u003eDeveloped for Ecler’s 60th anniversary and 20 years of the NUO series\u003c\/li\u003e\n\u003cli\u003e4 PHONO\/LINE channels plus 1 AUX input and 1 dedicated MIC input (XLR\/jack combo)\u003c\/li\u003e\n\u003cli\u003eTwo analogue VCF filters (HP\/LP) with variable cutoff (20–20 000 Hz) and resonance (up to +12 dB), assignable to any channel and FX return\u003c\/li\u003e\n\u003cli\u003eTwo independent PFL headphone systems and 4 headphone outputs (2 × 6.3 mm, 2 × 3.5 mm) – perfect for B2B DJ sets\u003c\/li\u003e\n\u003cli\u003e3‑band full‑cut EQ on all four channels (Bass +10\/‑30 dB, Mid +10\/‑25 dB, Treble +10\/‑30 dB)\u003c\/li\u003e\n\u003cli\u003ePer‑channel FX Send with Pre\/Post fader selection, dedicated FX Return control with PFL\u003c\/li\u003e\n\u003cli\u003e60 mm Ecler channel faders with adjustable curve and VCA crossfader compatible with the ETERNAL magnetic crossfader\u003c\/li\u003e\n\u003cli\u003eMaster insert on 6.3 mm jack for compressors, limiters or other external processors\u003c\/li\u003e\n\u003cli\u003eSleek black finish, designed and manufactured in Spain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: 4‑channel analogue DJ mixer\u003c\/li\u003e\n\u003cli\u003eInputs: 4 × PHONO\/LINE (RCA), 1 × AUX (RCA), 1 × MIC (XLR\/jack combo), FX RETURN (stereo RCA)\u003c\/li\u003e\n\u003cli\u003eOutputs: MASTER and BOOTH on balanced XLR and unbalanced RCA, REC (stereo RCA), FX SEND (stereo RCA), MASTER insert (6.3 mm jack)\u003c\/li\u003e\n\u003cli\u003eChannels: 4 line\/phono channels + AUX + MIC\u003c\/li\u003e\n\u003cli\u003eChannel EQ (1–4): 3‑band EQ, Bass +10\/‑30 dB, Mid +10\/‑25 dB, Treble +10\/‑30 dB\u003c\/li\u003e\n\u003cli\u003eFilters: 2 × analogue VCF (HP\/LP), cutoff range approx. 20–20 000 Hz, max. resonance approx. +12 dB\u003c\/li\u003e\n\u003cli\u003eHeadphones: 4 outputs – 2 × 6.3 mm, 2 × 3.5 mm; dual independent PFL systems with split mode\u003c\/li\u003e\n\u003cli\u003eMeters: 12‑segment LED VU meters for input and HOUSE\/MIX\/BOOTH levels\u003c\/li\u003e\n\u003cli\u003eFaders: 60 mm Ecler faders with adjustable curve, VCA crossfader with adjustable curve and reverse, compatible with ETERNAL\u003c\/li\u003e\n\u003cli\u003eMax. undistorted output level: approx. 21 dBV (around 23 dBu)\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): approx. 320 × 79.4 × 372 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 4.7–4.8 kg\u003c\/li\u003e\n\u003cli\u003eColour: Black, made in Spain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Ecler","offers":[{"title":"Default Title","offer_id":58444599853388,"sku":"58874","price":935.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/EclerNUO4.0FBlack1.jpg?v=1786979768"},{"product_id":"ecler-warm-4","title":"Ecler WARM 4 - DJ Mixer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eEcler WARM 4\u003c\/strong\u003e is a professional four‑channel analogue rotary DJ mixer, designed and built by Ecler in Barcelona. It combines classic rotary ergonomics and sound with modern performance features: four phono\/line channels, two microphone inputs, sharp 3‑band filters, a 4th‑order 3‑band isolator and a unique analogue subharmonic synthesizer that reinforces ultra‑low frequencies for truly powerful, warm‑sounding sets.\u003c\/p\u003e\n\u003cp\u003eThe WARM 4 offers four full mixing channels, each with PHONO and LINE inputs, 3‑band full‑cut EQ and access to the global 3‑band isolator (with crossover points at around 300 Hz and 4 kHz, −∞ \/ +12 dB range, 24 dB\/oct slope). The analogue subharmonic synthesizer can be engaged per channel to generate and enhance sub‑bass content, allowing you to tailor the low‑end weight to the track and sound system. Every channel also features an FX Send with Pre\/Post fader selector, while the FX Return has its own level and PFL control. Master and Booth outputs are provided on both XLR and RCA, a headphone monitor is available on 6.3 mm and 3.5 mm jacks, and the mixer is equipped with high‑quality metal‑shaft ALPS potentiometers, custom one‑piece aluminium knobs and wooden side panels.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional 4‑channel fully analogue rotary DJ mixer\u003c\/li\u003e\n\u003cli\u003e4 mixing channels with both PHONO and LINE inputs on each channel\u003c\/li\u003e\n\u003cli\u003e2 independent microphone inputs for MCs, announcements or vocal performances\u003c\/li\u003e\n\u003cli\u003e3‑band full‑cut EQ on each channel (bass, mid, treble)\u003c\/li\u003e\n\u003cli\u003e3‑band isolator with crossover points at approx. 300 Hz and 4 kHz, −∞ \/ +12 dB range, 4th‑order 24 dB\/oct filters\u003c\/li\u003e\n\u003cli\u003eAnalogue subharmonic synthesizer for sub‑bass enhancement, selectable on a per‑channel basis\u003c\/li\u003e\n\u003cli\u003ePer‑channel FX Send with level control and Pre\/Post fader selector\u003c\/li\u003e\n\u003cli\u003eDedicated FX Return level control with PFL monitoring\u003c\/li\u003e\n\u003cli\u003eHigh‑quality ALPS metal‑shaft potentiometers and machined‑from‑solid aluminium knobs\u003c\/li\u003e\n\u003cli\u003eSupplied wooden side panels for a premium vintage‑inspired aesthetic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 4 × PHONO (RCA), 4 × LINE (RCA), 2 × MICRO (balanced XLR\/TRS), 1 × FX RETURN (stereo RCA)\u003c\/li\u003e\n\u003cli\u003eOutputs: MASTER on XLR and RCA, BOOTH on XLR and RCA, headphone monitor on 6.3 mm jack and 3.5 mm mini‑jack, FX SEND (stereo RCA)\u003c\/li\u003e\n\u003cli\u003eChannel EQ: 3‑band full EQ cut on all channels\u003c\/li\u003e\n\u003cli\u003eIsolator: 3‑band, crossover at approx. 300 Hz and 4 kHz, −∞ \/ +12 dB range, 4th‑order 24 dB\/oct\u003c\/li\u003e\n\u003cli\u003eSubharmonic synthesizer: analogue, sub‑bass frequency reinforcement, channel‑selectable\u003c\/li\u003e\n\u003cli\u003eMaximum output without distortion: 21 dBV (23 dBu)\u003c\/li\u003e\n\u003cli\u003eMeters: 12‑segment LED input VU meter, 12‑segment LED House\/Mix\/Booth VU meters, 3‑segment subharmonic output VU meter\u003c\/li\u003e\n\u003cli\u003ePower supply: internal, 90–264 V AC, 47–63 Hz, rated consumption 39 VA\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 340 × 81 × 372 mm (13.39\" × 3.19\" × 14.65\")\u003c\/li\u003e\n\u003cli\u003eWeight: 5.32 kg (11.73 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Ecler","offers":[{"title":"Default Title","offer_id":58444599918924,"sku":"58872","price":1250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/EclerWARM41.jpg?v=1786979770"},{"product_id":"presonus-studiolive-series-iii-se-24","title":"Presonus StudioLive Series III SE 24","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive Series III SE 24\u003c\/strong\u003e is an advanced 32-channel digital mixer combining a powerful 40-channel mix engine with the intuitive control of 25 touch-sensitive motorized faders. Featuring 24 recallable XMAX Class A microphone preamps and an integrated 64x64 USB audio interface, it enables seamless multitrack recording directly to a computer or the onboard 34-track SD card recorder. Its AVB Milan-ready certification ensures compatibility with the PreSonus network ecosystem, allowing easy expansion with NSB stageboxes and EarMix personal monitor mixers.\u003c\/p\u003e\n\u003cp\u003eAt the core of the \u003cstrong\u003eStudioLive Series III SE 24\u003c\/strong\u003e lies the dual-core FLEX DSP engine, powering the renowned Fat Channel processing on every input and bus with studio-grade vintage compressor and EQ emulations. With 16 configurable FlexMixes (Aux, Subgroup, Matrix), 4 dedicated subgroups, and 4 effects processors, the console delivers the routing flexibility essential for complex live sound setups and professional recording studios alike. Deep integration with Studio One DAW and Capture software makes it a complete production powerhouse.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e40-input channel mix engine with dual-core FLEX DSP\u003c\/li\u003e\n\u003cli\u003e24 local XMAX Class A microphone preamplifiers\u003c\/li\u003e\n\u003cli\u003e25 touch-sensitive motorized 100 mm faders\u003c\/li\u003e\n\u003cli\u003e64x64 USB audio interface (24-bit\/48 kHz)\u003c\/li\u003e\n\u003cli\u003eBuilt-in multitrack SD card recorder (34 tracks)\u003c\/li\u003e\n\u003cli\u003e16 FlexMixes (configurable as Aux, Subgroup, or Matrix)\u003c\/li\u003e\n\u003cli\u003eFat Channel with vintage EQ and compressor models on every channel\u003c\/li\u003e\n\u003cli\u003eAVB Networking (Milan-ready) for stageboxes and personal mixers\u003c\/li\u003e\n\u003cli\u003e4 dedicated effects slots (FLEX FX) with reverbs and delays\u003c\/li\u003e\n\u003cli\u003eSeamless Studio One DAW integration and Virtual Soundcheck with Capture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 32 (24 Mic\/Line + digital returns\/AVB)\u003c\/li\u003e\n\u003cli\u003ePreamps: 24 x XMAX Class A\u003c\/li\u003e\n\u003cli\u003eFaders: 25 motorized (24 channel + 1 Main)\u003c\/li\u003e\n\u003cli\u003eAnalog Inputs: 12 x XLR (Mic), 12 x XLR\/TRS Combo (Mic\/Line), 2 x RCA (Tape), 1 x XLR (Talkback)\u003c\/li\u003e\n\u003cli\u003eAnalog Outputs: 2 x XLR (Main), 1 x XLR (Mono\/Center), 2 x TRS (Monitor), 10 x XLR (Mix Out)\u003c\/li\u003e\n\u003cli\u003eDigital Interface: USB 2.0 (64x64), AVB (Ethernet)\u003c\/li\u003e\n\u003cli\u003eSD Recorder: 34 tracks (record\/playback)\u003c\/li\u003e\n\u003cli\u003eMix Buses: 26 (16 FlexMix, 4 Subgroups, 4 FX)\u003c\/li\u003e\n\u003cli\u003eProcessing: 32-bit floating point, 48 kHz\u003c\/li\u003e\n\u003cli\u003eConverter Dynamic Range: 115 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003ePower: 100-240V AC, 50-60 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions: 659 x 583 x 165 mm (25.9\" x 22.9\" x 6.5\")\u003c\/li\u003e\n\u003cli\u003eWeight: 13.6 kg (30 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PRESONUS","offers":[{"title":"Default Title","offer_id":58444609880396,"sku":"58648","price":3008.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PresonusStudioLiveSeriesIIISE241.jpg?v=1786979895"},{"product_id":"presonus-studiolive-16-0-2-usb-1","title":"PreSonus StudioLive 16.0.2 USB","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 16.0.2 USB\u003c\/strong\u003e is a compact 16-channel digital studio mixer with built-in 18x16 USB 2.0 interface (24-bit\/48 kHz), perfect for small bands, churches, and home recording studios. Featuring 12 Class-A XMAX mic preamps, it offers complete Fat Channel signal processing on every channel: 3-band parametric EQ, compressor, gate, limiter, and high-pass filter. Four Aux sends (pre\/post fader), dual 32-bit effects processors with reverb and delay presets, and 31-band graphic EQ on main outputs provide professional sound control.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eStudioLive 16.0.2 USB\u003c\/strong\u003e stands out with its intuitive analog-style interface featuring physical 60 mm faders, encoders, and color-coded function buttons for instant parameter access without menu diving. Multitrack recording direct to DAW (all 16 channels + main mix), user scenes, MIDI I\/O, and compact footprint make it versatile for both live and studio use. Rugged metal construction ensures reliability during extended performances.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 Class-A XMAX microphone preamplifiers\u003c\/li\u003e\n\u003cli\u003e8 mono + 4 stereo input channels\u003c\/li\u003e\n\u003cli\u003e18x16 USB 2.0 interface (24-bit\/48 kHz)\u003c\/li\u003e\n\u003cli\u003eFat Channel processing on all channels (EQ, comp, gate, limiter)\u003c\/li\u003e\n\u003cli\u003e4 Aux sends (pre\/post fader assignable)\u003c\/li\u003e\n\u003cli\u003e2x 32-bit effects processors (reverb, delay)\u003c\/li\u003e\n\u003cli\u003e31-band graphic EQ on main bus\u003c\/li\u003e\n\u003cli\u003e6-digit LED metering per channel\u003c\/li\u003e\n\u003cli\u003e99 user scenes + settings copy\/paste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput Channels: 16 (12 mono mic\/line + 4 stereo line)\u003c\/li\u003e\n\u003cli\u003ePreamps: 12x Class-A XMAX\u003c\/li\u003e\n\u003cli\u003eUSB I\/O: 18-in\/16-out (24-bit\/44.1\/48 kHz)\u003c\/li\u003e\n\u003cli\u003eProcessing: 32-bit floating point\u003c\/li\u003e\n\u003cli\u003eAux: 4 (pre\/post fader)\u003c\/li\u003e\n\u003cli\u003eFX: 2x 32-bit stereo effects processors\u003c\/li\u003e\n\u003cli\u003eGraphic EQ: 31-band stereo (main outputs)\u003c\/li\u003e\n\u003cli\u003eDigital Mixer: 16x16 internal routing\u003c\/li\u003e\n\u003cli\u003eDisplays: Fat Channel LCD + 15-LED meters\u003c\/li\u003e\n\u003cli\u003eFaders: 60 mm precision faders (16 channels)\u003c\/li\u003e\n\u003cli\u003eMIDI: In\/Out 5-pin\u003c\/li\u003e\n\u003cli\u003eInputs: 12x XLR\/TRS combo + 4x stereo TRS\/RCA\u003c\/li\u003e\n\u003cli\u003eOutputs: Main XLR, 4x Aux TRS, Monitor TRS, 2x FX\u003c\/li\u003e\n\u003cli\u003eHeadphones: 2x 1\/4\" stereo\u003c\/li\u003e\n\u003cli\u003ePower: Internal 100-230V\u003c\/li\u003e\n\u003cli\u003eDimensions: 460 x 164 x 489 mm (W x H x D)\u003c\/li\u003e\n\u003cli\u003eWeight: 8.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PRESONUS","offers":[{"title":"Default Title","offer_id":58444612895052,"sku":"58816","price":852.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLive16.0.2USB1.jpg?v=1786979926"},{"product_id":"waves-emotion-lv1-control","title":"Waves eMotion LV1 Control","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWaves eMotion LV1 Control\u003c\/strong\u003e is a premium hardware control surface designed to serve as the perfect fader extension for eMotion LV1 Classic consoles or as the primary fader bank for modular LV1 systems. Connecting via a single USB cable, it is built on the proven architecture of the Classic model, offering the same build quality and responsiveness. With 17 motorized 100mm faders and dedicated LCD displays above each channel, LV1 Control provides sound engineers with intuitive tactile command over their mix, eliminating the reliance solely on touchscreens.\u003c\/p\u003e\n\u003cp\u003eThe controller offers deep integration with the eMotion LV1 software, featuring advanced capabilities such as \u003cem\u003eTouch-and-Turn\u003c\/em\u003e mapping (controlling on-screen parameters via a physical encoder), dedicated Select\/Mute\/Solo toggles per channel, and 8 fader layers. Additionally, users have access to 16+2 programmable User Keys, a dedicated Tap Tempo pad, and a Utility section. Its rugged construction and internal power supply make it a reliable tool for touring and permanent installations where speed and precision are paramount.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e17 motorized 100mm faders\u003c\/li\u003e\n\u003cli\u003e17 rotary encoders with dedicated mini-LCD displays (metering and names)\u003c\/li\u003e\n\u003cli\u003eTouch-and-Turn function for controlling on-screen parameters\u003c\/li\u003e\n\u003cli\u003ePhysical Select, Mute, and Solo buttons per channel\u003c\/li\u003e\n\u003cli\u003e8 Fader Layers and 8 Utility keys\u003c\/li\u003e\n\u003cli\u003e16+2 fully customizable User Keys\u003c\/li\u003e\n\u003cli\u003eDedicated Tap Tempo pad\u003c\/li\u003e\n\u003cli\u003eInternal power supply (100-240V) and 12V XLR lamp connection\u003c\/li\u003e\n\u003cli\u003eDimensions: 561 mm x 396 mm x 116 mm, Weight: 6.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: USB Control Surface for eMotion LV1\u003c\/li\u003e\n\u003cli\u003eFaders: 17x 100mm Motorized Faders\u003c\/li\u003e\n\u003cli\u003eDisplays: 17x Mini LCD (Meter bridge + Channel Info)\u003c\/li\u003e\n\u003cli\u003eConnections: USB Type-B (Host connection), XLR 4-pin (Lamp)\u003c\/li\u003e\n\u003cli\u003ePower: Internal 100-240V AC\u003c\/li\u003e\n\u003cli\u003eCompatibility: Waves eMotion LV1 (Classic \u0026amp; Modular)\u003c\/li\u003e\n\u003cli\u003eWeight: 6.4 kg (14 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Waves","offers":[{"title":"Default Title","offer_id":58444614598988,"sku":"58809","price":1540.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/WaveseMotionLV1Control1.jpg?v=1786979949"},{"product_id":"waves-soundgrid-ionic-16-stagebox","title":"Waves Soundgrid IONIC 16 Stagebox","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWaves SoundGrid IONIC 16\u003c\/strong\u003e is a premium SoundGrid stagebox (16 in \/ 12 out) designed to deliver uncompromising audio quality for live sound systems, specifically tailored for integration with the eMotion LV1 mixer. At its core are 16 proprietary \u003cem\u003eWaves Signature Preamps\u003c\/em\u003e, featuring fully discrete analog circuits. These preamps deliver maximum headroom, lightning-fast transient response, and an incredibly low noise floor. A unique feature of the IONIC 16 is its selectable input impedance (Classic 2kΩ \/ Modern 7kΩ) and optional analog-modeled harmonic enhancement per channel, allowing for a warm, \"tube-like\" character right at the input stage.\u003c\/p\u003e\n\u003cp\u003eBuilt for the rigors of the road, the stagebox is housed in a rugged 2U metal chassis. In addition to 16 mic\/line inputs (Combo XLR\/TRS), it offers 12 crystal-clear line outputs with selectable levels (+18\/+24 dBu), stereo AES input\/output, and two independent, powerful headphone outputs. Thanks to SoundGrid connectivity (1GB Ethernet), the IONIC 16 integrates seamlessly into the Waves network, ensuring ultra-low latency and full remote control of all preamp parameters directly from the LV1 console.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 Mic\/Line inputs featuring Waves Signature Preamps\u003c\/li\u003e\n\u003cli\u003e12 Line outputs (selectable +18dBu \/ +24dBu)\u003c\/li\u003e\n\u003cli\u003eDiscrete preamps with optional analog harmonic enhancement\u003c\/li\u003e\n\u003cli\u003eSelectable Input Impedance: Classic (2kΩ) and Modern (7kΩ)\u003c\/li\u003e\n\u003cli\u003eStereo AES3 digital input and output\u003c\/li\u003e\n\u003cli\u003e2 independent, powerful headphone outputs\u003c\/li\u003e\n\u003cli\u003eSeamless integration with SoundGrid network and eMotion LV1 mixer\u003c\/li\u003e\n\u003cli\u003eSupports sample rates up to 96 kHz\u003c\/li\u003e\n\u003cli\u003eRugged 2U chassis with redundant power supply option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 16x XLR\/TRS Combo (Mic\/Line)\u003c\/li\u003e\n\u003cli\u003eOutputs: 12x XLR (Line Out)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 10 Hz - 40 kHz (+0.1\/-1.0 dB @ 96kHz)\u003c\/li\u003e\n\u003cli\u003eTHD+N (Input): -100 dB\u003c\/li\u003e\n\u003cli\u003eEIN (Equivalent Input Noise): -128 dBu (A-weighted)\u003c\/li\u003e\n\u003cli\u003eDigital Connections: 1x AES3 In\/Out (XLR), 1x SoundGrid (Ethernet)\u003c\/li\u003e\n\u003cli\u003ePower: Internal 100-240V + DC connector for redundancy\u003c\/li\u003e\n\u003cli\u003eDimensions: 2U Rack (482mm x 306mm x 87mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Waves","offers":[{"title":"Default Title","offer_id":58444614697292,"sku":"55234","price":2898.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/WavesSoundgridIONIC16Stagebox1.jpg?v=1786979951"},{"product_id":"waves-emotion-lv1-classic","title":"Waves eMotion LV1 Classic","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWaves eMotion LV1 Classic\u003c\/strong\u003e is a complete standalone live mixing console featuring 64 mono\/stereo channels (128 inputs) and 44 mono\/stereo buses, powered by the award-winning LV1 engine with 44.1-96 kHz sample rates and ultra-low 0.8 ms latency. Equipped with 16 inputs featuring proprietary Waves Signature Preamps and 12 line outputs, the console delivers full functionality in a compact 17-fader design with a 21.5\" HD touchscreen. The 32-bit floating point engine provides unlimited headroom and pristine audio clarity, while 16 built-in Waves processors (F6 Dynamic EQ, Tune Real-Time, eMo D5\/Q4\/F4, X-FDBK, R-Comp, Magma Tube Channel Strip, and more) eliminate the need for external DSP servers.\u003c\/p\u003e\n\u003cp\u003eThe intuitive interface features 17 Alps 100mm motorized faders, 17 encoders with mini-LCD displays, physical Select\/Mute\/Solo buttons per channel, and 16 mix layers (Layers) for analog-style workflow. LV1 Classic stands out with 8 mute groups, 16 linked DCA with Spill function, advanced Matrix routing, and full SoundGrid integration for IONIC 16\/24 stageboxes. The console includes remote control apps MyFOH (FOH) and MyMon (monitors), dual redundant power supplies, and fail-safe connectivity for touring reliability.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e64 mono\/stereo channels (128 inputs), 44 mono\/stereo buses\u003c\/li\u003e\n\u003cli\u003e32-bit floating point engine, 0.8 ms latency (44.1-96 kHz)\u003c\/li\u003e\n\u003cli\u003e16 Waves Signature Preamps + 12 onboard line outputs\u003c\/li\u003e\n\u003cli\u003e17x 100mm Alps motorized faders + 21.5\" multi-touchscreen\u003c\/li\u003e\n\u003cli\u003e16 built-in Waves processors (no external DSP required)\u003c\/li\u003e\n\u003cli\u003e8 mute groups, 16 DCA with Spill, 16 mix layers\u003c\/li\u003e\n\u003cli\u003e4x SoundGrid (2x Ethercon, 2x RJ45), AES3 I\/O, HDMI\u003c\/li\u003e\n\u003cli\u003eDual power supplies, 17.2 kg weight, 559x401x561 mm dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 64 mono\/stereo (expandable to 80\/160)\u003c\/li\u003e\n\u003cli\u003eBuses: 44 mono\/stereo (expandable to 52)\u003c\/li\u003e\n\u003cli\u003eEngine: 32-bit Float, 0.8 ms latency\u003c\/li\u003e\n\u003cli\u003eAD Converters: Waves Signature Preamps (16x)\u003c\/li\u003e\n\u003cli\u003eDisplay: 21.5\" HD Multi-Touch\u003c\/li\u003e\n\u003cli\u003eFaders: 17x 100mm Alps Motorized\u003c\/li\u003e\n\u003cli\u003eProcessors: 16x Built-in Waves (Tune RT, F6, eMo Suite, etc.)\u003c\/li\u003e\n\u003cli\u003eI\/O: 16 Mic\/Line In, 12 Line Out, 1x AES3 In, 2x AES3 Out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Waves","offers":[{"title":"Default Title","offer_id":58444614795596,"sku":"58291","price":9351.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/WaveseMotionLV1Classic1.jpg?v=1786979953"},{"product_id":"waves-soundgrid-ionic-24-stagebox","title":"Waves Soundgrid IONIC 24 Stagebox","description":"\u003cdiv lang=\"pl\"\u003e\n\u003cp\u003e\u003cstrong\u003eWaves SoundGrid IONIC 24\u003c\/strong\u003e to flagowy stagebox SoundGrid (24 wejścia \/ 18 wyjść), zaprojektowany dla profesjonalnych aplikacji live, oferujący najwyższą jakość dźwięku i pełną integrację z systemami Waves eMotion LV1. Wyposażony w 24 autorskie przedwzmacniacze \u003cem\u003eWaves Signature Preamps\u003c\/em\u003e oparte na w pełni dyskretnych układach analogowych, IONIC 24 zapewnia wyjątkowy headroom, błyskawiczną reakcję na transjenty i ekstremalnie niski poziom szumów. Kluczową funkcją jest przełączalna impedancja wejściowa (Classic 2kΩ \/ Modern 7kΩ) oraz opcjonalna emulacja analogowego nasycenia harmonicznego na każdym kanale, dodająca ciepło i charakter \"lampowy\" już na etapie przedwzmacniacza.\u003c\/p\u003e\n\u003cp\u003eStagebox oferuje 18 krystalicznie czystych wyjść liniowych z regulowanym poziomem (+18\/+24 dBu), dwa niezależne wyjścia słuchawkowe wysokiej mocy oraz stereofoniczne złącza AES3 In\/Out. Solidna konstrukcja 3U rack z opcjonalnym redundantnym zasilaniem czyni IONIC 24 niezawodnym rozwiązaniem dla tras koncertowych i dużych instalacji. Pełna zdalna kontrola parametrów przedwzmacniaczy (gain, phantom, pad, harmonic enhancement) dostępna jest bezpośrednio z miksera LV1 poprzez sieć SoundGrid (1GbE), zapewniając ultra-niską latencję i natychmiastową reakcję.\u003c\/p\u003e\n\u003ch3\u003eKLUCZOWE CECHY\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24 wejść mikrofonowo-liniowych z Waves Signature Preamps\u003c\/li\u003e\n\u003cli\u003e18 wyjść liniowych (+18\/+24 dBu, regulacja gain)\u003c\/li\u003e\n\u003cli\u003eDyskretne przedwzmacniacze z analogowym harmonic enhancement\u003c\/li\u003e\n\u003cli\u003ePrzełączalna impedancja: Classic 2kΩ \/ Modern 7kΩ\u003c\/li\u003e\n\u003cli\u003eStereo AES3 In + 2x Stereo AES3 Out\u003c\/li\u003e\n\u003cli\u003e2 niezależne wyjścia słuchawkowe wysokiej mocy\u003c\/li\u003e\n\u003cli\u003ePełna integracja SoundGrid z eMotion LV1 (kontrola z LV1 rack)\u003c\/li\u003e\n\u003cli\u003eObsługa do 96 kHz, 3U rack z redundantnym zasilaniem\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSPECYFIKACJA TECHNICZNA\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWejścia: 24x XLR\/TRS Combo (Mic\/Line, +48V Phantom)\u003c\/li\u003e\n\u003cli\u003eWyjścia: 18x XLR Line Out\u003c\/li\u003e\n\u003cli\u003ePasmo przenoszenia: 10 Hz - 40 kHz (+0.1\/-1.0 dB @ 96kHz)\u003c\/li\u003e\n\u003cli\u003eDynamika A\/D: \u0026gt;110 dB, EIN: -130 dBu (60dB gain)\u003c\/li\u003e\n\u003cli\u003eTHD+N: -100 dB (0 dB gain)\u003c\/li\u003e\n\u003cli\u003eCzęstotliwości próbkowania: 44.1\/48\/88.2\/96 kHz\u003c\/li\u003e\n\u003cli\u003eZłącza cyfrowe: 1x AES3 In\/Out, 1x SoundGrid RJ45\u003c\/li\u003e\n\u003cli\u003eWymiary: 3U Rack (482 x 320 x 133 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Waves","offers":[{"title":"Default Title","offer_id":58444614861132,"sku":"55235","price":3640.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/WavesSoundgridIONIC24Stagebox1.jpg?v=1786979954"},{"product_id":"alphatheta-djm-v5","title":"AlphaTheta DJM-V5","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAlphaTheta DJM-V5\u003c\/strong\u003e is a next-generation professional 3-channel DJ mixer that distills the design philosophy of the flagship DJM-V10 into a compact powerhouse. It delivers a high-resolution, warm sound character thanks to studio-grade 96 kHz \/ 64-bit mixing DSP processing and high-quality 32-bit A\/D and D\/A converters from ESS Technology. The unit features advanced sound-sculpting tools, including a precise 4-band EQ and 60mm long-throw faders inherited from the V10-LF, now enhanced with a new \u003cem\u003eSoft Mix Curve\u003c\/em\u003e for smoother, more natural blends.\u003c\/p\u003e\n\u003cp\u003eThe mixer boasts an expanded effects section with 6 Send FX types (including Shimmer, PingPong, and Tape Echo) and three filter modes per channel: Low-Pass, High-Pass, and the newly developed \u003cem\u003eCross-Pass Filter\u003c\/em\u003e. A standout feature is the built-in SonicLink transmitter, enabling ultra-low-latency wireless monitoring when paired with HDJ-F10 headphones. With full PRO DJ LINK support and seamless integration with rekordbox, the DJM-V5 serves as a comprehensive creative hub for artists demanding uncompromising quality in a streamlined format.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional 3-channel mixer with 96 kHz \/ 64-bit architecture\u003c\/li\u003e\n\u003cli\u003eHigh-quality 32-bit A\/D and D\/A converters by ESS Technology\u003c\/li\u003e\n\u003cli\u003e4-Band EQ on every channel for precise frequency control\u003c\/li\u003e\n\u003cli\u003e60mm long-throw faders with new Soft Mix Curve functionality\u003c\/li\u003e\n\u003cli\u003e6 Send FX: Short Delay, Reverb, Shimmer, Tape Echo, PingPong, Echo-Verb\u003c\/li\u003e\n\u003cli\u003e3 Filter modes: HPF, LPF, and the all-new Cross-Pass Filter\u003c\/li\u003e\n\u003cli\u003eBuilt-in SonicLink transmitter for wireless low-latency monitoring\u003c\/li\u003e\n\u003cli\u003eFull PRO DJ LINK support and DVS compatibility (rekordbox, Serato DJ Pro)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 3 Audio, 1 Mic\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz – 40 kHz (LINE)\u003c\/li\u003e\n\u003cli\u003eS\/N Ratio: 110 dB (USB), 105 dB (LINE), 88 dB (PHONO)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: 0.005% (LINE-MASTER1)\u003c\/li\u003e\n\u003cli\u003eInputs: 3x DIGITAL (Coaxial), 3x LINE (RCA), 3x PHONO (RCA), 1x MIC (XLR\/TRS)\u003c\/li\u003e\n\u003cli\u003eOutputs: 2x MASTER (XLR, RCA), 1x BOOTH (TRS), 1x REC (RCA), 2x Phones\u003c\/li\u003e\n\u003cli\u003eDimensions: 302 × 437.6 × 107.9 mm (11.89″ × 17.22″ × 4.25″)\u003c\/li\u003e\n\u003cli\u003eWeight: 8.0 kg (17.6 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"AlphaTheta","offers":[{"title":"Default Title","offer_id":58444618858828,"sku":"58837","price":2019.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/AlphaThetaDJM-V51.jpg?v=1786980009"},{"product_id":"rode-rodecaster-video-s","title":"Rode RODECaster Video S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eRØDECaster Video S\u003c\/strong\u003e – an all-in-one production console that combines video switching, recording, and professional audio mixing into a single streamlined device. Designed for podcasters and streamers, it allows for the creation of complex productions without the need for an external computer or complicated wiring.\u003c\/p\u003e\n\n\u003cp\u003eThe unit supports up to four video sources (HDMI, USB cameras) and enables instant switching between five configurable scenes. A key innovation is the intelligent audio-based auto-switching, which automatically changes cameras based on who is speaking. The audio system features ultra-low-noise Revolution Preamps™ and studio-grade APHEX® processing, delivering crystal-clear, broadcast-ready sound.\u003c\/p\u003e\n\n\u003cp\u003eRØDECaster Video S offers unmatched flexibility: it includes built-in receivers for RØDE Series IV wireless microphones, dual USB interfaces for connecting multiple computers, and direct streaming capabilities via Wi-Fi or Ethernet. The ISO recording function allows each video source to be saved separately to an SSD, providing complete freedom in post-production.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll-in-one video and audio production console with intuitive controls\u003c\/li\u003e\n\u003cli\u003eSupports 4 video sources (3 × HDMI, 1 × USB-C) and 5 scenes\u003c\/li\u003e\n\u003cli\u003eProfessional audio: Revolution Preamps™ and APHEX® processing (EQ, Compressor)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dual wireless receivers for RØDE Series IV microphones\u003c\/li\u003e\n\u003cli\u003eIntelligent audio-based auto-switching for hands-free camera operation\u003c\/li\u003e\n\u003cli\u003eDirect streaming (RTMP) via Wi-Fi 6 or Ethernet\u003c\/li\u003e\n\u003cli\u003eMulti-track (ISO) recording: separate files for each video and audio input\u003c\/li\u003e\n\u003cli\u003eAdvanced video features: Keying (Chroma\/Luma), Overlays, Transitions\u003c\/li\u003e\n\u003cli\u003eDual USB-C interfaces for dual PC\/Mobile setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVideo Inputs: 3 × HDMI Type-A (1080p), 1 × USB-C (UVC)\u003c\/li\u003e\n\u003cli\u003eVideo Outputs: 1 × HDMI (Program\/Multiview), USB-C (Stream)\u003c\/li\u003e\n\u003cli\u003eAudio Inputs: 2 × Combo XLR\/TRS, 2 × Wireless Series IV\u003c\/li\u003e\n\u003cli\u003eAudio Outputs: 2 × 1\/4\" Headphone, Stereo Line Out\u003c\/li\u003e\n\u003cli\u003eAudio Specs: 48 kHz \/ 24-bit (recording), 32-bit float (processing)\u003c\/li\u003e\n\u003cli\u003eConnectivity: Gigabit Ethernet, Wi-Fi 6 (2.4\/5 GHz), Bluetooth 5.3\u003c\/li\u003e\n\u003cli\u003eRecording: External USB Drive (exFAT), H.264\/MP4, WAV\u003c\/li\u003e\n\u003cli\u003ePower: USB-C PD 45W (20V, 2.25A)\u003c\/li\u003e\n\u003cli\u003eDimensions: 253.5 × 128.4 × 60.2 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 875 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"RODE","offers":[{"title":"Default Title","offer_id":58444625215820,"sku":"58633","price":482.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/RodeRODECasterVideoS1.jpg?v=1786980079"},{"product_id":"api-audio-asm164","title":"API Audio ASM164","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPI Audio ASM164\u003c\/strong\u003e – 16-channel analog summing mixer based on THE BOX® Console summing section, designed for project and home studios. Delivers legendary API sound in a 19-inch rack, with output transformers and 2520 op-amps for warm, punchy tone. Ideal for mixes with depth and channel separation. Enclosure (483 x 44 x 292 mm, 5.4 kg) with DB-25 connectors for easy integration.\u003c\/p\u003e\n\u003cp\u003eASM164 uses 2510 input op-amps, continuous pans with center detent, 31-step level pots, and routing to two stereo buses (Mix-A, Mix-B). Each channel has insert send\/return for outboard processing, global 0 dB bypass, and LED metering. Handles +4 dBu levels with low THD and high headroom for pro mixes.\u003c\/p\u003e\n\u003cp\u003eAs cost-effective mixer, ASM164 blends vintage character with modern flexibility, ready for immediate use.\u003c\/p\u003e\n\u003ch3\u003eMAIN FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 analog summing channels with 2510 op-amps\u003c\/li\u003e\n\u003cli\u003eTwo stereo buses: Mix-A and Mix-B with independent pans\u003c\/li\u003e\n\u003cli\u003e31-step detented level pots\u003c\/li\u003e\n\u003cli\u003eInsert send\/return per channel\u003c\/li\u003e\n\u003cli\u003eGlobal 0 dB bypass for level controls\u003c\/li\u003e\n\u003cli\u003eLED metering\u003c\/li\u003e\n\u003cli\u003eTransformer outputs for API warmth\u003c\/li\u003e\n\u003cli\u003eDB-25 connectors for easy routing\u003c\/li\u003e\n\u003cli\u003e1U rackmount, 5-year warranty\u003c\/li\u003e\n\u003cli\u003eCompatible with DAWs and outboard gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels\u003c\/strong\u003e: 16 analog, balanced, +4 dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOp-Amps\u003c\/strong\u003e: API 2510 input, 2520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePan\u003c\/strong\u003e: Continuous, center detent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel\u003c\/strong\u003e: 31-step detented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert\u003c\/strong\u003e: Send\/return per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: Stereo Mix-A\/B XLR, +26 dBu max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e: 20 Hz–20 kHz (±0.1 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD + N\u003c\/strong\u003e: \u0026lt; 0.002% @ 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise\u003c\/strong\u003e: -94 dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e: 2 x DB-25 input, XLR output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: 90-240 V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D)\u003c\/strong\u003e: 483 x 44 x 292 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5.4 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded\u003c\/strong\u003e: ASM164, manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code\u003c\/strong\u003e: API-ASM164\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"API Audio","offers":[{"title":"Default Title","offer_id":58444640977228,"sku":"55772","price":3828.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/APIAudioASM1641.jpg?v=1786980281"},{"product_id":"native-instruments-traktor-mx2","title":"Native Instruments TRAKTOR MX2","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eNative Instruments TRAKTOR MX2\u003c\/strong\u003e – next-generation 2-channel DJ controller with Traktor Pro 4 included, high-resolution jog wheels, RGB pads, 24-bit\/96 kHz interface, and powerful creative FX and stem tools for professional mixing on the go.\u003c\/p\u003e\n\u003cp\u003eMX2 is a flexible and powerful DJ controller built to evolve with your skills. With a club-style mixer layout, intuitive controls, and the included Traktor Pro 4 software, it gives you everything you need to mix, remix, and perform across any genre. The two touch-sensitive jog wheels offer dual modes for scratching and pitch bending, while 16 RGB pads unlock advanced features like Hotcues, Stems, Pattern Player, and Loops. The bottom shell is RGB-lit for visual feedback during performances.\u003c\/p\u003e\n\u003cp\u003eConnectivity is streamlined with USB-C, RCA and mini-jack main outs, dual headphone jacks (1\/8\" \u0026amp; ¼\"), and a mic input. The built-in 24-bit\/96 kHz sound card ensures studio-quality output at any venue, from club nights to livestreams. A 2-month Beatport streaming subscription is included, letting you dive into DJing instantly without a full music library. Whether you’re just starting out or pushing boundaries with stems and FX, MX2 is your portable gateway to next-level DJ sets.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional 2-channel DJ controller with Traktor Pro 4 included (full version)\u003c\/li\u003e\n\u003cli\u003eClub-standard layout with 3-band EQ, volume meters, and crossfader\u003c\/li\u003e\n\u003cli\u003e2 high-resolution touch-sensitive jog wheels (Turntable and Jog modes)\u003c\/li\u003e\n\u003cli\u003e16 RGB performance pads with 4 pad modes: Hotcues, Stems, Pattern Player, Loops\u003c\/li\u003e\n\u003cli\u003eDeck FX section with 40+ Native Instruments effects\u003c\/li\u003e\n\u003cli\u003eMixer FX with one-dial control of 9 creative effects\u003c\/li\u003e\n\u003cli\u003eRGB backlit bottom shell for visual feedback\u003c\/li\u003e\n\u003cli\u003e24-bit\/96 kHz integrated audio interface\u003c\/li\u003e\n\u003cli\u003eUSB-C connectivity for fast and modern integration\u003c\/li\u003e\n\u003cli\u003eCustomizable LED colors and control assignments\u003c\/li\u003e\n\u003cli\u003eCompatible with iZotope Ozone Maximizer for pro-grade streaming sound\u003c\/li\u003e\n\u003cli\u003eIncludes 2-month free Beatport streaming subscription\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJog Wheels: 2 × touch-sensitive, high-resolution\u003c\/li\u003e\n\u003cli\u003eFaders: 2 channel faders, 1 crossfader, 2 pitch faders\u003c\/li\u003e\n\u003cli\u003eMeters: 2 × VU meters\u003c\/li\u003e\n\u003cli\u003ePads: 16 RGB, 4 modes\u003c\/li\u003e\n\u003cli\u003eButtons: 58 backlit buttons\u003c\/li\u003e\n\u003cli\u003eEncoders: 6\u003c\/li\u003e\n\u003cli\u003ePotentiometers: 21\u003c\/li\u003e\n\u003cli\u003eOutputs: Master Out (RCA, 1\/8\"), Headphone Out (1\/8\" and ¼\")\u003c\/li\u003e\n\u003cli\u003eMic Input: ¼\" jack\u003c\/li\u003e\n\u003cli\u003eUSB: 1 × USB-C\u003c\/li\u003e\n\u003cli\u003eExternal Power: Connector present\u003c\/li\u003e\n\u003cli\u003eAudio Interface: 24-bit\/96 kHz\u003c\/li\u003e\n\u003cli\u003eDimensions: 323.1 × 511.4 × 61.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.73 kg\u003c\/li\u003e\n\u003cli\u003eSystem Requirements: macOS 12–15 or Windows 10\/11, 4 GB RAM, Intel i5 or Apple M1\/M2\/M3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"NATIVE INSTRUMENTS","offers":[{"title":"Default Title","offer_id":58444642156876,"sku":"58281","price":359.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/NativeInstrumentsTRAKTORMX21_52007121-26ad-444c-bc35-20c181b1495a.jpg?v=1786980295"},{"product_id":"teenage-engineering-tx-6-black","title":"Teenage Engineering TX-6 Black","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eTeenage Engineering TX-6 Black\u003c\/strong\u003e – ultra-portable battery-powered mixer and multi-channel audio interface with 6 stereo inputs, configurable knobs, built-in synthesizer, sequencer, and effects. It offers high-resolution 24-bit\/48 kHz audio, flexible routing, and Bluetooth LE connectivity for MIDI sync. On board, there is a rich effects section with reverb, chorus, delay, freeze, tape, filter, distortion, 3-band EQ per channel, compressor, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTeenage Engineering TX-6 Black\u003c\/strong\u003e is an environment for sound creation designed for exploration. It features 6 stereo channels (or 12 mono) with customizable knobs for EQ or other parameters, from simple mixing to complex live performances or studio integration. Flexible routing with MFi for iOS, USB-C for DAWs, and DJ mode for crossfading enables a wide range of configurations – including new features for the Teenage Engineering ecosystem.\u003c\/p\u003e\n\u003cp\u003eModulation is deeply integrated: 4 oscillator waveforms and 4 drum sounds in synth mode, tempo sync, internal tuner, assignable effects sends. Connectivity supports wireless BLE for controlling MIDI devices or syncing sequencer. The mixer offers 8-hour battery life, auto-sleep display, adjustable LED strength, and advanced triggering conditions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 stereo input channels (or 12 mono) with configurable knob layout for 3-band EQ or custom controls\u003c\/li\u003e\n\u003cli\u003eBuilt-in synthesizer and sequencer with 4 oscillator waveforms and 4 synthesized drum sounds\u003c\/li\u003e\n\u003cli\u003e8 built-in effects: reverb, chorus, delay, freeze, tape, filter, distortion\u003c\/li\u003e\n\u003cli\u003ePer-channel 3-band EQ and adjustable compressor\u003c\/li\u003e\n\u003cli\u003e12-channel 24-bit\/48 kHz USB audio\/MIDI interface, MFi compatible for iOS\u003c\/li\u003e\n\u003cli\u003eDJ mode for crossfading between channels 5 and 6\u003c\/li\u003e\n\u003cli\u003eBluetooth Low Energy (BLE) for MIDI device control and sync\u003c\/li\u003e\n\u003cli\u003eRechargeable battery with approximately 8 hours of life\u003c\/li\u003e\n\u003cli\u003eBuilt-in instrument tuner\u003c\/li\u003e\n\u003cli\u003ePortable Field System integration with CM-15, OP-1, TX-6 accessories\u003c\/li\u003e\n\u003cli\u003eIncludes super slimline custom cables for all 6 channels\u003c\/li\u003e\n\u003cli\u003eSturdy CNC aluminum construction with 2K molding, custom encoders and faders\u003c\/li\u003e\n\u003cli\u003eOutputs via 3.5 mm mini jack or removable 6.35 mm adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay: 48x64 pixel monochrome\u003c\/li\u003e\n\u003cli\u003eInputs: 6 stereo (3.5 mm), configurable as 12 mono\u003c\/li\u003e\n\u003cli\u003eOutputs: 2 stereo (3.5 mm main and aux), 1 stereo headphones with headset mic support\u003c\/li\u003e\n\u003cli\u003eAudio Interface: 24-bit\/48 kHz USB, SNR inputs ~102 dBA, outputs \u0026gt;120 dBA (main\/aux), \u0026gt;110 dBA (cue)\u003c\/li\u003e\n\u003cli\u003eMax Input Level: 13 dBu, 3.5 Vrms\u003c\/li\u003e\n\u003cli\u003eMax Output Level: 8 dBu, 2 Vrms (main\/aux); 2 dBu, 1 Vrms (cue)\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB-C (audio\/MIDI), Bluetooth LE\u003c\/li\u003e\n\u003cli\u003eBattery: Rechargeable via USB-C, ~8 hours life\u003c\/li\u003e\n\u003cli\u003eDimensions: 90 mm (102 mm with adapter) x 62 mm x 23 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 160 g \/ 5.6 oz\u003c\/li\u003e\n\u003cli\u003eMaterials: CNC aluminum, 2K molding, custom PCB\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: 0-50°C (32-122°F)\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: 0-30°C (32-86°F)\u003c\/li\u003e\n\u003cli\u003eIncluded: 3.5 mm to 6.35 mm jack adapter, custom cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Teenage Engineering","offers":[{"title":"Default Title","offer_id":58444642320716,"sku":"58047","price":1174.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/TeenageEngineeringTX-6Black.jpg?v=1786980298"},{"product_id":"studiolive®-seria-iii-se-16-cyfrowy-mikser","title":"PreSonus StudioLive Series III SE 16","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive Series III SE 16\u003c\/strong\u003e – 40-channel digital mixer with 17 motorized faders, a 64×64 USB audio interface, and AVB networking compatible with the Milan protocol. It features 32-bit DSP processing, XMAX-Remote preamps, full DAW integration with Studio One Pro, and advanced live mixing and recording capabilities.\u003c\/p\u003e\n\u003cp\u003eThe StudioLive SE 16 is an advanced yet intuitive tool for both stage and studio, combining studio-grade audio quality with maximum functionality. With 17 XMAX-Remote preamps and a 64-channel USB audio interface, this mixer delivers exceptional recording quality and full routing and control flexibility. Motorized faders, seamless integration with Studio One Pro, remote control via UC Surface and QMix-UC, and multitrack SD card recording make it a powerful hub for any audio workflow, from beginner to professional.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e40 channels, 26 buses, 17 touch-sensitive motorized faders\u003c\/li\u003e\n\u003cli\u003e64×64 USB audio interface and SD recorder (up to 34 tracks)\u003c\/li\u003e\n\u003cli\u003eXMAX-Remote preamps with digital recall\u003c\/li\u003e\n\u003cli\u003eAdvanced 32-bit DSP processing with Fat Channel collection\u003c\/li\u003e\n\u003cli\u003eAVB networking compatibility with Milan protocol\u003c\/li\u003e\n\u003cli\u003e16 FlexMixes – AUX, subgroups, or matrix mixes\u003c\/li\u003e\n\u003cli\u003e4 effects slots with advanced reverb and limiter parameters\u003c\/li\u003e\n\u003cli\u003eRemote control via UC Surface and QMix-UC\u003c\/li\u003e\n\u003cli\u003eIntegration with Studio One Pro and Capture – recording, playback, streaming\u003c\/li\u003e\n\u003cli\u003eErgonomic user interface with high-contrast screen and fader overlays\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e32 mono inputs (analog and AVB), 16 XMAX preamps\u003c\/li\u003e\n\u003cli\u003e1 stereo tape input, 2 stereo aux inputs\u003c\/li\u003e\n\u003cli\u003e10 mix outputs: 6 × XLR, 4 × TRS jack\u003c\/li\u003e\n\u003cli\u003e2 TRS monitor outputs, 1 stereo main, 1 mono sum\u003c\/li\u003e\n\u003cli\u003e17 motorized faders (16 channel + 1 main)\u003c\/li\u003e\n\u003cli\u003e4 subgroups, 24 DCA groups, 4 effects buses\u003c\/li\u003e\n\u003cli\u003eFat Channel with 8 compressors and 7 EQs (vintage and classic models)\u003c\/li\u003e\n\u003cli\u003eBuilt-in effects processor – reverb, delay, chorus with advanced control\u003c\/li\u003e\n\u003cli\u003e34-track recording to SD card, with mix and individual channel capture\u003c\/li\u003e\n\u003cli\u003eAVB port for integration with StageBoxes and other Milan devices\u003c\/li\u003e\n\u003cli\u003eUC\/Metro remote access – control via Internet and mobile apps\u003c\/li\u003e\n\u003cli\u003eDimensions: 446 × 583 × 165 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444646875468,"sku":"58647","price":2081.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLiveSE16.jpg?v=1786980343"},{"product_id":"presonus-studiolive-mixer-ar16c-usb","title":"PreSonus StudioLive AR16c","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive AR16c\u003c\/strong\u003e – 18-channel analog mixer with USB-C audio interface, 12 XMAX preamps, SD recorder, Bluetooth 5.0, and built-in effects. Perfect for recording, mixing, and production both on stage and in the studio.\u003c\/p\u003e\n\u003cp\u003eThe StudioLive AR16c combines a classic analog mixer with a modern 24-bit\/96 kHz USB-C audio interface. Equipped with 12 XMAX preamps, the mixer allows recording of each channel along with the main mix simultaneously. It also features an onboard SD recorder, Bluetooth connectivity, Super Channel, a new effects processor with reverb and delay, and comes with a complete recording software package – Studio One Artist and Capture.\u003c\/p\u003e\n\u003cp\u003eThis unit excels as a recording hub in the studio, for band rehearsals, live performances, or podcasts. Its solid construction, extensive set of inputs and outputs, intuitive control, and latency-free effects make the AR16c a versatile and complete tool for creative producers.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e18-channel analog mixer with 24-bit\/96 kHz USB-C audio interface\u003c\/li\u003e\n\u003cli\u003e12 balanced microphone inputs with XMAX preamps\u003c\/li\u003e\n\u003cli\u003e2×2 SD recorder for capturing main mix without a computer\u003c\/li\u003e\n\u003cli\u003eSuper Channel with Bluetooth 5.0, RCA input, 1\/8\" stereo, and SD\/USB playback\u003c\/li\u003e\n\u003cli\u003eStereo effects processor with 16 presets and footswitch bypass input\u003c\/li\u003e\n\u003cli\u003eMic\/Line Boost on stereo channels for classic synths and consumer devices\u003c\/li\u003e\n\u003cli\u003eCompatibility with Studio One Artist DAW and Capture software\u003c\/li\u003e\n\u003cli\u003eMetal chassis and 60 mm faders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudio interface: 18×4, USB 2.0 via USB-C connector\u003c\/li\u003e\n\u003cli\u003eSupported sample rates: up to 96 kHz\u003c\/li\u003e\n\u003cli\u003eMic inputs: 12 XLR with XMAX preamps\u003c\/li\u003e\n\u003cli\u003eLine inputs: 8 mono + 4 stereo pairs\u003c\/li\u003e\n\u003cli\u003eInstrument\/line inputs: 2\u003c\/li\u003e\n\u003cli\u003eInsert: 2 jacks\u003c\/li\u003e\n\u003cli\u003eSuper Channel: Bluetooth 5.0, RCA, stereo 1\/8\", SD\/USB\u003c\/li\u003e\n\u003cli\u003eMonitor outputs: 2 TRS buses\u003c\/li\u003e\n\u003cli\u003eControl Room L\/R outputs with level control\u003c\/li\u003e\n\u003cli\u003eHeadphone output with volume control\u003c\/li\u003e\n\u003cli\u003eEffects processor: stereo, 16 presets\u003c\/li\u003e\n\u003cli\u003eHigh-pass filter: on every channel\u003c\/li\u003e\n\u003cli\u003eEQ: 3-band on mono and stereo channels\u003c\/li\u003e\n\u003cli\u003ePower supply: internal, 90–240 VAC, IEC connector\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0–40˚C\u003c\/li\u003e\n\u003cli\u003eDimensions: 89 × 480 × 397 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444646973772,"sku":"58737","price":550.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLiveAR16cMixer.jpg?v=1786980345"},{"product_id":"presonus-studiolive-mixer-ar12c-usb","title":"Presonus StudioLive AR12c","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive AR12c\u003c\/strong\u003e – 14-channel hybrid analog mixer with 24-bit\/96 kHz USB-C audio interface, 8 XMAX preamps, Bluetooth 5.0, built-in SD recorder, and effects processor with 16 presets – ideal for recording, mixing, podcasts, and live performances.\u003c\/p\u003e\n\u003cp\u003eThe PreSonus StudioLive AR12c is a versatile next-generation mixer that combines classic analog control with digital flexibility. With its 14×4 USB 2.0 audio interface over USB-C, you can record each channel individually along with the main mix in high-resolution 24-bit\/96 kHz. The built-in 2×2 SD recorder enables independent capture of the main mix without a computer, making it a perfect tool for bands, podcasters, and live sound engineers.\u003c\/p\u003e\n\u003cp\u003eThe mixer provides 8 balanced microphone inputs with renowned XMAX preamps, 2 instrument inputs, 4 mono channels, and 4 stereo pairs with 3-band EQ, HPF filters, and solo\/mute functions. Super Channel 13\/14 offers full flexibility: Bluetooth 5.0, RCA, mini-jack, and SD\/USB playback. The built-in effects processor with 16 presets and footswitch option expands creative possibilities. Included Capture and Studio One software provide a complete music production package.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e14×4 USB 2.0 audio interface (USB-C), 24-bit \/ 96 kHz\u003c\/li\u003e\n\u003cli\u003e14-channel analog mixer with 2×2 SD recorder\u003c\/li\u003e\n\u003cli\u003e8 microphone preamps with XMAX, 2 instrument inputs\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0, Super Channel with RCA, mini-jack, and SD\/USB playback\u003c\/li\u003e\n\u003cli\u003e3-band EQ on each channel, HPF filters, solo and mute functions\u003c\/li\u003e\n\u003cli\u003eStereo effects processor with 16 presets and footswitch bypass\u003c\/li\u003e\n\u003cli\u003e2 monitor buses with dedicated sends and TRS outputs\u003c\/li\u003e\n\u003cli\u003eControl Room outputs, headphone output with separate volume control\u003c\/li\u003e\n\u003cli\u003eDurable metal chassis with 60 mm faders\u003c\/li\u003e\n\u003cli\u003eIncluded software: Capture, Studio One Artist, Studio Magic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudio interface: 14×4, 24-bit \/ 96 kHz, USB 2.0 via USB-C\u003c\/li\u003e\n\u003cli\u003eRecorder: 2×2 SD, supports SD\/SDHD cards up to 32 GB\u003c\/li\u003e\n\u003cli\u003eMic inputs: 8 × XLR with XMAX preamps\u003c\/li\u003e\n\u003cli\u003eLine inputs: 12 (4 mono + 4 stereo)\u003c\/li\u003e\n\u003cli\u003eInstrument inputs: 2\u003c\/li\u003e\n\u003cli\u003eSuper Channel: Bluetooth 5.0, RCA, 1\/8″ jack, SD\/USB\u003c\/li\u003e\n\u003cli\u003eMono EQ: 3-band quasi-parametric with mid control\u003c\/li\u003e\n\u003cli\u003eStereo EQ: 3-band semi-parametric\u003c\/li\u003e\n\u003cli\u003eEffects processor: 16 presets, send\/return, footswitch bypass\u003c\/li\u003e\n\u003cli\u003eMonitor buses: 2 with TRS outputs and AFL solo\u003c\/li\u003e\n\u003cli\u003eOutputs: Control Room L\/R, headphone with independent level\u003c\/li\u003e\n\u003cli\u003eMic\/Line Boost on stereo channels\u003c\/li\u003e\n\u003cli\u003eSoftware: Capture, Studio One Artist, Studio Magic FX\u003c\/li\u003e\n\u003cli\u003ePower supply: internal, IEC, 90–240 VAC\u003c\/li\u003e\n\u003cli\u003eDimensions: 89 × 381 × 397 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.4 kg\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0˚–40˚ C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444647072076,"sku":"58782","price":522.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PresonusStudioLiveAR12c.jpg?v=1786980346"},{"product_id":"presonus-studiolive-64s","title":"PreSonus StudioLive 64S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 64S\u003c\/strong\u003e – 64-channel digital console mixer with quad-core FLEX DSP Engine, 128-channel (64x64) USB recording, 76 mixing channels, 43 buses, and 526 simultaneous processors. It offers advanced Fat Channel processing, flexible routing, and 8 FLEX FX buses. On board, there is a rich effects section with reverb and delay, scene management, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 64S\u003c\/strong\u003e is an environment for sound creation designed for live sound, touring, and recording. It features 32 XMAX preamps for inputs ranging from mics to lines, with multitrack recording and customizable FlexMixes. Flexible routing with auxes, subgroups, matrices, and AVB networking enables a wide range of configurations – including new features for the PreSonus ecosystem.\u003c\/p\u003e\n\u003cp\u003eProcessing is deeply integrated: Fat Channel with vintage EQs, compressors, gates, and limiters on every channel and bus, DAW control, support for MCU\/HUI. Recording can be done in real-time via USB, SD card, or Capture software – for automatic multitracking of sources. The mixer offers scene recall, user profiles, DCA groups, and advanced routing options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e64-channel digital mixing console with built-in SD card recorder\u003c\/li\u003e\n\u003cli\u003eQuad-core FLEX DSP engine with 526 simultaneous processors, 43 mix buses, and 76 mixing channels\u003c\/li\u003e\n\u003cli\u003eRecord and play back up to 64 channels via USB\u003c\/li\u003e\n\u003cli\u003eSupports AVB over Ethernet for NSB stage boxes, EarMix 16M monitor mixers, and SW5E switches\u003c\/li\u003e\n\u003cli\u003eBuilt-in SD card support for 34-track multitrack recording and virtual soundchecks\u003c\/li\u003e\n\u003cli\u003eMain Left, Right, and Mono\/Center buses with per-channel mono send level and center divergence control\u003c\/li\u003e\n\u003cli\u003eFully recallable XMAX preamps with ultra-low noise floor\u003c\/li\u003e\n\u003cli\u003e33 touch-sensitive motorized faders\u003c\/li\u003e\n\u003cli\u003e24 DCA groups for managing complex productions\u003c\/li\u003e\n\u003cli\u003eFLEX FX multi-effects processor with 8 slots of reverb emulations and delays and 8 dedicated effects buses\u003c\/li\u003e\n\u003cli\u003eFat Channel processing with vintage EQ and compression options for each channel\u003c\/li\u003e\n\u003cli\u003eBetter visual feedback with 7\" full-color touchscreen and channel scribble strips\u003c\/li\u003e\n\u003cli\u003eAdvanced scene management for efficient mixing tasks\u003c\/li\u003e\n\u003cli\u003e32 Flex Mixes configurable as aux mixes, subgroups, or matrix mixes\u003c\/li\u003e\n\u003cli\u003eDAW control with advanced Studio One integration, MCU emulation for Logic, and HUI emulation for Pro Tools\u003c\/li\u003e\n\u003cli\u003eBundled software: Studio One Artist or Studio One+ Hybrid, Capture, UC Surface, QMix-UC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Digital Mixer\u003c\/li\u003e\n\u003cli\u003eChannels: 64\u003c\/li\u003e\n\u003cli\u003eInputs - Mic Preamps: 32 x XLR-1\/4\" combo (mic\/line)\u003c\/li\u003e\n\u003cli\u003ePhantom Power: 32 Channels\u003c\/li\u003e\n\u003cli\u003eInputs - Line: 1 x Dual RCA Stereo (tape), 4 x 1\/4\" (2 x stereo aux in)\u003c\/li\u003e\n\u003cli\u003eOutputs - Main: 2 x XLR (main out), 1 x XLR (mono\/center), 2 x 1\/4\" (monitor)\u003c\/li\u003e\n\u003cli\u003eOutputs - Other: 16 x XLR (mix out), 1 x Dual RCA Stereo (tape)\u003c\/li\u003e\n\u003cli\u003eOutputs - Digital: 1 x XLR (AES\/EBU)\u003c\/li\u003e\n\u003cli\u003eBusses\/Groups: 32 x FlexMix Buses (aux, subgroup, matrix), 43 total mix buses, 24 x DCA groups\u003c\/li\u003e\n\u003cli\u003eTalkback: 1 x XLR (phantom power)\u003c\/li\u003e\n\u003cli\u003eData I\/O: 1 x Locking Ethernet (AVB audio network), 1 x RJ45 (network control)\u003c\/li\u003e\n\u003cli\u003eHeadphones: 1 x 1\/4\"\u003c\/li\u003e\n\u003cli\u003eUSB: 1 x Type B (64 x 64)\u003c\/li\u003e\n\u003cli\u003eComputer Connectivity: USB 2.0\u003c\/li\u003e\n\u003cli\u003eBluetooth: v4.1\u003c\/li\u003e\n\u003cli\u003eFaders: 33 x Touch-sensitive motorized faders\u003c\/li\u003e\n\u003cli\u003eA\/D Resolution: 24-bit\/48kHz\u003c\/li\u003e\n\u003cli\u003eEffects: FLEX FX Multi-effects processor, 8 x effects slots, 8 x effects buses\u003c\/li\u003e\n\u003cli\u003eSignal Processing: Fat Channel plug-ins, 10 x EQs, 10 x Compressors\u003c\/li\u003e\n\u003cli\u003eFeatures: Metro remote-control (UC 4.2)\u003c\/li\u003e\n\u003cli\u003eTransport Controls: Yes\u003c\/li\u003e\n\u003cli\u003eDAW Control: Advanced Studio One, MCU Logic emulation, HUI Pro Tools emulation\u003c\/li\u003e\n\u003cli\u003eScreen: 7\" Touchscreen\u003c\/li\u003e\n\u003cli\u003eStorage: SD card recorder (34 track)\u003c\/li\u003e\n\u003cli\u003eSoftware: Studio One Pro, PreSonus Capture, UC Surface\u003c\/li\u003e\n\u003cli\u003ePower Source: Standard IEC AC cable\u003c\/li\u003e\n\u003cli\u003eHeight: 6.51\"\u003c\/li\u003e\n\u003cli\u003eDepth: 22.97\"\u003c\/li\u003e\n\u003cli\u003eWidth: 32.37\"\u003c\/li\u003e\n\u003cli\u003eWeight: 37.2 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444647727436,"sku":"58743","price":2584.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLive64S1.jpg?v=1786980347"},{"product_id":"presonus-studiolive-32sx","title":"PreSonus StudioLive 32SX","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 32SX\u003c\/strong\u003e – compact 40-channel digital mixer with dual-core FLEX DSP Engine, 128-channel (64x64) USB recording, 32 mixing channels, 26 buses, and 286 simultaneous processors. It offers advanced Fat Channel processing, flexible routing, and 4 FLEX FX buses. On board, there is a rich effects section with reverb and delay, scene management, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 32SX\u003c\/strong\u003e is an environment for sound creation designed for live sound, touring, and recording. It features 32 XMAX preamps for inputs ranging from mics to lines, with multitrack recording and customizable FlexMixes. Flexible routing with auxes, subgroups, matrices, and AVB networking enables a wide range of configurations – including new features for the PreSonus ecosystem.\u003c\/p\u003e\n\u003cp\u003eProcessing is deeply integrated: Fat Channel with vintage EQs, compressors, gates, and limiters on every channel and bus, DAW control, support for MCU\/HUI. Recording can be done in real-time via USB, SD card, or Capture software – for automatic multitracking of sources. The mixer offers scene recall, user profiles, DCA groups, and advanced routing options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e40-channel digital mixing console with built-in SD card recorder\u003c\/li\u003e\n\u003cli\u003eDual-core FLEX DSP engine with 286 simultaneous processors, 26 mix buses, and 32 mixing channels\u003c\/li\u003e\n\u003cli\u003eRecord and play back up to 64 channels via USB\u003c\/li\u003e\n\u003cli\u003eSupports AVB over Ethernet for NSB stage boxes, EarMix 16M monitor mixers, and SW5E switches\u003c\/li\u003e\n\u003cli\u003eBuilt-in SD card support for 34-track multitrack recording and virtual soundchecks\u003c\/li\u003e\n\u003cli\u003eMain Left, Right, and Mono\/Center buses with per-channel mono send level and center divergence control\u003c\/li\u003e\n\u003cli\u003eFully recallable XMAX preamps with ultra-low noise floor\u003c\/li\u003e\n\u003cli\u003e25 touch-sensitive motorized faders with split-fader workflow\u003c\/li\u003e\n\u003cli\u003e24 DCA groups for managing complex productions\u003c\/li\u003e\n\u003cli\u003eFLEX FX multi-effects processor with 4 slots of reverb emulations and delays and 4 dedicated effects buses\u003c\/li\u003e\n\u003cli\u003eFat Channel processing with vintage EQ and compression options for each channel\u003c\/li\u003e\n\u003cli\u003e7\" full-color touchscreen and channel scribble strips for visual feedback\u003c\/li\u003e\n\u003cli\u003eAdvanced scene management for efficient mixing tasks\u003c\/li\u003e\n\u003cli\u003e16 FlexMixes configurable as aux mixes, subgroups, or matrix mixes\u003c\/li\u003e\n\u003cli\u003eDAW control with advanced Studio One integration, MCU emulation for Logic, and HUI emulation for Pro Tools\u003c\/li\u003e\n\u003cli\u003eBundled software: Studio One Artist, Capture, UC Surface, QMix-UC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Digital Mixer\u003c\/li\u003e\n\u003cli\u003eChannels: 40\u003c\/li\u003e\n\u003cli\u003eInputs - Mic Preamps: 32 x XLR\/TRS combo (mic\/line)\u003c\/li\u003e\n\u003cli\u003ePhantom Power: 32 Channels\u003c\/li\u003e\n\u003cli\u003eInputs - Line: 2 x RCA (stereo tape in), 4 x 1\/4\" TRS (2 stereo aux returns)\u003c\/li\u003e\n\u003cli\u003eOutputs - Main: 2 x XLR (L\/R), 1 x XLR (mono\/center), 2 x 1\/4\" TRS (monitor)\u003c\/li\u003e\n\u003cli\u003eOutputs - Other: 16 x XLR (mix outs), 2 x RCA (stereo tape out)\u003c\/li\u003e\n\u003cli\u003eOutputs - Digital: 1 x XLR (AES\/EBU)\u003c\/li\u003e\n\u003cli\u003eBuses\/Groups: 16 x FlexMix (aux\/subgroup\/matrix), 4 x FX, 4 x Subgroup, 26 total buses, 24 x DCA groups\u003c\/li\u003e\n\u003cli\u003eTalkback: 1 x XLR with phantom power\u003c\/li\u003e\n\u003cli\u003eData I\/O: 1 x Ethernet (AVB), 1 x RJ45 (control)\u003c\/li\u003e\n\u003cli\u003eHeadphones: 1 x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eUSB: 1 x Type B (64x64 interface)\u003c\/li\u003e\n\u003cli\u003eComputer Connectivity: USB 2.0\u003c\/li\u003e\n\u003cli\u003eBluetooth: v4.1\u003c\/li\u003e\n\u003cli\u003eFaders: 25 x 100mm touch-sensitive motorized\u003c\/li\u003e\n\u003cli\u003eA\/D Resolution: 24-bit\/48kHz\u003c\/li\u003e\n\u003cli\u003eEffects: FLEX FX with 4 slots, 4 buses (reverb, delay)\u003c\/li\u003e\n\u003cli\u003eSignal Processing: Fat Channel (EQ, compression, gate, limiter)\u003c\/li\u003e\n\u003cli\u003eScreen: 7\" color touchscreen\u003c\/li\u003e\n\u003cli\u003eStorage: SD card (34-track recorder)\u003c\/li\u003e\n\u003cli\u003eSoftware: Studio One Artist, Capture, UC Surface, QMix-UC\u003c\/li\u003e\n\u003cli\u003ePower Source: Standard IEC AC cable\u003c\/li\u003e\n\u003cli\u003eHeight: 6.5\"\u003c\/li\u003e\n\u003cli\u003eWidth: 25.9\"\u003c\/li\u003e\n\u003cli\u003eDepth: 20.3\"\u003c\/li\u003e\n\u003cli\u003eWeight: 30 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444647792972,"sku":"58729","price":2297.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLive32SX1.jpg?v=1786980349"},{"product_id":"presonus-studiolive-32s","title":"PreSonus StudioLive 32S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 32S\u003c\/strong\u003e – compact 32-channel digital mixer with dual-core FLEX DSP Engine, 128-channel (64x64) USB recording, 40 input channels, 26 buses, and 286 simultaneous processors. It offers advanced Fat Channel processing, flexible routing, and 4 FLEX FX buses. On board, there is a rich effects section with reverb and delay, scene management, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreSonus StudioLive 32S\u003c\/strong\u003e is an environment for sound creation designed for live sound, touring, and recording. It features 32 recallable XMAX preamps (16 on board, expandable via AVB), with multitrack recording and customizable FlexMixes. Flexible routing with auxes, subgroups, matrices, and AVB networking enables a wide range of configurations – including new features for the PreSonus ecosystem.\u003c\/p\u003e\n\u003cp\u003eProcessing is deeply integrated: Fat Channel with vintage-inspired EQs, compressors, gates, and limiters on every channel and bus, DAW control, support for MCU\/HUI. Recording can be done in real-time via USB, SD card, or Capture software – for automatic multitracking of sources. The mixer offers scene recall, user profiles, DCA groups, and advanced routing options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e32-channel digital mixer with built-in SD card recorder\u003c\/li\u003e\n\u003cli\u003eDual-core FLEX DSP engine with 286 simultaneous processors, 26 mix buses, and 40 input channels\u003c\/li\u003e\n\u003cli\u003eRecord and play back up to 64 channels via USB\u003c\/li\u003e\n\u003cli\u003eSupports AVB over Ethernet for NSB stage boxes, EarMix 16M monitor mixers, and SW5E switches\u003c\/li\u003e\n\u003cli\u003eBuilt-in SD card support for 34-track multitrack recording and virtual soundchecks\u003c\/li\u003e\n\u003cli\u003eMain Left, Right, and Mono\/Center buses with per-channel mono send level and center divergence control\u003c\/li\u003e\n\u003cli\u003eFully recallable XMAX preamps with ultra-low noise floor (16 on board, up to 32 via AVB)\u003c\/li\u003e\n\u003cli\u003e33 touch-sensitive motorized faders\u003c\/li\u003e\n\u003cli\u003e24 DCA groups for managing complex productions\u003c\/li\u003e\n\u003cli\u003eFLEX FX multi-effects processor with 4 slots of reverb emulations and delays and 4 dedicated effects buses\u003c\/li\u003e\n\u003cli\u003eFat Channel processing with vintage EQ and compression options for each channel\u003c\/li\u003e\n\u003cli\u003eBetter visual feedback with 7\" full-color touchscreen and channel scribble strips\u003c\/li\u003e\n\u003cli\u003eAdvanced scene management for efficient mixing tasks\u003c\/li\u003e\n\u003cli\u003e16 FlexMixes configurable as aux mixes, subgroups, or matrix mixes\u003c\/li\u003e\n\u003cli\u003eDAW control with advanced Studio One integration, MCU emulation for Logic, and HUI emulation for Pro Tools\u003c\/li\u003e\n\u003cli\u003eBundled software: Studio One Pro, Capture, UC Surface, QMix-UC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Digital Mixer\u003c\/li\u003e\n\u003cli\u003eChannels: 32 (40 inputs total)\u003c\/li\u003e\n\u003cli\u003eInputs - Mic Preamps: 16 x XLR, 16 x XLR-1\/4\" combo (mic\/line)\u003c\/li\u003e\n\u003cli\u003ePhantom Power: 32 Channels\u003c\/li\u003e\n\u003cli\u003eInputs - Line: 2 x RCA (stereo tape), 4 x 1\/4\" (2 x stereo aux returns)\u003c\/li\u003e\n\u003cli\u003eOutputs - Main: 2 x XLR (L\/R), 1 x XLR (mono\/center), 2 x 1\/4\" (monitor)\u003c\/li\u003e\n\u003cli\u003eOutputs - Other: 16 x XLR (FlexMix), 2 x RCA (stereo tape)\u003c\/li\u003e\n\u003cli\u003eOutputs - Digital: 1 x XLR (AES\/EBU)\u003c\/li\u003e\n\u003cli\u003eBuses\/Groups: 16 FlexMix (aux\/subgroup\/matrix), 4 FX, 26 total buses, 24 DCA groups\u003c\/li\u003e\n\u003cli\u003eTalkback: 1 x XLR with phantom power\u003c\/li\u003e\n\u003cli\u003eData I\/O: 1 x Ethernet (AVB), 1 x RJ45 (control)\u003c\/li\u003e\n\u003cli\u003eHeadphones: 1 x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eUSB: 1 x Type B (64x64)\u003c\/li\u003e\n\u003cli\u003eComputer Connectivity: USB 2.0\u003c\/li\u003e\n\u003cli\u003eBluetooth: 4.1\u003c\/li\u003e\n\u003cli\u003eFaders: 33 x touch-sensitive motorized\u003c\/li\u003e\n\u003cli\u003eA\/D Resolution: 24-bit\/48kHz\u003c\/li\u003e\n\u003cli\u003eEffects: FLEX FX with 4 slots, 4 buses (reverb, delay)\u003c\/li\u003e\n\u003cli\u003eSignal Processing: Fat Channel (EQ, compression, gate, limiter)\u003c\/li\u003e\n\u003cli\u003eScreen: 7\" color touchscreen\u003c\/li\u003e\n\u003cli\u003eStorage: SD card (34-track)\u003c\/li\u003e\n\u003cli\u003eSoftware: Studio One Pro, Capture, UC Surface, QMix-UC\u003c\/li\u003e\n\u003cli\u003ePower Source: Standard IEC AC cable\u003c\/li\u003e\n\u003cli\u003eHeight: 6.5\"\u003c\/li\u003e\n\u003cli\u003eWidth: 25.9\"\u003c\/li\u003e\n\u003cli\u003eDepth: 20.3\"\u003c\/li\u003e\n\u003cli\u003eWeight: 30 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":58444647858508,"sku":"58803","price":2289.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/files\/PreSonusStudioLive32S1.jpg?v=1786980350"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/9854\/1644\/collections\/audint.png?v=1694616760","url":"https:\/\/noiseroom.lt\/collections\/digital-mixing-desks.oembed","provider":"Noise Room","version":"1.0","type":"link"}